[PATCH 2/4] arm64: dts: imx95: switch usb3 controller to flattened model

[Xu Yang <xu.yang_2@nxp.com>]

Switch to use flattened model for USB3 controller. To enable USB
controller with restricted DMA access range to work correctly, add a
pseudo simple-bus to constrain the dma address.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 48 ++++++++++++------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 71394871d8dd..91048501a692 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1772,45 +1772,45 @@ smmu: iommu@490d0000 {
 			};
 		};
 
-		usb3: usb@4c010010 {
-			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
-			reg = <0x0 0x4c010010 0x0 0x04>,
-			      <0x0 0x4c1f0000 0x0 0x20>;
-			clocks = <&scmi_clk IMX95_CLK_HSIO>,
-				 <&scmi_clk IMX95_CLK_32K>;
-			clock-names = "hsio", "suspend";
-			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		hsio_blk_ctl: syscon@4c0100c0 {
+			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
+			reg = <0x0 0x4c0100c0 0x0 0x1>;
+			#clock-cells = <1>;
+			clocks = <&clk_sys100m>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+		};
+
+		bus@4c100000 {
+			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
-			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
-			status = "disabled";
+			ranges;
 
-			usb3_dwc3: usb@4c100000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x4c100000 0x0 0x10000>;
+			usb3: usb3_dwc3: usb@4c100000 {
+				compatible = "nxp,imx8mp-dwc3";
+				reg = <0x0 0x4c100000 0x0 0x10000>,
+				      <0x0 0x4c010010 0x0 0x04>,
+				      <0x0 0x4c1f0000 0x0 0x20>;
+				reg-names = "core", "blkctl", "glue";
 				clocks = <&scmi_clk IMX95_CLK_HSIO>,
+					 <&scmi_clk IMX95_CLK_HSIO>,
 					 <&scmi_clk IMX95_CLK_24M>,
 					 <&scmi_clk IMX95_CLK_32K>;
-				clock-names = "bus_early", "ref", "suspend";
-				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "hsio", "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "dwc_usb3", "wakeup";
+				power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 				phys = <&usb3_phy>, <&usb3_phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,gfladj-refclk-lpm-sel-quirk;
 				snps,parkmode-disable-ss-quirk;
 				iommus = <&smmu 0xe>;
+				status = "disabled";
 			};
 		};
 
-		hsio_blk_ctl: syscon@4c0100c0 {
-			compatible = "nxp,imx95-hsio-blk-ctl", "syscon";
-			reg = <0x0 0x4c0100c0 0x0 0x1>;
-			#clock-cells = <1>;
-			clocks = <&clk_sys100m>;
-			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
-		};
-
 		usb3_phy: phy@4c1f0040 {
 			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
 			reg = <0x0 0x4c1f0040 0x0 0x40>,
-- 
2.34.1