From: Frank Li <Frank.Li@nxp.com>
To: Steve Longerbeam <slongerbeam@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: imx@lists.linux.dev, linux-media@vger.kernel.org,
linux-staging@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH 5/6] media: staging: media: imx6-mipi-csi2: use guard() to simplify code
Date: Fri, 07 Nov 2025 15:44:36 -0500 [thread overview]
Message-ID: <20251107-stage-csi2-cleanup-v1-5-5d42535243ac@nxp.com> (raw)
In-Reply-To: <20251107-stage-csi2-cleanup-v1-0-5d42535243ac@nxp.com>
Use guard() to simplify mutex locking. No functional change.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
drivers/staging/media/imx/imx6-mipi-csi2.c | 54 +++++++++++-------------------
1 file changed, 19 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
index f8d0b3b8b250774af51f2aba731e639131aceff9..54e9491d3428686288a5bc9bb58a5a0a25aca696 100644
--- a/drivers/staging/media/imx/imx6-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
@@ -413,21 +413,17 @@ static int csi2_s_stream(struct v4l2_subdev *sd, int enable)
struct csi2_dev *csi2 = sd_to_dev(sd);
int i, ret = 0;
- mutex_lock(&csi2->lock);
+ guard(mutex)(&csi2->lock);
- if (!csi2->src_sd) {
- ret = -EPIPE;
- goto out;
- }
+ if (!csi2->src_sd)
+ return -EPIPE;
for (i = 0; i < CSI2_NUM_SRC_PADS; i++) {
if (csi2->sink_linked[i])
break;
}
- if (i >= CSI2_NUM_SRC_PADS) {
- ret = -EPIPE;
- goto out;
- }
+ if (i >= CSI2_NUM_SRC_PADS)
+ return -EPIPE;
/*
* enable/disable streaming only if stream_count is
@@ -442,14 +438,12 @@ static int csi2_s_stream(struct v4l2_subdev *sd, int enable)
else
csi2_stop(csi2);
if (ret)
- goto out;
+ return ret;
update_count:
csi2->stream_count += enable ? 1 : -1;
if (csi2->stream_count < 0)
csi2->stream_count = 0;
-out:
- mutex_unlock(&csi2->lock);
return ret;
}
@@ -467,32 +461,28 @@ static int csi2_link_setup(struct media_entity *entity,
remote_sd = media_entity_to_v4l2_subdev(remote->entity);
- mutex_lock(&csi2->lock);
+ guard(mutex)(&csi2->lock);
if (local->flags & MEDIA_PAD_FL_SOURCE) {
if (flags & MEDIA_LNK_FL_ENABLED) {
- if (csi2->sink_linked[local->index - 1]) {
- ret = -EBUSY;
- goto out;
- }
+ if (csi2->sink_linked[local->index - 1])
+ return -EBUSY;
+
csi2->sink_linked[local->index - 1] = true;
} else {
csi2->sink_linked[local->index - 1] = false;
}
} else {
if (flags & MEDIA_LNK_FL_ENABLED) {
- if (csi2->src_sd) {
- ret = -EBUSY;
- goto out;
- }
+ if (csi2->src_sd)
+ return -EBUSY;
+
csi2->src_sd = remote_sd;
} else {
csi2->src_sd = NULL;
}
}
-out:
- mutex_unlock(&csi2->lock);
return ret;
}
@@ -513,14 +503,12 @@ static int csi2_get_fmt(struct v4l2_subdev *sd,
struct csi2_dev *csi2 = sd_to_dev(sd);
struct v4l2_mbus_framefmt *fmt;
- mutex_lock(&csi2->lock);
+ guard(mutex)(&csi2->lock);
fmt = __csi2_get_fmt(csi2, sd_state, sdformat->pad, sdformat->which);
sdformat->format = *fmt;
- mutex_unlock(&csi2->lock);
-
return 0;
}
@@ -530,17 +518,14 @@ static int csi2_set_fmt(struct v4l2_subdev *sd,
{
struct csi2_dev *csi2 = sd_to_dev(sd);
struct v4l2_mbus_framefmt *fmt;
- int ret = 0;
if (sdformat->pad >= CSI2_NUM_PADS)
return -EINVAL;
- mutex_lock(&csi2->lock);
+ guard(mutex)(&csi2->lock);
- if (csi2->stream_count > 0) {
- ret = -EBUSY;
- goto out;
- }
+ if (csi2->stream_count > 0)
+ return -EBUSY;
/* Output pads mirror active input pad, no limits on input pads */
if (sdformat->pad != CSI2_SINK_PAD)
@@ -549,9 +534,8 @@ static int csi2_set_fmt(struct v4l2_subdev *sd,
fmt = __csi2_get_fmt(csi2, sd_state, sdformat->pad, sdformat->which);
*fmt = sdformat->format;
-out:
- mutex_unlock(&csi2->lock);
- return ret;
+
+ return 0;
}
static int csi2_registered(struct v4l2_subdev *sd)
--
2.34.1
next prev parent reply other threads:[~2025-11-07 20:45 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-07 20:44 [PATCH 0/6] media: staging: media: imx6-mipi-csi2: trivial cleanup to prepare convert to common dw mipi csi2 Frank Li
2025-11-07 20:44 ` [PATCH 1/6] media: staging: media: imx6-mipi-csi2: replace space with tab for alignment Frank Li
2025-11-10 8:28 ` Philipp Zabel
2025-11-07 20:44 ` [PATCH 2/6] media: staging: media: imx6-mipi-csi2: use devm_add_action_or_reset() to simplify code Frank Li
2025-11-10 8:28 ` Philipp Zabel
2025-11-10 15:39 ` Frank Li
2025-11-07 20:44 ` [PATCH 3/6] media: staging: media: imx6-mipi-csi2: use devm_clk_bulk_get_all() to fetch clocks Frank Li
2025-11-10 8:22 ` Philipp Zabel
2025-11-10 15:20 ` Frank Li
2025-11-07 20:44 ` [PATCH 4/6] media: staging: media: imx6-mipi-csi2: use devm_mutex_init() to simplify code Frank Li
2025-11-10 8:23 ` Philipp Zabel
2025-11-07 20:44 ` Frank Li [this message]
2025-11-10 8:27 ` [PATCH 5/6] media: staging: media: imx6-mipi-csi2: use guard() " Philipp Zabel
2025-11-07 20:44 ` [PATCH 6/6] media: staging: media: imx6-mipi-csi2: use devm_platform_ioremap_resource() " Frank Li
2025-11-10 7:59 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251107-stage-csi2-cleanup-v1-5-5d42535243ac@nxp.com \
--to=frank.li@nxp.com \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox