[PATCH 1/6] media: staging: media: imx6-mipi-csi2: replace space with tab for alignment

[Frank Li <Frank.Li@nxp.com>]

Replace space with tab to follow coding convention. No functional change.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 drivers/staging/media/imx/imx6-mipi-csi2.c | 92 +++++++++++++++---------------
 1 file changed, 46 insertions(+), 46 deletions(-)

diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
index dd8c7b3233bccfc34b59e0f0ff813b36752e1526..42256441b881d9f132ad7ff899d6f1e35643b4ac 100644
--- a/drivers/staging/media/imx/imx6-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
@@ -23,65 +23,65 @@
  * there must be 5 pads: 1 input pad from sensor, and
  * the 4 virtual channel output pads
  */
-#define CSI2_SINK_PAD       0
-#define CSI2_NUM_SINK_PADS  1
-#define CSI2_NUM_SRC_PADS   4
-#define CSI2_NUM_PADS       5
+#define CSI2_SINK_PAD		0
+#define CSI2_NUM_SINK_PADS	1
+#define CSI2_NUM_SRC_PADS	4
+#define CSI2_NUM_PADS		5
 
 /*
  * The default maximum bit-rate per lane in Mbps, if the
  * source subdev does not provide V4L2_CID_LINK_FREQ.
  */
-#define CSI2_DEFAULT_MAX_MBPS 849
+#define CSI2_DEFAULT_MAX_MBPS	849
 
 struct csi2_dev {
-	struct device          *dev;
-	struct v4l2_subdev      sd;
-	struct v4l2_async_notifier notifier;
-	struct media_pad       pad[CSI2_NUM_PADS];
-	struct clk             *dphy_clk;
-	struct clk             *pllref_clk;
-	struct clk             *pix_clk; /* what is this? */
-	void __iomem           *base;
-
-	struct v4l2_subdev	*remote;
-	unsigned int		remote_pad;
-	unsigned short		data_lanes;
+	struct device			*dev;
+	struct v4l2_subdev		sd;
+	struct v4l2_async_notifier	notifier;
+	struct media_pad		pad[CSI2_NUM_PADS];
+	struct clk			*dphy_clk;
+	struct clk			*pllref_clk;
+	struct clk			*pix_clk; /* what is this? */
+	void __iomem			*base;
+
+	struct v4l2_subdev		*remote;
+	unsigned int			remote_pad;
+	unsigned short			data_lanes;
 
 	/* lock to protect all members below */
-	struct mutex lock;
+	struct mutex			lock;
 
-	struct v4l2_mbus_framefmt format_mbus;
+	struct v4l2_mbus_framefmt	format_mbus;
 
-	int                     stream_count;
-	struct v4l2_subdev      *src_sd;
-	bool                    sink_linked[CSI2_NUM_SRC_PADS];
+	int				stream_count;
+	struct v4l2_subdev		*src_sd;
+	bool				sink_linked[CSI2_NUM_SRC_PADS];
 };
 
 #define DEVICE_NAME "imx6-mipi-csi2"
 
 /* Register offsets */
-#define CSI2_VERSION            0x000
-#define CSI2_N_LANES            0x004
-#define CSI2_PHY_SHUTDOWNZ      0x008
-#define CSI2_DPHY_RSTZ          0x00c
-#define CSI2_RESETN             0x010
-#define CSI2_PHY_STATE          0x014
-#define PHY_STOPSTATEDATA_BIT   4
-#define PHY_STOPSTATEDATA(n)    BIT(PHY_STOPSTATEDATA_BIT + (n))
-#define PHY_RXCLKACTIVEHS       BIT(8)
-#define PHY_RXULPSCLKNOT        BIT(9)
-#define PHY_STOPSTATECLK        BIT(10)
-#define CSI2_DATA_IDS_1         0x018
-#define CSI2_DATA_IDS_2         0x01c
-#define CSI2_ERR1               0x020
-#define CSI2_ERR2               0x024
-#define CSI2_MSK1               0x028
-#define CSI2_MSK2               0x02c
-#define CSI2_PHY_TST_CTRL0      0x030
+#define CSI2_VERSION		0x000
+#define CSI2_N_LANES		0x004
+#define CSI2_PHY_SHUTDOWNZ	0x008
+#define CSI2_DPHY_RSTZ		0x00c
+#define CSI2_RESETN		0x010
+#define CSI2_PHY_STATE		0x014
+#define PHY_STOPSTATEDATA_BIT	4
+#define PHY_STOPSTATEDATA(n)	BIT(PHY_STOPSTATEDATA_BIT + (n))
+#define PHY_RXCLKACTIVEHS	BIT(8)
+#define PHY_RXULPSCLKNOT	BIT(9)
+#define PHY_STOPSTATECLK	BIT(10)
+#define CSI2_DATA_IDS_1		0x018
+#define CSI2_DATA_IDS_2		0x01c
+#define CSI2_ERR1		0x020
+#define CSI2_ERR2		0x024
+#define CSI2_MSK1		0x028
+#define CSI2_MSK2		0x02c
+#define CSI2_PHY_TST_CTRL0	0x030
 #define PHY_TESTCLR		BIT(0)
 #define PHY_TESTCLK		BIT(1)
-#define CSI2_PHY_TST_CTRL1      0x034
+#define CSI2_PHY_TST_CTRL1	0x034
 #define PHY_TESTEN		BIT(16)
 /*
  * i.MX CSI2IPU Gasket registers follow. The CSI2IPU gasket is
@@ -106,13 +106,13 @@ static inline struct csi2_dev *notifier_to_dev(struct v4l2_async_notifier *n)
  * reference manual is as follows:
  *
  * 1. Deassert presetn signal (global reset).
- *        It's not clear what this "global reset" signal is (maybe APB
- *        global reset), but in any case this step would be probably
- *        be carried out during driver load in csi2_probe().
+ *	It's not clear what this "global reset" signal is (maybe APB
+ *	global reset), but in any case this step would be probably
+ *	be carried out during driver load in csi2_probe().
  *
  * 2. Configure MIPI Camera Sensor to put all Tx lanes in LP-11 state.
- *        This must be carried out by the MIPI sensor's s_power(ON) subdev
- *        op.
+ *	This must be carried out by the MIPI sensor's s_power(ON) subdev
+ *	op.
  *
  * 3. D-PHY initialization.
  * 4. CSI2 Controller programming (Set N_LANES, deassert PHY_SHUTDOWNZ,

-- 
2.34.1