From: Sai Sree Kartheek Adivi <s-adivi@ti.com>
To: <peter.ujfalusi@gmail.com>, <vkoul@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>, <nm@ti.com>,
<ssantosh@kernel.org>, <dmaengine@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <vigneshr@ti.com>,
<Frank.li@nxp.com>, <s-adivi@ti.com>
Cc: <r-sharma3@ti.com>, <gehariprasath@ti.com>
Subject: [PATCH v6 06/19] dmaengine: ti: k3-udma: move ring management functions to k3-udma-common.c
Date: Tue, 28 Apr 2026 14:21:35 +0530 [thread overview]
Message-ID: <20260428085202.1724548-7-s-adivi@ti.com> (raw)
In-Reply-To: <20260428085202.1724548-1-s-adivi@ti.com>
Relocate the ring management functions such as push, pop, and reset
from k3-udma.c to k3-udma-common.c file. These operations are
common across multiple K3 UDMA variants and will be reused by
future implementations like K3 UDMA v2.
No functional changes intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
---
drivers/dma/ti/k3-udma-common.c | 103 ++++++++++++++++++++++++++++++++
drivers/dma/ti/k3-udma.c | 100 -------------------------------
drivers/dma/ti/k3-udma.h | 4 ++
3 files changed, 107 insertions(+), 100 deletions(-)
diff --git a/drivers/dma/ti/k3-udma-common.c b/drivers/dma/ti/k3-udma-common.c
index 9cb35759c70bb..4dcf986f84d87 100644
--- a/drivers/dma/ti/k3-udma-common.c
+++ b/drivers/dma/ti/k3-udma-common.c
@@ -1239,5 +1239,108 @@ void udma_desc_pre_callback(struct virt_dma_chan *vc,
}
EXPORT_SYMBOL_GPL(udma_desc_pre_callback);
+int udma_push_to_ring(struct udma_chan *uc, int idx)
+{
+ struct udma_desc *d = uc->desc;
+ struct k3_ring *ring = NULL;
+ dma_addr_t paddr;
+
+ switch (uc->config.dir) {
+ case DMA_DEV_TO_MEM:
+ ring = uc->rflow->fd_ring;
+ break;
+ case DMA_MEM_TO_DEV:
+ case DMA_MEM_TO_MEM:
+ ring = uc->tchan->t_ring;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* RX flush packet: idx == -1 is only passed in case of DEV_TO_MEM */
+ if (idx == -1) {
+ paddr = udma_get_rx_flush_hwdesc_paddr(uc);
+ } else {
+ paddr = udma_curr_cppi5_desc_paddr(d, idx);
+
+ wmb(); /* Ensure that writes are not moved over this point */
+ }
+
+ return k3_ringacc_ring_push(ring, &paddr);
+}
+EXPORT_SYMBOL_GPL(udma_push_to_ring);
+
+int udma_pop_from_ring(struct udma_chan *uc, dma_addr_t *addr)
+{
+ struct k3_ring *ring = NULL;
+ int ret;
+
+ switch (uc->config.dir) {
+ case DMA_DEV_TO_MEM:
+ ring = uc->rflow->r_ring;
+ break;
+ case DMA_MEM_TO_DEV:
+ case DMA_MEM_TO_MEM:
+ ring = uc->tchan->tc_ring;
+ break;
+ default:
+ return -ENOENT;
+ }
+
+ ret = k3_ringacc_ring_pop(ring, addr);
+ if (ret)
+ return ret;
+
+ rmb(); /* Ensure that reads are not moved before this point */
+
+ /* Teardown completion */
+ if (cppi5_desc_is_tdcm(*addr))
+ return 0;
+
+ /* Check for flush descriptor */
+ if (udma_desc_is_rx_flush(uc, *addr))
+ return -ENOENT;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(udma_pop_from_ring);
+
+void udma_reset_rings(struct udma_chan *uc)
+{
+ struct k3_ring *ring1 = NULL;
+ struct k3_ring *ring2 = NULL;
+
+ switch (uc->config.dir) {
+ case DMA_DEV_TO_MEM:
+ if (uc->rchan) {
+ ring1 = uc->rflow->fd_ring;
+ ring2 = uc->rflow->r_ring;
+ }
+ break;
+ case DMA_MEM_TO_DEV:
+ case DMA_MEM_TO_MEM:
+ if (uc->tchan) {
+ ring1 = uc->tchan->t_ring;
+ ring2 = uc->tchan->tc_ring;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (ring1)
+ k3_ringacc_ring_reset_dma(ring1,
+ k3_ringacc_ring_get_occ(ring1));
+ if (ring2)
+ k3_ringacc_ring_reset(ring2);
+
+ /* make sure we are not leaking memory by stalled descriptor */
+ if (uc->terminated_desc) {
+ udma_desc_free(&uc->terminated_desc->vd);
+ uc->terminated_desc = NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(udma_reset_rings);
+
MODULE_DESCRIPTION("Texas Instruments K3 UDMA Common Library");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 96df0893fa095..5c84741881cae 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -174,106 +174,6 @@ static bool udma_is_chan_paused(struct udma_chan *uc)
return false;
}
-static int udma_push_to_ring(struct udma_chan *uc, int idx)
-{
- struct udma_desc *d = uc->desc;
- struct k3_ring *ring = NULL;
- dma_addr_t paddr;
-
- switch (uc->config.dir) {
- case DMA_DEV_TO_MEM:
- ring = uc->rflow->fd_ring;
- break;
- case DMA_MEM_TO_DEV:
- case DMA_MEM_TO_MEM:
- ring = uc->tchan->t_ring;
- break;
- default:
- return -EINVAL;
- }
-
- /* RX flush packet: idx == -1 is only passed in case of DEV_TO_MEM */
- if (idx == -1) {
- paddr = udma_get_rx_flush_hwdesc_paddr(uc);
- } else {
- paddr = udma_curr_cppi5_desc_paddr(d, idx);
-
- wmb(); /* Ensure that writes are not moved over this point */
- }
-
- return k3_ringacc_ring_push(ring, &paddr);
-}
-
-static int udma_pop_from_ring(struct udma_chan *uc, dma_addr_t *addr)
-{
- struct k3_ring *ring = NULL;
- int ret;
-
- switch (uc->config.dir) {
- case DMA_DEV_TO_MEM:
- ring = uc->rflow->r_ring;
- break;
- case DMA_MEM_TO_DEV:
- case DMA_MEM_TO_MEM:
- ring = uc->tchan->tc_ring;
- break;
- default:
- return -ENOENT;
- }
-
- ret = k3_ringacc_ring_pop(ring, addr);
- if (ret)
- return ret;
-
- rmb(); /* Ensure that reads are not moved before this point */
-
- /* Teardown completion */
- if (cppi5_desc_is_tdcm(*addr))
- return 0;
-
- /* Check for flush descriptor */
- if (udma_desc_is_rx_flush(uc, *addr))
- return -ENOENT;
-
- return 0;
-}
-
-static void udma_reset_rings(struct udma_chan *uc)
-{
- struct k3_ring *ring1 = NULL;
- struct k3_ring *ring2 = NULL;
-
- switch (uc->config.dir) {
- case DMA_DEV_TO_MEM:
- if (uc->rchan) {
- ring1 = uc->rflow->fd_ring;
- ring2 = uc->rflow->r_ring;
- }
- break;
- case DMA_MEM_TO_DEV:
- case DMA_MEM_TO_MEM:
- if (uc->tchan) {
- ring1 = uc->tchan->t_ring;
- ring2 = uc->tchan->tc_ring;
- }
- break;
- default:
- break;
- }
-
- if (ring1)
- k3_ringacc_ring_reset_dma(ring1,
- k3_ringacc_ring_get_occ(ring1));
- if (ring2)
- k3_ringacc_ring_reset(ring2);
-
- /* make sure we are not leaking memory by stalled descriptor */
- if (uc->terminated_desc) {
- udma_desc_free(&uc->terminated_desc->vd);
- uc->terminated_desc = NULL;
- }
-}
-
static void udma_decrement_byte_counters(struct udma_chan *uc, u32 val)
{
if (uc->desc->dir == DMA_DEV_TO_MEM) {
diff --git a/drivers/dma/ti/k3-udma.h b/drivers/dma/ti/k3-udma.h
index 7c807bd9e178b..4c6e5b946d5cf 100644
--- a/drivers/dma/ti/k3-udma.h
+++ b/drivers/dma/ti/k3-udma.h
@@ -610,6 +610,10 @@ void udma_desc_pre_callback(struct virt_dma_chan *vc,
struct virt_dma_desc *vd,
struct dmaengine_result *result);
+int udma_push_to_ring(struct udma_chan *uc, int idx);
+int udma_pop_from_ring(struct udma_chan *uc, dma_addr_t *addr);
+void udma_reset_rings(struct udma_chan *uc);
+
/* Direct access to UDMA low lever resources for the glue layer */
int xudma_navss_psil_pair(struct udma_dev *ud, u32 src_thread, u32 dst_thread);
int xudma_navss_psil_unpair(struct udma_dev *ud, u32 src_thread,
--
2.53.0
next prev parent reply other threads:[~2026-04-28 8:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 8:51 [PATCH v6 00/19] dmaengine: ti: Add support for BCDMA v2 and PKTDMA v2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 01/19] dmaengine: ti: k3-udma: Fix sporadic crash on AM62x Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 02/19] dmaengine: ti: k3-udma: move macros to header file Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 03/19] dmaengine: ti: k3-udma: move structs and enums " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 04/19] dmaengine: ti: k3-udma: move static inline helper functions " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 05/19] dmaengine: ti: k3-udma: move descriptor management to k3-udma-common.c Sai Sree Kartheek Adivi
2026-04-28 8:51 ` Sai Sree Kartheek Adivi [this message]
2026-04-28 8:51 ` [PATCH v6 07/19] dmaengine: ti: k3-udma: Add variant-specific function pointers to udma_dev Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 08/19] dmaengine: ti: k3-udma: move udma utility functions to k3-udma-common.c Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 09/19] dmaengine: ti: k3-udma: move resource management " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 10/19] dmaengine: ti: k3-udma: refactor resource setup functions Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 11/19] dmaengine: ti: k3-udma: move inclusion of k3-udma-private.c to k3-udma-common.c Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 12/19] drivers: soc: ti: k3-ringacc: handle absence of tisci Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 13/19] dt-bindings: dma: ti: Add K3 BCDMA V2 Sai Sree Kartheek Adivi
2026-04-30 7:29 ` Krzysztof Kozlowski
2026-04-28 8:51 ` [PATCH v6 14/19] dt-bindings: dma: ti: Add K3 PKTDMA V2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 15/19] dmaengine: ti: k3-psil-am62l: Add AM62Lx PSIL and PDMA data Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 16/19] dmaengine: ti: k3-udma-v2: New driver for K3 BCDMA_V2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 17/19] dmaengine: ti: k3-udma-v2: Add support for PKTDMA V2 Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 18/19] dmaengine: ti: k3-udma-v2: Update glue layer to support " Sai Sree Kartheek Adivi
2026-04-28 8:51 ` [PATCH v6 19/19] dmaengine: ti: k3-udma: Validate resource ID and fix logging in reservation Sai Sree Kartheek Adivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260428085202.1724548-7-s-adivi@ti.com \
--to=s-adivi@ti.com \
--cc=Frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=gehariprasath@ti.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=peter.ujfalusi@gmail.com \
--cc=r-sharma3@ti.com \
--cc=robh@kernel.org \
--cc=ssantosh@kernel.org \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox