From: Marc Zyngier <maz@kernel.org>
To: kvmarm@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: Joey Gouly <joey.gouly@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Oliver Upton <oupton@kernel.org>,
Zenghui Yu <yuzenghui@huawei.com>,
Sascha Bischoff <sascha.bischoff@arm.com>
Subject: [PATCH 06/18] KVM: arm64: vgic: Consolidate vgic_allocate_private_irqs_locked()
Date: Wed, 15 Apr 2026 12:55:47 +0100 [thread overview]
Message-ID: <20260415115559.2227718-7-maz@kernel.org> (raw)
In-Reply-To: <20260415115559.2227718-1-maz@kernel.org>
vgic_allocate_private_irqs_locked() calls two helpers, oddly named
vgic_{,v5_}allocate_private_irq().
Not only these helpers don't allocate anything, but they also
contain duplicate init code that would be better placed in the
caller.
Consolidate the common init code in the caller, rename the helpers
to vgic_{,v5_}setup_private_irq(), and pass the irq pointer around
instead of the index of the interrupt.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
arch/arm64/kvm/vgic/vgic-init.c | 45 +++++++++++++--------------------
1 file changed, 18 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c
index 933983bb20052..907057881b26a 100644
--- a/arch/arm64/kvm/vgic/vgic-init.c
+++ b/arch/arm64/kvm/vgic/vgic-init.c
@@ -271,18 +271,12 @@ int kvm_vgic_vcpu_nv_init(struct kvm_vcpu *vcpu)
return ret;
}
-static void vgic_allocate_private_irq(struct kvm_vcpu *vcpu, int i, u32 type)
+static void vgic_setup_private_irq(struct kvm_vcpu *vcpu, struct vgic_irq *irq,
+ u32 type)
{
- struct vgic_irq *irq = &vcpu->arch.vgic_cpu.private_irqs[i];
+ irq->intid = irq - &vcpu->arch.vgic_cpu.private_irqs[0];
- INIT_LIST_HEAD(&irq->ap_list);
- raw_spin_lock_init(&irq->irq_lock);
- irq->vcpu = NULL;
- irq->target_vcpu = vcpu;
- refcount_set(&irq->refcount, 0);
-
- irq->intid = i;
- if (vgic_irq_is_sgi(i)) {
+ if (vgic_irq_is_sgi(irq->intid)) {
/* SGIs */
irq->enabled = 1;
irq->config = VGIC_CONFIG_EDGE;
@@ -303,18 +297,11 @@ static void vgic_allocate_private_irq(struct kvm_vcpu *vcpu, int i, u32 type)
}
}
-static void vgic_v5_allocate_private_irq(struct kvm_vcpu *vcpu, int i, u32 type)
+static void vgic_v5_setup_private_irq(struct kvm_vcpu *vcpu, struct vgic_irq *irq)
{
- struct vgic_irq *irq = &vcpu->arch.vgic_cpu.private_irqs[i];
- u32 intid = vgic_v5_make_ppi(i);
-
- INIT_LIST_HEAD(&irq->ap_list);
- raw_spin_lock_init(&irq->irq_lock);
- irq->vcpu = NULL;
- irq->target_vcpu = vcpu;
- refcount_set(&irq->refcount, 0);
+ int i = irq - &vcpu->arch.vgic_cpu.private_irqs[0];
- irq->intid = intid;
+ irq->intid = vgic_v5_make_ppi(i);
/* The only Edge architected PPI is the SW_PPI */
if (i == GICV5_ARCH_PPI_SW_PPI)
@@ -323,7 +310,7 @@ static void vgic_v5_allocate_private_irq(struct kvm_vcpu *vcpu, int i, u32 type)
irq->config = VGIC_CONFIG_LEVEL;
/* Register the GICv5-specific PPI ops */
- vgic_v5_set_ppi_ops(vcpu, intid);
+ vgic_v5_set_ppi_ops(vcpu, irq->intid);
}
static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu, u32 type)
@@ -349,15 +336,19 @@ static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu, u32 type)
if (!vgic_cpu->private_irqs)
return -ENOMEM;
- /*
- * Enable and configure all SGIs to be edge-triggered and
- * configure all PPIs as level-triggered.
