From: Sai Sree Kartheek Adivi <s-adivi@ti.com>
To: <peter.ujfalusi@gmail.com>, <vkoul@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <nm@ti.com>,
<ssantosh@kernel.org>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <vigneshr@ti.com>,
<Frank.li@nxp.com>, <s-adivi@ti.com>
Cc: <r-sharma3@ti.com>, <gehariprasath@ti.com>
Subject: [PATCH v6 10/19] dmaengine: ti: k3-udma: refactor resource setup functions
Date: Tue, 28 Apr 2026 14:21:39 +0530 [thread overview]
Message-ID: <20260428085202.1724548-11-s-adivi@ti.com> (raw)
In-Reply-To: <20260428085202.1724548-1-s-adivi@ti.com>
The implementation of setup_resources, bcdma_setup_resources and
pktdma_setup_resources is largely shared between all K3 UDMA variants
with the only major difference being SCI resources setup. So,
- Move the functions to k3-udma-common.c.
- Split SCI resource setup for bcdma and pktdma into separate functions
in variant specific driver (k3-udma.c).
- Add function pointers for setup_sci_resources in udma_dev and call
them as part of the actual resource setup implementations in
k3-udma-common.c to retain the existing functionality.
- Also since setup_resources call udma_setup_resources which is not
required for all K3 UDMA variants, Add a function pointer in udma_dev
and use that to call udma_setup_resources.
This refactor improves code reuse and maintainability across multiple
variants.
No functional changes intended.
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
---
drivers/dma/ti/k3-udma-common.c | 204 ++++++++++++++++++++++++++++++++
drivers/dma/ti/k3-udma.c | 182 +---------------------------
drivers/dma/ti/k3-udma.h | 8 ++
3 files changed, 218 insertions(+), 176 deletions(-)
diff --git a/drivers/dma/ti/k3-udma-common.c b/drivers/dma/ti/k3-udma-common.c
index 882d27b3c9ee5..b419b23c401a1 100644
--- a/drivers/dma/ti/k3-udma-common.c
+++ b/drivers/dma/ti/k3-udma-common.c
@@ -8,7 +8,9 @@
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/soc/ti/ti_sci_inta_msi.h>
#include <linux/soc/ti/k3-ringacc.h>
#include "k3-udma.h"
@@ -2333,5 +2335,207 @@ void bcdma_free_bchan_resources(struct udma_chan *uc)
}
EXPORT_SYMBOL_GPL(bcdma_free_bchan_resources);
+int bcdma_setup_resources(struct udma_dev *ud)
+{
+ int ret;
+ struct device *dev = ud->dev;
+ u32 cap;
+
+ /* Set up the throughput level start indexes */
+ cap = udma_read(ud->mmrs[MMR_GCFG], 0x2c);
+ if (BCDMA_CAP3_UBCHAN_CNT(cap)) {
+ ud->bchan_tpl.levels = 3;
+ ud->bchan_tpl.start_idx[1] = BCDMA_CAP3_UBCHAN_CNT(cap);
+ ud->bchan_tpl.start_idx[0] = BCDMA_CAP3_HBCHAN_CNT(cap);
+ } else if (BCDMA_CAP3_HBCHAN_CNT(cap)) {
+ ud->bchan_tpl.levels = 2;
+ ud->bchan_tpl.start_idx[0] = BCDMA_CAP3_HBCHAN_CNT(cap);
+ } else {
+ ud->bchan_tpl.levels = 1;
+ }
+
+ cap = udma_read(ud->mmrs[MMR_GCFG], 0x30);
+ if (BCDMA_CAP4_URCHAN_CNT(cap)) {
+ ud->rchan_tpl.levels = 3;
+ ud->rchan_tpl.start_idx[1] = BCDMA_CAP4_URCHAN_CNT(cap);
+ ud->rchan_tpl.start_idx[0] = BCDMA_CAP4_HRCHAN_CNT(cap);
+ } else if (BCDMA_CAP4_HRCHAN_CNT(cap)) {
+ ud->rchan_tpl.levels = 2;
+ ud->rchan_tpl.start_idx[0] = BCDMA_CAP4_HRCHAN_CNT(cap);
+ } else {
+ ud->rchan_tpl.levels = 1;
+ }
+
+ if (BCDMA_CAP4_UTCHAN_CNT(cap)) {
+ ud->tchan_tpl.levels = 3;
+ ud->tchan_tpl.start_idx[1] = BCDMA_CAP4_UTCHAN_CNT(cap);
+ ud->tchan_tpl.start_idx[0] = BCDMA_CAP4_HTCHAN_CNT(cap);
+ } else if (BCDMA_CAP4_HTCHAN_CNT(cap)) {
+ ud->tchan_tpl.levels = 2;
+ ud->tchan_tpl.start_idx[0] = BCDMA_CAP4_HTCHAN_CNT(cap);
+ } else {
+ ud->tchan_tpl.levels = 1;
+ }
+
+ ud->bchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->bchan_cnt),
+ sizeof(unsigned long), GFP_KERNEL);
+ ud->bchans = devm_kcalloc(dev, ud->bchan_cnt, sizeof(*ud->bchans),
+ GFP_KERNEL);
+ ud->tchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tchan_cnt),
+ sizeof(unsigned long), GFP_KERNEL);
+ ud->tchans = devm_kcalloc(dev, ud->tchan_cnt, sizeof(*ud->tchans),
+ GFP_KERNEL);
+ ud->rchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->rchan_cnt),
+ sizeof(unsigned long), GFP_KERNEL);
+ ud->rchans = devm_kcalloc(dev, ud->rchan_cnt, sizeof(*ud->rchans),
+ GFP_KERNEL);
+ /* BCDMA do not really have flows, but the driver expect it */
+ ud->rflow_in_use = devm_kcalloc(dev, BITS_TO_LONGS(ud->rchan_cnt),
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ ud->rflows = devm_kcalloc(dev, ud->rchan_cnt, sizeof(*ud->rflows),
+ GFP_KERNEL);
+
+ if (!ud->bchan_map || !ud->tchan_map || !ud->rchan_map ||
+ !ud->rflow_in_use || !ud->bchans || !ud->tchans || !ud->rchans ||
+ !ud->rflows)
+ return -ENOMEM;
+
+ if (ud->bcdma_setup_sci_resources) {
+ ret = ud->bcdma_setup_sci_resources(ud);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int pktdma_setup_resources(struct udma_dev *ud)
+{
+ int ret;
+ struct device *dev = ud->dev;
+ u32 cap3;
+
+ /* Set up the throughput level start indexes */
+ cap3 = udma_read(ud->mmrs[MMR_GCFG], 0x2c);
+ if (UDMA_CAP3_UCHAN_CNT(cap3)) {
+ ud->tchan_tpl.levels = 3;
+ ud->tchan_tpl.start_idx[1] = UDMA_CAP3_UCHAN_CNT(cap3);
+ ud->tchan_tpl.start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
+ } else if (UDMA_CAP3_HCHAN_CNT(cap3)) {
+ ud->tchan_tpl.levels = 2;
+ ud->tchan_tpl.start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
+ } else {
+ ud->tchan_tpl.levels = 1;
+ }
+
+ ud->rchan_tpl.levels = ud->tchan_tpl.levels;
+ ud->rchan_tpl.start_idx[0] = ud->tchan_tpl.start_idx[0];
+ ud->rchan_tpl.start_idx[1] = ud->tchan_tpl.start_idx[1];
+
+ ud->tchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tchan_cnt),
+ sizeof(unsigned long), GFP_KERNEL);
+ ud->tchans = devm_kcalloc(dev, ud->tchan_cnt, sizeof(*ud->tchans),
+ GFP_KERNEL);
+ ud->rchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->rchan_cnt),
+ sizeof(unsigned long), GFP_KERNEL);
+ ud->rchans = devm_kcalloc(dev, ud->rchan_cnt, sizeof(*ud->rchans),
+ GFP_KERNEL);
+ ud->rflow_in_use = devm_kcalloc(dev, BITS_TO_LONGS(ud->rflow_cnt),
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ ud->rflows = devm_kcalloc(dev, ud->rflow_cnt, sizeof(*ud->rflows),
+ GFP_KERNEL);
+ ud->tflow_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tflow_cnt),
+ sizeof(unsigned long), GFP_KERNEL);
+
+ if (!ud->tchan_map || !ud->rchan_map || !ud->tflow_map || !ud->tchans ||
+ !ud->rchans || !ud->rflows || !ud->rflow_in_use)
+ return -ENOMEM;
+
+ if (ud->pktdma_setup_sci_resources) {
+ ret = ud->pktdma_setup_sci_resources(ud);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int setup_resources(struct udma_dev *ud)
+{
+ struct device *dev = ud->dev;
+ int ch_count, ret;
+
+ switch (ud->match_data->type) {
+ case DMA_TYPE_UDMA:
+ ret = ud->udma_setup_resources(ud);
+ break;
+ case DMA_TYPE_BCDMA:
+ ret = bcdma_setup_resources(ud);
+ break;
+ case DMA_TYPE_PKTDMA:
+ ret = pktdma_setup_resources(ud);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (ret)
+ return ret;
+
+ ch_count = ud->bchan_cnt + ud->tchan_cnt + ud->rchan_cnt;
+ if (ud->bchan_cnt)
+ ch_count -= bitmap_weight(ud->bchan_map, ud->bchan_cnt);
+ ch_count -= bitmap_weight(ud->tchan_map, ud->tchan_cnt);
+ ch_count -= bitmap_weight(ud->rchan_map, ud->rchan_cnt);
+ if (!ch_count)
+ return -ENODEV;
+
+ ud->channels = devm_kcalloc(dev, ch_count, sizeof(*ud->channels),
+ GFP_KERNEL);
+ if (!ud->channels)
+ return -ENOMEM;
+
+ switch (ud->match_data->type) {
+ case DMA_TYPE_UDMA:
+ dev_info(dev,
+ "Channels: %d (tchan: %u, rchan: %u, gp-rflow: %u)\n",
+ ch_count,
+ ud->tchan_cnt - bitmap_weight(ud->tchan_map,
+ ud->tchan_cnt),
+ ud->rchan_cnt - bitmap_weight(ud->rchan_map,
+ ud->rchan_cnt),
+ ud->rflow_cnt - bitmap_weight(ud->rflow_gp_map,
+ ud->rflow_cnt));
+ break;
+ case DMA_TYPE_BCDMA:
+ dev_info(dev,
+ "Channels: %d (bchan: %u, tchan: %u, rchan: %u)\n",
+ ch_count,
+ ud->bchan_cnt - bitmap_weight(ud->bchan_map,
+ ud->bchan_cnt),
+ ud->tchan_cnt - bitmap_weight(ud->tchan_map,
+ ud->tchan_cnt),
+ ud->rchan_cnt - bitmap_weight(ud->rchan_map,
+ ud->rchan_cnt));
+ break;
+ case DMA_TYPE_PKTDMA:
+ dev_info(dev,
+ "Channels: %d (tchan: %u, rchan: %u)\n",
+ ch_count,
+ ud->tchan_cnt - bitmap_weight(ud->tchan_map,
+ ud->tchan_cnt),
+ ud->rchan_cnt - bitmap_weight(ud->rchan_map,
+ ud->rchan_cnt));
+ break;
+ default:
+ break;
+ }
+
+ return ch_count;
+}
+EXPORT_SYMBOL_GPL(setup_resources);
+
MODULE_DESCRIPTION("Texas Instruments K3 UDMA Common Library");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 753acf1e13fa2..d9d6cbda46b2c 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -2083,7 +2083,7 @@ static const char * const range_names[] = {
[RM_RANGE_TFLOW] = "ti,sci-rm-range-tflow",
};
-static int udma_setup_resources(struct udma_dev *ud)
+int udma_setup_resources(struct udma_dev *ud)
{
int ret, i, j;
struct device *dev = ud->dev;
@@ -2245,74 +2245,13 @@ static int udma_setup_resources(struct udma_dev *ud)
return 0;
}
-static int bcdma_setup_resources(struct udma_dev *ud)
+static int bcdma_setup_sci_resources(struct udma_dev *ud)
{
int ret, i, j;
struct device *dev = ud->dev;
struct ti_sci_resource *rm_res, irq_res;
struct udma_tisci_rm *tisci_rm = &ud->tisci_rm;
const struct udma_oes_offsets *oes = &ud->soc_data->oes;
- u32 cap;
-
- /* Set up the throughput level start indexes */
- cap = udma_read(ud->mmrs[MMR_GCFG], 0x2c);
- if (BCDMA_CAP3_UBCHAN_CNT(cap)) {
- ud->bchan_tpl.levels = 3;
- ud->bchan_tpl.start_idx[1] = BCDMA_CAP3_UBCHAN_CNT(cap);
- ud->bchan_tpl.start_idx[0] = BCDMA_CAP3_HBCHAN_CNT(cap);
- } else if (BCDMA_CAP3_HBCHAN_CNT(cap)) {
- ud->bchan_tpl.levels = 2;
- ud->bchan_tpl.start_idx[0] = BCDMA_CAP3_HBCHAN_CNT(cap);
- } else {
- ud->bchan_tpl.levels = 1;
- }
-
- cap = udma_read(ud->mmrs[MMR_GCFG], 0x30);
- if (BCDMA_CAP4_URCHAN_CNT(cap)) {
- ud->rchan_tpl.levels = 3;
- ud->rchan_tpl.start_idx[1] = BCDMA_CAP4_URCHAN_CNT(cap);
- ud->rchan_tpl.start_idx[0] = BCDMA_CAP4_HRCHAN_CNT(cap);
- } else if (BCDMA_CAP4_HRCHAN_CNT(cap)) {
- ud->rchan_tpl.levels = 2;
- ud->rchan_tpl.start_idx[0] = BCDMA_CAP4_HRCHAN_CNT(cap);
- } else {
- ud->rchan_tpl.levels = 1;
- }
-
- if (BCDMA_CAP4_UTCHAN_CNT(cap)) {
- ud->tchan_tpl.levels = 3;
- ud->tchan_tpl.start_idx[1] = BCDMA_CAP4_UTCHAN_CNT(cap);
- ud->tchan_tpl.start_idx[0] = BCDMA_CAP4_HTCHAN_CNT(cap);
- } else if (BCDMA_CAP4_HTCHAN_CNT(cap)) {
- ud->tchan_tpl.levels = 2;
- ud->tchan_tpl.start_idx[0] = BCDMA_CAP4_HTCHAN_CNT(cap);
- } else {
- ud->tchan_tpl.levels = 1;
- }
-
- ud->bchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->bchan_cnt),
- sizeof(unsigned long), GFP_KERNEL);
- ud->bchans = devm_kcalloc(dev, ud->bchan_cnt, sizeof(*ud->bchans),
- GFP_KERNEL);
- ud->tchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tchan_cnt),
- sizeof(unsigned long), GFP_KERNEL);
- ud->tchans = devm_kcalloc(dev, ud->tchan_cnt, sizeof(*ud->tchans),
- GFP_KERNEL);
- ud->rchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->rchan_cnt),
- sizeof(unsigned long), GFP_KERNEL);
- ud->rchans = devm_kcalloc(dev, ud->rchan_cnt, sizeof(*ud->rchans),
- GFP_KERNEL);
- /* BCDMA do not really have flows, but the driver expect it */
- ud->rflow_in_use = devm_kcalloc(dev, BITS_TO_LONGS(ud->rchan_cnt),
- sizeof(unsigned long),
- GFP_KERNEL);
- ud->rflows = devm_kcalloc(dev, ud->rchan_cnt, sizeof(*ud->rflows),
- GFP_KERNEL);
-
- if (!ud->bchan_map || !ud->tchan_map || !ud->rchan_map ||
- !ud->rflow_in_use || !ud->bchans || !ud->tchans || !ud->rchans ||
- !ud->rflows)
- return -ENOMEM;
/* Get resource ranges from tisci */
for (i = 0; i < RM_RANGE_LAST; i++) {
@@ -2476,51 +2415,13 @@ static int bcdma_setup_resources(struct udma_dev *ud)
return 0;
}
-static int pktdma_setup_resources(struct udma_dev *ud)
+static int pktdma_setup_sci_resources(struct udma_dev *ud)
{
int ret, i, j;
struct device *dev = ud->dev;
struct ti_sci_resource *rm_res, irq_res;
struct udma_tisci_rm *tisci_rm = &ud->tisci_rm;
const struct udma_oes_offsets *oes = &ud->soc_data->oes;
- u32 cap3;
-
- /* Set up the throughput level start indexes */
- cap3 = udma_read(ud->mmrs[MMR_GCFG], 0x2c);
- if (UDMA_CAP3_UCHAN_CNT(cap3)) {
- ud->tchan_tpl.levels = 3;
- ud->tchan_tpl.start_idx[1] = UDMA_CAP3_UCHAN_CNT(cap3);
- ud->tchan_tpl.start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
- } else if (UDMA_CAP3_HCHAN_CNT(cap3)) {
- ud->tchan_tpl.levels = 2;
- ud->tchan_tpl.start_idx[0] = UDMA_CAP3_HCHAN_CNT(cap3);
- } else {
- ud->tchan_tpl.levels = 1;
- }
-
- ud->rchan_tpl.levels = ud->tchan_tpl.levels;
- ud->rchan_tpl.start_idx[0] = ud->tchan_tpl.start_idx[0];
- ud->rchan_tpl.start_idx[1] = ud->tchan_tpl.start_idx[1];
-
- ud->tchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tchan_cnt),
- sizeof(unsigned long), GFP_KERNEL);
- ud->tchans = devm_kcalloc(dev, ud->tchan_cnt, sizeof(*ud->tchans),
- GFP_KERNEL);
- ud->rchan_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->rchan_cnt),
- sizeof(unsigned long), GFP_KERNEL);
- ud->rchans = devm_kcalloc(dev, ud->rchan_cnt, sizeof(*ud->rchans),
- GFP_KERNEL);
- ud->rflow_in_use = devm_kcalloc(dev, BITS_TO_LONGS(ud->rflow_cnt),
- sizeof(unsigned long),
- GFP_KERNEL);
- ud->rflows = devm_kcalloc(dev, ud->rflow_cnt, sizeof(*ud->rflows),
- GFP_KERNEL);
- ud->tflow_map = devm_kmalloc_array(dev, BITS_TO_LONGS(ud->tflow_cnt),
- sizeof(unsigned long), GFP_KERNEL);
-
- if (!ud->tchan_map || !ud->rchan_map || !ud->tflow_map || !ud->tchans ||
- !ud->rchans || !ud->rflows || !ud->rflow_in_use)
- return -ENOMEM;
/* Get resource ranges from tisci */
for (i = 0; i < RM_RANGE_LAST; i++) {
@@ -2631,80 +2532,6 @@ static int pktdma_setup_resources(struct udma_dev *ud)
return 0;
}
-static int setup_resources(struct udma_dev *ud)
-{
- struct device *dev = ud->dev;
- int ch_count, ret;
-
- switch (ud->match_data->type) {
- case DMA_TYPE_UDMA:
- ret = udma_setup_resources(ud);
- break;
- case DMA_TYPE_BCDMA:
- ret = bcdma_setup_resources(ud);
- break;
- case DMA_TYPE_PKTDMA:
- ret = pktdma_setup_resources(ud);
- break;
- default:
- return -EINVAL;
- }
-
- if (ret)
- return ret;
-
- ch_count = ud->bchan_cnt + ud->tchan_cnt + ud->rchan_cnt;
- if (ud->bchan_cnt)
- ch_count -= bitmap_weight(ud->bchan_map, ud->bchan_cnt);
- ch_count -= bitmap_weight(ud->tchan_map, ud->tchan_cnt);
- ch_count -= bitmap_weight(ud->rchan_map, ud->rchan_cnt);
- if (!ch_count)
- return -ENODEV;
-
- ud->channels = devm_kcalloc(dev, ch_count, sizeof(*ud->channels),
- GFP_KERNEL);
- if (!ud->channels)
- return -ENOMEM;
-
- switch (ud->match_data->type) {
- case DMA_TYPE_UDMA:
- dev_info(dev,
- "Channels: %d (tchan: %u, rchan: %u, gp-rflow: %u)\n",
- ch_count,
- ud->tchan_cnt - bitmap_weight(ud->tchan_map,
- ud->tchan_cnt),
- ud->rchan_cnt - bitmap_weight(ud->rchan_map,
- ud->rchan_cnt),
- ud->rflow_cnt - bitmap_weight(ud->rflow_gp_map,
- ud->rflow_cnt));
- break;
- case DMA_TYPE_BCDMA:
- dev_info(dev,
- "Channels: %d (bchan: %u, tchan: %u, rchan: %u)\n",
- ch_count,
- ud->bchan_cnt - bitmap_weight(ud->bchan_map,
- ud->bchan_cnt),
- ud->tchan_cnt - bitmap_weight(ud->tchan_map,
- ud->tchan_cnt),
- ud->rchan_cnt - bitmap_weight(ud->rchan_map,
- ud->rchan_cnt));
- break;
- case DMA_TYPE_PKTDMA:
- dev_info(dev,
- "Channels: %d (tchan: %u, rchan: %u)\n",
- ch_count,
- ud->tchan_cnt - bitmap_weight(ud->tchan_map,
- ud->tchan_cnt),
- ud->rchan_cnt - bitmap_weight(ud->rchan_map,
- ud->rchan_cnt));
- break;
- default:
- break;
- }
-
- return ch_count;
-}
-
static int udma_probe(struct platform_device *pdev)
{
struct device_node *navss_node = pdev->dev.parent->of_node;
@@ -2747,6 +2574,9 @@ static int udma_probe(struct platform_device *pdev)
ud->decrement_byte_counters = udma_decrement_byte_counters;
ud->psil_pair = navss_psil_pair;
ud->psil_unpair = navss_psil_unpair;
+ ud->udma_setup_resources = udma_setup_resources;
+ ud->bcdma_setup_sci_resources = bcdma_setup_sci_resources;
+ ud->pktdma_setup_sci_resources = pktdma_setup_sci_resources;
ret = udma_get_mmrs(pdev, ud);
if (ret)
diff --git a/drivers/dma/ti/k3-udma.h b/drivers/dma/ti/k3-udma.h
index e4b512d9ffb2e..6a95eb1ece064 100644
--- a/drivers/dma/ti/k3-udma.h
+++ b/drivers/dma/ti/k3-udma.h
@@ -353,6 +353,9 @@ struct udma_dev {
u32 dst_thread);
int (*psil_unpair)(struct udma_dev *ud, u32 src_thread,
u32 dst_thread);
+ int (*udma_setup_resources)(struct udma_dev *ud);
+ int (*bcdma_setup_sci_resources)(struct udma_dev *ud);
+ int (*pktdma_setup_sci_resources)(struct udma_dev *ud);
};
struct udma_desc {
@@ -675,6 +678,11 @@ struct udma_bchan *__udma_reserve_bchan(struct udma_dev *ud, enum udma_tp_level
struct udma_tchan *__udma_reserve_tchan(struct udma_dev *ud, enum udma_tp_level tpl, int id);
struct udma_rchan *__udma_reserve_rchan(struct udma_dev *ud, enum udma_tp_level tpl, int id);
+int udma_setup_resources(struct udma_dev *ud);
+int bcdma_setup_resources(struct udma_dev *ud);
+int pktdma_setup_resources(struct udma_dev *ud);
+int setup_resources(struct udma_dev *ud);
+
/* Direct access to UDMA low lever resources for the glue layer */
int xudma_navss_psil_pair(struct udma_dev *ud, u32 src_thread, u32 dst_thread);
int xudma_navss_psil_unpair(struct udma_dev *ud, u32 src_thread,
--
2.53.0
next prev parent reply other threads:[~2026-04-28 8:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 8:51 [PATCH v6 00/19] dmaengine: ti: Add support for BCDMA v2 and PKTDMA v2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 01/19] dmaengine: ti: k3-udma: Fix sporadic crash on AM62x Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 02/19] dmaengine: ti: k3-udma: move macros to header file Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 03/19] dmaengine: ti: k3-udma: move structs and enums " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 04/19] dmaengine: ti: k3-udma: move static inline helper functions " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 05/19] dmaengine: ti: k3-udma: move descriptor management to k3-udma-common.c Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 06/19] dmaengine: ti: k3-udma: move ring management functions " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 07/19] dmaengine: ti: k3-udma: Add variant-specific function pointers to udma_dev Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 08/19] dmaengine: ti: k3-udma: move udma utility functions to k3-udma-common.c Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 09/19] dmaengine: ti: k3-udma: move resource management " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` Sai Sree Kartheek Adivi [this message]
2026-04-28 8:51 ` [PATCH v6 11/19] dmaengine: ti: k3-udma: move inclusion of k3-udma-private.c " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 12/19] drivers: soc: ti: k3-ringacc: handle absence of tisci Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 13/19] dt-bindings: dma: ti: Add K3 BCDMA V2 Sai Sree Kartheek Adivi
2026-04-30 7:29 ` Krzysztof Kozlowski
2026-04-28 8:51 ` [PATCH v6 14/19] dt-bindings: dma: ti: Add K3 PKTDMA V2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 15/19] dmaengine: ti: k3-psil-am62l: Add AM62Lx PSIL and PDMA data Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 16/19] dmaengine: ti: k3-udma-v2: New driver for K3 BCDMA_V2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 17/19] dmaengine: ti: k3-udma-v2: Add support for PKTDMA V2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 18/19] dmaengine: ti: k3-udma-v2: Update glue layer to support " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 19/19] dmaengine: ti: k3-udma: Validate resource ID and fix logging in reservation Sai Sree Kartheek Adivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428085202.1724548-11-s-adivi@ti.com \
--to=s-adivi@ti.com \
--cc=Frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=gehariprasath@ti.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=peter.ujfalusi@gmail.com \
--cc=r-sharma3@ti.com \
--cc=robh@kernel.org \
--cc=ssantosh@kernel.org \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox