* [PATCH v2 1/1] pinctrl: imx1: Allow parsing DT without function nodes
@ 2026-05-05 16:09 Frank Li
0 siblings, 0 replies; only message in thread
From: Frank Li @ 2026-05-05 16:09 UTC (permalink / raw)
To: Sébastien Szymanski, Dong Aisheng, Fabio Estevam, Frank Li,
Jacky Bai, Pengutronix Kernel Team, NXP S32 Linux Team,
Linus Walleij, Sascha Hauer, open list:PIN CONTROLLER - FREESCALE,
open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
open list
Cc: imx
The old format to define pinctrl settings for imx in DT has two hierarchy
levels. The first level are function device nodes. The second level are
pingroups which contain a property fsl,pins. The original ntention was to
define all pin functions in a single dtsi file and just reference the
correct ones in the board files.
The commit ("5fcdf6a7ed95e pinctrl: imx: Allow parsing DT without function
nodes") already make moden i.MX chip support flatten layout.
Make legacy chipes (more than 15 years) support this flatten layout also.
Fixes: e948cbdc41d6f ("ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy")
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change in v2
- Add Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
- Use of_property_present()
---
drivers/pinctrl/freescale/pinctrl-imx1-core.c | 48 ++++++++++++++++---
1 file changed, 41 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
index b36c8a1461b7c..b7bd4ef9c0db5 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c
@@ -540,10 +540,34 @@ static int imx1_pinctrl_parse_functions(struct device_node *np,
return 0;
}
+/*
+ * Check if the DT contains pins in the direct child nodes. This indicates the
+ * newer DT format to store pins. This function returns true if the first found
+ * fsl,pins property is in a child of np. Otherwise false is returned.
+ */
+static bool imx1_pinctrl_dt_is_flat_functions(struct device_node *np)
+{
+ struct device_node *function_np;
+ struct device_node *pinctrl_np;
+
+ for_each_child_of_node(np, function_np) {
+ if (of_property_present(function_np, "fsl,pins"))
+ return true;
+
+ for_each_child_of_node(function_np, pinctrl_np) {
+ if (of_property_present(pinctrl_np, "fsl,pins"))
+ return false;
+ }
+ }
+
+ return true;
+}
+
static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
struct imx1_pinctrl *pctl, struct imx1_pinctrl_soc_info *info)
{
struct device_node *np = pdev->dev.of_node;
+ bool flat_funcs;
int ret;
u32 nfuncs = 0;
u32 ngroups = 0;
@@ -552,9 +576,15 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
if (!np)
return -ENODEV;
- for_each_child_of_node_scoped(np, child) {
- ++nfuncs;
- ngroups += of_get_child_count(child);
+ flat_funcs = imx1_pinctrl_dt_is_flat_functions(np);
+ if (flat_funcs) {
+ nfuncs = 1;
+ ngroups = of_get_child_count(np);
+ } else {
+ for_each_child_of_node_scoped(np, child) {
+ ++nfuncs;
+ ngroups += of_get_child_count(child);
+ }
}
if (!nfuncs) {
@@ -574,10 +604,14 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev,
if (!info->functions || !info->groups)
return -ENOMEM;
- for_each_child_of_node_scoped(np, child) {
- ret = imx1_pinctrl_parse_functions(child, info, ifunc++);
- if (ret == -ENOMEM)
- return -ENOMEM;
+ if (flat_funcs) {
+ imx1_pinctrl_parse_functions(np, info, 0);
+ } else {
+ for_each_child_of_node_scoped(np, child) {
+ ret = imx1_pinctrl_parse_functions(child, info, ifunc++);
+ if (ret == -ENOMEM)
+ return -ENOMEM;
+ }
}
return 0;
--
2.43.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-05-05 16:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-05 16:09 [PATCH v2 1/1] pinctrl: imx1: Allow parsing DT without function nodes Frank Li
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox