From: Xu Yang <xu.yang_2@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
Frank.Li@nxp.com, s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, jun.li@nxp.com
Subject: [PATCH v2 1/6] arm64: dts: imx8mp: reorder usb related nodes
Date: Mon, 27 Apr 2026 16:27:23 +0800 [thread overview]
Message-ID: <20260427082728.3641872-1-xu.yang_2@nxp.com> (raw)
Reorder USB related nodes to improve nodes organization.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
Changes in v2:
- new patch
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 170 +++++++++++-----------
1 file changed, 85 insertions(+), 85 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 90d7bb8f5619..cc0246a9c003 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -2229,6 +2229,67 @@ hdmi_tx_phy: phy@32fdff00 {
};
};
+ usb3_0: usb@32f10100 {
+ compatible = "fsl,imx8mp-dwc3";
+ reg = <0x32f10100 0x8>,
+ <0x381f0000 0x20>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_USB_SUSP>;
+ clock-names = "hsio", "suspend";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+ ranges;
+ status = "disabled";
+
+ usb_dwc3_0: usb@38100000 {
+ compatible = "snps,dwc3";
+ reg = <0x38100000 0x10000>;
+ clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+ <&clk IMX8MP_CLK_USB_CORE_REF>,
+ <&clk IMX8MP_CLK_USB_SUSP>;
+ clock-names = "bus_early", "ref", "suspend";
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy0>, <&usb3_phy0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,gfladj-refclk-lpm-sel-quirk;
+ snps,parkmode-disable-ss-quirk;
+ };
+
+ };
+
+ usb3_1: usb@32f10108 {
+ compatible = "fsl,imx8mp-dwc3";
+ reg = <0x32f10108 0x8>,
+ <0x382f0000 0x20>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_USB_SUSP>;
+ clock-names = "hsio", "suspend";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+ ranges;
+ status = "disabled";
+
+ usb_dwc3_1: usb@38200000 {
+ compatible = "snps,dwc3";
+ reg = <0x38200000 0x10000>;
+ clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+ <&clk IMX8MP_CLK_USB_CORE_REF>,
+ <&clk IMX8MP_CLK_USB_SUSP>;
+ clock-names = "bus_early", "ref", "suspend";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy1>, <&usb3_phy1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,gfladj-refclk-lpm-sel-quirk;
+ snps,parkmode-disable-ss-quirk;
+ };
+ };
+
pcie0: pcie: pcie@33800000 {
compatible = "fsl,imx8mp-pcie";
reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
@@ -2329,6 +2390,30 @@ gpu2d: gpu@38008000 {
power-domains = <&pgc_gpu2d>;
};
+ usb3_phy0: usb-phy@381f0040 {
+ compatible = "fsl,imx8mp-usb-phy";
+ reg = <0x381f0040 0x40>;
+ clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+ clock-names = "phy";
+ assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb3_phy1: usb-phy@382f0040 {
+ compatible = "fsl,imx8mp-usb-phy";
+ reg = <0x382f0040 0x40>;
+ clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
+ clock-names = "phy";
+ assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
vpu_g1: video-codec@38300000 {
compatible = "nxp,imx8mm-vpu-g1";
reg = <0x38300000 0x10000>;
@@ -2407,91 +2492,6 @@ ddr-pmu@3d800000 {
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
- usb3_phy0: usb-phy@381f0040 {
- compatible = "fsl,imx8mp-usb-phy";
- reg = <0x381f0040 0x40>;
- clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
- clock-names = "phy";
- assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
- power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- usb3_0: usb@32f10100 {
- compatible = "fsl,imx8mp-dwc3";
- reg = <0x32f10100 0x8>,
- <0x381f0000 0x20>;
- clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
- <&clk IMX8MP_CLK_USB_SUSP>;
- clock-names = "hsio", "suspend";
- interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
- #address-cells = <1>;
- #size-cells = <1>;
- dma-ranges = <0x40000000 0x40000000 0xc0000000>;
- ranges;
- status = "disabled";
-
- usb_dwc3_0: usb@38100000 {
- compatible = "snps,dwc3";
- reg = <0x38100000 0x10000>;
- clocks = <&clk IMX8MP_CLK_USB_ROOT>,
- <&clk IMX8MP_CLK_USB_CORE_REF>,
- <&clk IMX8MP_CLK_USB_SUSP>;
- clock-names = "bus_early", "ref", "suspend";
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb3_phy0>, <&usb3_phy0>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,gfladj-refclk-lpm-sel-quirk;
- snps,parkmode-disable-ss-quirk;
- };
-
- };
-
- usb3_phy1: usb-phy@382f0040 {
- compatible = "fsl,imx8mp-usb-phy";
- reg = <0x382f0040 0x40>;
- clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>;
- clock-names = "phy";
- assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
- power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- usb3_1: usb@32f10108 {
- compatible = "fsl,imx8mp-dwc3";
- reg = <0x32f10108 0x8>,
- <0x382f0000 0x20>;
- clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
- <&clk IMX8MP_CLK_USB_SUSP>;
- clock-names = "hsio", "suspend";
- interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
- #address-cells = <1>;
- #size-cells = <1>;
- dma-ranges = <0x40000000 0x40000000 0xc0000000>;
- ranges;
- status = "disabled";
-
- usb_dwc3_1: usb@38200000 {
- compatible = "snps,dwc3";
- reg = <0x38200000 0x10000>;
- clocks = <&clk IMX8MP_CLK_USB_ROOT>,
- <&clk IMX8MP_CLK_USB_CORE_REF>,
- <&clk IMX8MP_CLK_USB_SUSP>;
- clock-names = "bus_early", "ref", "suspend";
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb3_phy1>, <&usb3_phy1>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,gfladj-refclk-lpm-sel-quirk;
- snps,parkmode-disable-ss-quirk;
- };
- };
-
dsp: dsp@3b6e8000 {
compatible = "fsl,imx8mp-hifi4";
reg = <0x3b6e8000 0x88000>;
--
2.34.1
next reply other threads:[~2026-04-27 8:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-27 8:27 Xu Yang [this message]
2026-04-27 8:27 ` [PATCH v2 2/6] arm64: dts: imx8mp: switch usb controller to flattened model Xu Yang
2026-04-27 8:27 ` [PATCH v2 3/6] arm64: dts: imx8mp-evk: add typec node Xu Yang
2026-04-27 8:27 ` [PATCH v2 4/6] arm64: dts: imx8mp-evk: add usb3_phy1 tuning properties Xu Yang
2026-04-27 8:27 ` [PATCH v2 5/6] arm64: dts: imx95: switch usb3 controller to flattened model Xu Yang
2026-04-27 8:27 ` [PATCH v2 6/6] arm64: dts: imx8mq-evk: add typec node Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260427082728.3641872-1-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox