public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Pengyu Luo <mitltlatltl@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Martin Kepplinger-Novakovic <martink@posteo.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Hans Verkuil <hverkuil@kernel.org>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	Pengyu Luo <mitltlatltl@gmail.com>
Subject: [PATCH v2 2/4] media: hi846: fix link frequency handling
Date: Fri,  1 May 2026 17:54:31 +0800	[thread overview]
Message-ID: <20260501095433.1609309-3-mitltlatltl@gmail.com> (raw)
In-Reply-To: <20260501095433.1609309-1-mitltlatltl@gmail.com>

link frequency is tied to PLL configuration, lane count, and external
clock rate, so use runtime here instead of hardcoding for specific
configuration. To implement this, this commit did

1. dropped exposed link freqs as a v4l2_ctrl, since we are runtime
now, it is inconvenient and unnecessary to expose it, and
hi846_set_ctrl has nothing to do with it.

2. attached pll_cfg_2lane to current mode, and use it with clock, lane
count to calculate link frequency, we use 2-lane config as default,
but we can halve it easily for 4-lane case.

3. dropped mclk clock rate check.

Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 drivers/media/i2c/hi846.c | 72 +++++++++++++++++++--------------------
 1 file changed, 36 insertions(+), 36 deletions(-)

diff --git a/drivers/media/i2c/hi846.c b/drivers/media/i2c/hi846.c
index 7f069aca0fce..3a0b1e124d9d 100644
--- a/drivers/media/i2c/hi846.c
+++ b/drivers/media/i2c/hi846.c
@@ -219,8 +219,8 @@ struct hi846_mode {
 	/* Horizontal timing size */
 	u32 llp;
 
-	/* Link frequency needed for this resolution */
-	u8 link_freq_index;
+	/* PLL configuration for 4-lane link at this resolution */
+	u16 pll_cfg_4lane;
 
 	u16 fps;
 
@@ -1040,13 +1040,6 @@ static const char * const hi846_test_pattern_menu[] = {
 	"Resolution Pattern",
 };
 
-#define FREQ_INDEX_640	0
-#define FREQ_INDEX_1280	1
-static const s64 hi846_link_freqs[] = {
-	[FREQ_INDEX_640] = 80000000,
-	[FREQ_INDEX_1280] = 200000000,
-};
-
 static const struct hi846_reg_list hi846_init_regs_list_2lane = {
 	.num_of_regs = ARRAY_SIZE(hi846_init_2lane),
 	.regs = hi846_init_2lane,
@@ -1061,7 +1054,7 @@ static const struct hi846_mode supported_modes[] = {
 	{
 		.width = 640,
 		.height = 480,
-		.link_freq_index = FREQ_INDEX_640,
+		.pll_cfg_4lane = 0x4924, /* HI846_REG_PLL_CFG_MIPI2_H */
 		.fps = 120,
 		.frame_len = 631,
 		.llp = HI846_LINE_LENGTH,
@@ -1086,7 +1079,7 @@ static const struct hi846_mode supported_modes[] = {
 	{
 		.width = 1280,
 		.height = 720,
-		.link_freq_index = FREQ_INDEX_1280,
+		.pll_cfg_4lane = 0x4924, /* HI846_REG_PLL_CFG_MIPI2_H */
 		.fps = 90,
 		.frame_len = 842,
 		.llp = HI846_LINE_LENGTH,
@@ -1112,7 +1105,7 @@ static const struct hi846_mode supported_modes[] = {
 	{
 		.width = 1632,
 		.height = 1224,
-		.link_freq_index = FREQ_INDEX_1280,
+		.pll_cfg_4lane = 0x4924, /* HI846_REG_PLL_CFG_MIPI2_H */
 		.fps = 30,
 		.frame_len = 2526,
 		.llp = HI846_LINE_LENGTH,
@@ -1161,7 +1154,6 @@ struct hi846 {
 	struct v4l2_ctrl_handler ctrl_handler;
 	u8 nr_lanes;
 
-	struct v4l2_ctrl *link_freq;
 	struct v4l2_ctrl *pixel_rate;
 	struct v4l2_ctrl *vblank;
 	struct v4l2_ctrl *hblank;
@@ -1192,21 +1184,37 @@ static const struct hi846_datafmt *hi846_find_datafmt(u32 code)
 	return NULL;
 }
 
-static inline u8 hi846_get_link_freq_index(struct hi846 *hi846)
+static u64
+hi846_get_link_freq(struct hi846 *hi846, const struct hi846_mode *cur_mode)
 {
-	return hi846->cur_mode->link_freq_index;
-}
+	u16 cfg = cur_mode->pll_cfg_4lane;
+	u64 mclk = clk_get_rate(hi846->clock);
 
-static u64 hi846_get_link_freq(struct hi846 *hi846)
-{
-	u8 index = hi846_get_link_freq_index(hi846);
+	/* NOTE: 6, 7 actually map to 8, 10, but the used won't be that big */
+	u8 post_div1 = 1 + FIELD_GET(GENMASK(10, 8), cfg);
+	u8 post_div2 = 1 << FIELD_GET(GENMASK(12, 11), cfg);
+
+	/*
+	 * HI846_REG_PLL_CFG_MIPI1_H = 0x025a, it is fixed in listed modes
+	 * [11:8]: 0x02 => pre_div = 3
+	 * [7:0]: 0x5a => multiplier = 90
+	 */
+	u64 link_freq = mclk / 3 * 90 / post_div1 / post_div2;
+	/*
+	 * for shared modes, since lane count is halved for 2-lane, then getting
+	 * link_freq doubled to match the same data rate. Since 720x480 is
+	 * 2-lane only(i.e. reg_list_4lane.num_of_regs == 0), no pll cfg for
+	 * 4-lane, the pll cfg is actually for 2-lane, so use the cfg as is.
+	 */
+	if (hi846->nr_lanes == 2 && cur_mode->reg_list_4lane.num_of_regs)
+		link_freq *= 2;
 
-	return hi846_link_freqs[index];
+	return link_freq;
 }
 
 static u64 hi846_calc_pixel_rate(struct hi846 *hi846)
 {
-	u64 link_freq = hi846_get_link_freq(hi846);
+	u64 link_freq = hi846_get_link_freq(hi846, hi846->cur_mode);
 	u64 pixel_rate = link_freq * 2 * hi846->nr_lanes;
 
 	do_div(pixel_rate, HI846_RGB_DEPTH);
@@ -1426,14 +1434,6 @@ static int hi846_init_controls(struct hi846 *hi846)
 
 	ctrl_hdlr->lock = &hi846->mutex;
 
-	hi846->link_freq =
-		v4l2_ctrl_new_int_menu(ctrl_hdlr, &hi846_ctrl_ops,
-				       V4L2_CID_LINK_FREQ,
-				       ARRAY_SIZE(hi846_link_freqs) - 1,
-				       0, hi846_link_freqs);
-	if (hi846->link_freq)
-		hi846->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
-
 	hi846->pixel_rate =
 		v4l2_ctrl_new_std(ctrl_hdlr, &hi846_ctrl_ops,
 				  V4L2_CID_PIXEL_RATE, 0,
@@ -1503,10 +1503,10 @@ static int hi846_set_video_mode(struct hi846 *hi846, int fps)
 	u64 frame_length;
 	int ret = 0;
 	int dummy_lines;
-	u64 link_freq = hi846_get_link_freq(hi846);
+	u64 link_freq = hi846_get_link_freq(hi846, hi846->cur_mode);
 
 	dev_dbg(&client->dev, "%s: link freq: %llu\n", __func__,
-		hi846_get_link_freq(hi846));
+		link_freq);
 
 	do_div(link_freq, fps);
 	frame_length = link_freq;
@@ -1749,7 +1749,6 @@ static int hi846_set_format(struct v4l2_subdev *sd,
 	mf->code = HI846_MEDIA_BUS_FORMAT;
 	mf->field = V4L2_FIELD_NONE;
 
-	__v4l2_ctrl_s_ctrl(hi846->link_freq, hi846_get_link_freq_index(hi846));
 	__v4l2_ctrl_s_ctrl_int64(hi846->pixel_rate,
 				 hi846_calc_pixel_rate(hi846));
 
@@ -1950,16 +1949,17 @@ static int hi846_identify_module(struct hi846 *hi846)
 static s64 hi846_check_link_freqs(struct hi846 *hi846,
 				  struct v4l2_fwnode_endpoint *ep)
 {
-	const s64 *freqs = hi846_link_freqs;
-	int freqs_count = ARRAY_SIZE(hi846_link_freqs);
+	int freqs_count = ARRAY_SIZE(supported_modes);
+	u64 link_freq;
 	int i, j;
 
 	for (i = 0; i < freqs_count; i++) {
+		link_freq = hi846_get_link_freq(hi846, &supported_modes[i]);
 		for (j = 0; j < ep->nr_of_link_frequencies; j++)
-			if (freqs[i] == ep->link_frequencies[j])
+			if (link_freq == ep->link_frequencies[j])
 				break;
 		if (j == ep->nr_of_link_frequencies)
-			return freqs[i];
+			return link_freq;
 	}
 
 	return 0;
-- 
2.54.0



  parent reply	other threads:[~2026-05-01  9:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-01  9:54 [PATCH v2 0/4] fix and improve for Hi846 Pengyu Luo
2026-05-01  9:54 ` [PATCH v2 1/4] media: hi846: fix hi846_write_reg_16 handling Pengyu Luo
2026-05-01  9:54 ` Pengyu Luo [this message]
2026-05-01  9:54 ` [PATCH v2 3/4] media: hi846: Add 6MP and 8MP modes support Pengyu Luo
2026-05-01  9:54 ` [PATCH v2 4/4] arm64: dts: imx8mq-librem5: Correct link frequency list Pengyu Luo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260501095433.1609309-3-mitltlatltl@gmail.com \
    --to=mitltlatltl@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=hverkuil@kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox