From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Frank Wang <frank.wang@rock-chips.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Andy Yan <andy.yan@rock-chips.com>,
Dmitry Baryshkov <lumag@kernel.org>,
Yubing Zhang <yubing.zhang@rock-chips.com>,
Alexey Charkov <alchark@gmail.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@collabora.com,
devicetree@vger.kernel.org,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCH v4 15/16] phy: rockchip: usbdp: Factor out lane_mux_sel setup
Date: Tue, 28 Apr 2026 18:13:54 +0200 [thread overview]
Message-ID: <20260428-rockchip-usbdp-cleanup-v4-15-7775671ece22@collabora.com> (raw)
In-Reply-To: <20260428-rockchip-usbdp-cleanup-v4-0-7775671ece22@collabora.com>
Avoid describing the USB+DP lane_mux_sel logic twice by introducing
a helper function to reduce code duplication.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/phy/rockchip/phy-rockchip-usbdp.c | 81 +++++++++++++++----------------
1 file changed, 40 insertions(+), 41 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 80fe5993c6c7..17637d92cf9b 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -586,6 +586,42 @@ static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
udphy->mode = mode;
}
+static void rk_udphy_set_typec_state(struct rk_udphy *udphy, unsigned long state)
+{
+ u8 mode;
+
+ switch (state) {
+ case TYPEC_DP_STATE_C:
+ case TYPEC_DP_STATE_E:
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ mode = UDPHY_MODE_DP;
+ udphy->dp_lanes = 4;
+ break;
+
+ case TYPEC_DP_STATE_D:
+ default:
+ if (udphy->flip) {
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+ } else {
+ udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+ udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+ udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+ }
+ mode = UDPHY_MODE_DP_USB;
+ udphy->dp_lanes = 2;
+ break;
+ }
+
+ rk_udphy_mode_set(udphy, mode);
+}
+
static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
{
if (udphy->flip) {
@@ -593,10 +629,6 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
udphy->dp_lane_sel[1] = 1;
udphy->dp_lane_sel[2] = 3;
udphy->dp_lane_sel[3] = 2;
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_INVERT;
udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_INVERT;
gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 1);
@@ -606,18 +638,14 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
udphy->dp_lane_sel[1] = 3;
udphy->dp_lane_sel[2] = 1;
udphy->dp_lane_sel[3] = 0;
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_NORMAL;
udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_NORMAL;
gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
}
- rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
- udphy->dp_lanes = 2;
+ /* default to USB3 + DP as 4 lane USB is not supported */
+ rk_udphy_set_typec_state(udphy, TYPEC_DP_STATE_D);
}
static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -1316,42 +1344,13 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
struct typec_mux_state *state)
{
struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
- u8 mode;
mutex_lock(&udphy->mutex);
- switch (state->mode) {
- case TYPEC_DP_STATE_C:
- case TYPEC_DP_STATE_E:
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
- mode = UDPHY_MODE_DP;
- udphy->dp_lanes = 4;
- break;
-
- case TYPEC_DP_STATE_D:
- default:
- if (udphy->flip) {
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
- } else {
- udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
- udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
- udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
- }
- mode = UDPHY_MODE_DP_USB;
- udphy->dp_lanes = 2;
- break;
- }
-
- rk_udphy_mode_set(udphy, mode);
+ rk_udphy_set_typec_state(udphy, state->mode);
mutex_unlock(&udphy->mutex);
+
return 0;
}
--
2.53.0
next prev parent reply other threads:[~2026-04-28 16:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 16:13 [PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 01/16] dt-bindings: phy: rockchip-usbdp: add improved ports scheme Sebastian Reichel
2026-05-05 15:44 ` Rob Herring
2026-05-05 15:45 ` Rob Herring (Arm)
2026-04-28 16:13 ` [PATCH v4 02/16] phy: rockchip: usbdp: Do not loose USB3 PHY status Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 03/16] phy: rockchip: usbdp: Keep clocks running on PHY re-init Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 04/16] phy: rockchip: usbdp: Amend SSC modulation deviation Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 05/16] phy: rockchip: usbdp: Fix LFPS detect threshold control Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 06/16] phy: rockchip: usbdp: Add missing mode_change update Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 07/16] phy: rockchip: usbdp: Support single-lane DP Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 08/16] phy: rockchip: usbdp: Rename DP lane functions Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 09/16] phy: rockchip: usbdp: Use FIELD_PREP_WM16_CONST Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 10/16] phy: rockchip: usbdp: Cleanup DP lane selection function Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 11/16] phy: rockchip: usbdp: Register DP aux bridge Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 12/16] phy: rockchip: usbdp: Drop DP HPD handling Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 13/16] phy: rockchip: usbdp: Rename mode_change to phy_needs_reinit Sebastian Reichel
2026-04-28 16:13 ` [PATCH v4 14/16] phy: rockchip: usbdp: Re-init the PHY on orientation change Sebastian Reichel
2026-04-28 16:13 ` Sebastian Reichel [this message]
2026-04-28 16:13 ` [PATCH v4 16/16] phy: rockchip: usbdp: Use guard functions for mutex Sebastian Reichel
2026-05-03 16:50 ` [PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups Vinod Koul
2026-05-03 19:12 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428-rockchip-usbdp-cleanup-v4-15-7775671ece22@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=alchark@gmail.com \
--cc=andy.yan@rock-chips.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank.wang@rock-chips.com \
--cc=heiko@sntech.de \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lumag@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
--cc=yubing.zhang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox