From: Ankur Arora <ankur.a.arora@oracle.com>
To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
bpf@vger.kernel.org
Cc: arnd@arndb.de, catalin.marinas@arm.com, will@kernel.org,
peterz@infradead.org, akpm@linux-foundation.org,
mark.rutland@arm.com, harisokn@amazon.com, cl@gentwo.org,
ast@kernel.org, rafael@kernel.org, daniel.lezcano@linaro.org,
memxor@gmail.com, zhenglifeng1@huawei.com,
xueshuai@linux.alibaba.com, rdunlap@infradead.org,
david.laight.linux@gmail.com, joao.m.martins@oracle.com,
boris.ostrovsky@oracle.com, konrad.wilk@oracle.com,
ashok.bhat@arm.com, Ankur Arora <ankur.a.arora@oracle.com>
Subject: [PATCH v11 10/14] bpf/rqspinlock: Use smp_cond_load_acquire_timeout()
Date: Wed, 8 Apr 2026 17:55:34 +0530 [thread overview]
Message-ID: <20260408122538.3610871-11-ankur.a.arora@oracle.com> (raw)
In-Reply-To: <20260408122538.3610871-1-ankur.a.arora@oracle.com>
Switch out the conditional load interfaces used by rqspinlock
to smp_cond_read_acquire_timeout() and its wrapper,
atomic_cond_read_acquire_timeout().
Both these handle the timeout and amortize as needed, so use the
non-amortized RES_CHECK_TIMEOUT.
RES_CHECK_TIMEOUT does double duty here -- presenting the current
clock value, the timeout/deadlock error from clock_deadlock() to
the cond-load and, returning the error value via ret.
For correctness, we need to ensure that the error case of the
cond-load interface always agrees with that in clock_deadlock().
For the most part, this is fine because there's no independent clock,
or double reads from the clock in cond-load -- either of which could
lead to its internal state going out of sync from that of
clock_deadlock().
There is, however, an edge case where clock_deadlock() checks for:
if (time > ts->timeout_end)
return -ETIMEDOUT;
while smp_cond_load_acquire_timeout() checks for:
__time_now = (time_expr_ns);
if (__time_now <= 0 || __time_now >= __time_end) {
VAL = READ_ONCE(*__PTR);
break;
}
This runs into a problem when (__time_now == __time_end) since
clock_deadlock() does not treat it as a timeout condition but
the second clause in the conditional above does.
So, add an equality check in clock_deadlock().
Finally, redefine SMP_TIMEOUT_POLL_COUNT to be 16k to be similar to
the spin-count used in the amortized version. We only do this for
non-arm64 as that uses a waiting implementation.
Cc: bpf@vger.kernel.org
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
---
kernel/bpf/rqspinlock.c | 40 +++++++++++++++++++++++-----------------
1 file changed, 23 insertions(+), 17 deletions(-)
diff --git a/kernel/bpf/rqspinlock.c b/kernel/bpf/rqspinlock.c
index 0ec17ebb67c1..e5e27266b813 100644
--- a/kernel/bpf/rqspinlock.c
+++ b/kernel/bpf/rqspinlock.c
@@ -215,7 +215,7 @@ static noinline s64 clock_deadlock(rqspinlock_t *lock, u32 mask,
}
time = ktime_get_mono_fast_ns();
- if (time > ts->timeout_end)
+ if (time >= ts->timeout_end)
return -ETIMEDOUT;
/*
@@ -235,11 +235,10 @@ static noinline s64 clock_deadlock(rqspinlock_t *lock, u32 mask,
}
/*
- * Do not amortize with spins when res_smp_cond_load_acquire is defined,
- * as the macro does internal amortization for us.
+ * Spin amortized version of RES_CHECK_TIMEOUT. Used when busy-waiting in
+ * atomic_try_cmpxchg().
*/
-#ifndef res_smp_cond_load_acquire
-#define RES_CHECK_TIMEOUT(ts, ret, mask) \
+#define RES_CHECK_TIMEOUT_AMORTIZED(ts, ret, mask) \
({ \
s64 __timeval_err = 0; \
if (!(ts).spin++) \
@@ -247,7 +246,7 @@ static noinline s64 clock_deadlock(rqspinlock_t *lock, u32 mask,
(ret) = __timeval_err < 0 ? __timeval_err : 0; \
__timeval_err; \
})
-#else
+
#define RES_CHECK_TIMEOUT(ts, ret, mask) \
({ \
s64 __timeval_err; \
@@ -255,7 +254,6 @@ static noinline s64 clock_deadlock(rqspinlock_t *lock, u32 mask,
(ret) = __timeval_err < 0 ? __timeval_err : 0; \
__timeval_err; \
})
-#endif
/*
* Initialize the 'spin' member.
@@ -269,6 +267,17 @@ static noinline s64 clock_deadlock(rqspinlock_t *lock, u32 mask,
*/
#define RES_RESET_TIMEOUT(ts, _duration) ({ (ts).timeout_end = 0; (ts).duration = _duration; })
+/*
+ * Limit how often we invoke clock_deadlock() while spin-waiting in
+ * smp_cond_load_acquire_timeout() or atomic_cond_read_acquire_timeout().
+ *
+ * We only override the default value not superceding ARM64's override.
+ */
+#ifndef CONFIG_ARM64
+#undef SMP_TIMEOUT_POLL_COUNT
+#define SMP_TIMEOUT_POLL_COUNT (16*1024)
+#endif
+
/*
* Provide a test-and-set fallback for cases when queued spin lock support is
* absent from the architecture.
@@ -296,7 +305,7 @@ int __lockfunc resilient_tas_spin_lock(rqspinlock_t *lock)
val = atomic_read(&lock->val);
if (val || !atomic_try_cmpxchg(&lock->val, &val, 1)) {
- if (RES_CHECK_TIMEOUT(ts, ret, ~0u) < 0)
+ if (RES_CHECK_TIMEOUT_AMORTIZED(ts, ret, ~0u) < 0)
goto out;
cpu_relax();
goto retry;
@@ -319,12 +328,6 @@ EXPORT_SYMBOL_GPL(resilient_tas_spin_lock);
*/
static DEFINE_PER_CPU_ALIGNED(struct qnode, rqnodes[_Q_MAX_NODES]);
-#ifndef res_smp_cond_load_acquire
-#define res_smp_cond_load_acquire(v, c) smp_cond_load_acquire(v, c)
-#endif
-
-#define res_atomic_cond_read_acquire(v, c) res_smp_cond_load_acquire(&(v)->counter, (c))
-
/**
* resilient_queued_spin_lock_slowpath - acquire the queued spinlock
* @lock: Pointer to queued spinlock structure
@@ -421,7 +424,9 @@ int __lockfunc resilient_queued_spin_lock_slowpath(rqspinlock_t *lock, u32 val)
*/
if (val & _Q_LOCKED_MASK) {
RES_RESET_TIMEOUT(ts, RES_DEF_TIMEOUT);
- res_smp_cond_load_acquire(&lock->locked, !VAL || RES_CHECK_TIMEOUT(ts, ret, _Q_LOCKED_MASK) < 0);
+ smp_cond_load_acquire_timeout(&lock->locked, !VAL,
+ RES_CHECK_TIMEOUT(ts, ret, _Q_LOCKED_MASK),
+ ts.duration);
}
if (ret) {
@@ -582,8 +587,9 @@ int __lockfunc resilient_queued_spin_lock_slowpath(rqspinlock_t *lock, u32 val)
* us.
*/
RES_RESET_TIMEOUT(ts, RES_DEF_TIMEOUT * 2);
- val = res_atomic_cond_read_acquire(&lock->val, !(VAL & _Q_LOCKED_PENDING_MASK) ||
- RES_CHECK_TIMEOUT(ts, ret, _Q_LOCKED_PENDING_MASK) < 0);
+ val = atomic_cond_read_acquire_timeout(&lock->val, !(VAL & _Q_LOCKED_PENDING_MASK),
+ RES_CHECK_TIMEOUT(ts, ret, _Q_LOCKED_PENDING_MASK),
+ ts.duration);
/* Disable queue destruction when we detect deadlocks. */
if (ret == -EDEADLK) {
--
2.31.1
next prev parent reply other threads:[~2026-04-08 12:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-08 12:25 [PATCH v11 00/14] barrier: Add smp_cond_load_{relaxed,acquire}_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 01/14] asm-generic: barrier: Add smp_cond_load_relaxed_timeout() Ankur Arora
2026-05-06 7:30 ` Ankur Arora
2026-05-06 8:58 ` David Laight
2026-04-08 12:25 ` [PATCH v11 02/14] arm64: barrier: Support smp_cond_load_relaxed_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 03/14] arm64/delay: move some constants out to a separate header Ankur Arora
2026-04-08 12:25 ` [PATCH v11 04/14] arm64: support WFET in smp_cond_load_relaxed_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 05/14] arm64: rqspinlock: Remove private copy of smp_cond_load_acquire_timewait() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 06/14] asm-generic: barrier: Add smp_cond_load_acquire_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 07/14] atomic: Add atomic_cond_read_*_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 08/14] locking/atomic: scripts: build atomic_long_cond_read_*_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 09/14] bpf/rqspinlock: switch check_timeout() to a clock interface Ankur Arora
2026-04-08 12:25 ` Ankur Arora [this message]
2026-04-08 12:25 ` [PATCH v11 11/14] sched: add need-resched timed wait interface Ankur Arora
2026-04-08 12:25 ` [PATCH v11 12/14] cpuidle/poll_state: Wait for need-resched via tif_need_resched_relaxed_wait() Ankur Arora
2026-04-20 16:57 ` Okanovic, Haris
2026-04-20 17:50 ` Ankur Arora
2026-04-21 7:15 ` Catalin Marinas
2026-04-20 22:12 ` Christoph Lameter (Ampere)
2026-04-08 12:25 ` [PATCH v11 13/14] kunit: enable testing smp_cond_load_relaxed_timeout() Ankur Arora
2026-04-08 12:25 ` [PATCH v11 14/14] kunit: add tests for smp_cond_load_relaxed_timeout() Ankur Arora
2026-04-23 17:16 ` [PATCH v11 00/14] barrier: Add smp_cond_load_{relaxed,acquire}_timeout() Andrew Morton
2026-04-23 19:29 ` Ankur Arora
2026-04-24 14:16 ` [PATCH v11 00/14] barrier: Add smp_cond_load_{relaxed, acquire}_timeout() Okanovic, Haris
2026-04-24 14:10 ` Okanovic, Haris
2026-04-24 14:28 ` [PATCH v11 00/14] barrier: Add smp_cond_load_{relaxed,acquire}_timeout() Andrew Morton
2026-04-24 18:10 ` Ankur Arora
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260408122538.3610871-11-ankur.a.arora@oracle.com \
--to=ankur.a.arora@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=ashok.bhat@arm.com \
--cc=ast@kernel.org \
--cc=boris.ostrovsky@oracle.com \
--cc=bpf@vger.kernel.org \
--cc=catalin.marinas@arm.com \
--cc=cl@gentwo.org \
--cc=daniel.lezcano@linaro.org \
--cc=david.laight.linux@gmail.com \
--cc=harisokn@amazon.com \
--cc=joao.m.martins@oracle.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=memxor@gmail.com \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=rdunlap@infradead.org \
--cc=will@kernel.org \
--cc=xueshuai@linux.alibaba.com \
--cc=zhenglifeng1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox