[PATCH 3/5] iio: adc: qcom-spmi-rradc: Simplify with dev_err_probe

[Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>]

Use dev_err_probe() to make error code handling simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 drivers/iio/adc/qcom-spmi-rradc.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-rradc.c b/drivers/iio/adc/qcom-spmi-rradc.c
index b245416bae12..8e75665204d1 100644
--- a/drivers/iio/adc/qcom-spmi-rradc.c
+++ b/drivers/iio/adc/qcom-spmi-rradc.c
@@ -934,20 +934,15 @@ static int rradc_probe(struct platform_device *pdev)
 
 	chip = iio_priv(indio_dev);
 	chip->regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!chip->regmap) {
-		dev_err(dev, "Couldn't get parent's regmap\n");
-		return -EINVAL;
-	}
+	if (!chip->regmap)
+		return dev_err_probe(dev, -EINVAL, "Couldn't get parent's regmap\n");
 
 	chip->dev = dev;
 	mutex_init(&chip->conversion_lock);
 
 	ret = device_property_read_u32(dev, "reg", &chip->base);
-	if (ret < 0) {
-		dev_err(chip->dev, "Couldn't find reg address, ret = %d\n",
-			ret);
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Couldn't find reg address\n");
 
 	batt_id_delay = -1;
 	ret = device_property_read_u32(dev, "qcom,batt-id-delay-ms",
@@ -975,10 +970,9 @@ static int rradc_probe(struct platform_device *pdev)
 
 	/* Get the PMIC revision, we need it to handle some varying coefficients */
 	chip->pmic = qcom_pmic_get(chip->dev);
-	if (IS_ERR(chip->pmic)) {
-		dev_err(chip->dev, "Unable to get reference to PMIC device\n");
-		return PTR_ERR(chip->pmic);
-	}
+	if (IS_ERR(chip->pmic))
+		return dev_err_probe(dev, PTR_ERR(chip->pmic),
+				     "Unable to get reference to PMIC device\n");
 
 	switch (chip->pmic->subtype) {
 	case PMI8998_SUBTYPE:

-- 
2.51.0