- */
for (i = 0; i < num_private_irqs; i++) {
+ struct vgic_irq *irq = &vcpu->arch.vgic_cpu.private_irqs[i];
+
+ INIT_LIST_HEAD(&irq->ap_list);
+ raw_spin_lock_init(&irq->irq_lock);
+ irq->vcpu = NULL;
+ irq->target_vcpu = vcpu;
+ refcount_set(&irq->refcount, 0);
+
if (vgic_is_v5(vcpu->kvm))
- vgic_v5_allocate_private_irq(vcpu, i, type);
+ vgic_v5_setup_private_irq(vcpu, irq);
else
- vgic_allocate_private_irq(vcpu, i, type);
+ vgic_setup_private_irq(vcpu, irq, type);
}
return 0;
--
2.47.3
next prev parent reply other threads:[~2026-04-15 11:56 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-15 11:55 [PATCH 00/18] KVM: arm64: Second batch of vgic fixes for 7.1 Marc Zyngier
2026-04-15 11:55 ` [PATCH 01/18] KVM: arm64: vgic-v5: Add for_each_visible_v5_ppi() iterator Marc Zyngier
2026-04-15 11:55 ` [PATCH 02/18] KVM: arm64: vgic-v5: Move PPI caps into kvm_vgic_global_state Marc Zyngier
2026-04-15 11:55 ` [PATCH 03/18] KVM: arm64: vgic-v5: Remove use of __assign_bit() with a constant Marc Zyngier
2026-04-15 11:55 ` [PATCH 04/18] KVM: arm64: vgic-v5: Drop pointless ARM64_HAS_GICV5_CPUIF check Marc Zyngier
2026-04-15 11:55 ` [PATCH 05/18] KVM: arm64: vgic: Constify struct irq_ops usage Marc Zyngier
2026-04-15 11:55 ` Marc Zyngier [this message]
2026-04-15 11:55 ` [PATCH 07/18] KVM: arm64: vgic-v5: Drop defensive checks from vgic_v5_ppi_queue_irq_unlock() Marc Zyngier
2026-04-15 11:55 ` [PATCH 08/18] KVM: arm64: vgic: Rationalise per-CPU irq accessor Marc Zyngier
2026-04-17 15:21 ` Joey Gouly
2026-04-15 11:55 ` [PATCH 09/18] KVM: arm64: vgic-v5: Limit support to 64 PPIs Marc Zyngier
2026-04-17 16:10 ` Joey Gouly
2026-04-15 11:55 ` [PATCH 10/18] KVM: arm64: vgic-v5: Add missing trap handing for NV triage Marc Zyngier
2026-04-15 11:55 ` [PATCH 11/18] KVM: arm64: vgic-v5: Atomically assign bits to PPI DVI bitmap Marc Zyngier
2026-04-15 11:55 ` [PATCH 12/18] KVM: arm64: selftests: Add missing GIC CDEN to no-vgic-v5 selftest Marc Zyngier
2026-04-15 11:55 ` [PATCH 13/18] KVM: arm64: selftests: Cleanup unused vars in GICv5 PPI selftest Marc Zyngier
2026-04-15 11:55 ` [PATCH 14/18] KVM: arm64: selftests: Improve error handling for " Marc Zyngier
2026-04-15 11:55 ` [PATCH 15/18] Documentation: KVM: Fix typos in VGICv5 documentation Marc Zyngier
2026-04-17 15:29 ` Joey Gouly
2026-04-15 11:55 ` [PATCH 16/18] Documentation: KVM: Clarify that PMU_V3_IRQ IntID requirements for GICv5 Marc Zyngier
2026-04-15 11:55 ` [PATCH 17/18] irqchip/gic-v5: Immediately exec priority drop following activate Marc Zyngier
2026-04-15 11:55 ` [PATCH 18/18] KVM: arm64: Fix arch timer interrupts for GICv3-on-GICv5 guests Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260415115559.2227718-7-maz@kernel.org \
--to=maz@kernel.org \
--cc=joey.gouly@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=oupton@kernel.org \
--cc=sascha.bischoff@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox