[PATCH v8 phy-next 01/31] PCI: cadence: Preserve all error codes in cdns_plat_pcie_probe()

[PATCH v8 phy-next 01/31] PCI: cadence: Preserve all error codes in cdns_plat_pcie_probe()

[Vladimir Oltean]

The blamed commit functionally changed the error path of
cdns_pcie_host_probe(), now cdns_plat_pcie_probe().

When the old code path executed "goto err_get_sync", the PCIe controller
probe function propagated the pm_runtime_get_sync() error code. The new
code doesn't, and returns 0.

Similarly for the "goto err_init" previously triggered by
cdns_pcie_host_init() errors, and now triggered by
cdns_pcie_host_setup() and cdns_pcie_ep_setup() errors. These are not
propagated and will result in probing success, which is incorrect.

Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Manikandan K Pillai <mpillai@cadence.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>

v7->v8: patch is new, issue was flagged by Sashiko
https://sashiko.dev/#/patchset/20260430110652.558622-1-vladimir.oltean@nxp.com
---
 drivers/pci/controller/cadence/pcie-cadence-plat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c
index b067a3296dd3..8b12a46b5601 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
@@ -126,7 +126,7 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 	while (phy_count--)
 		device_link_del(cdns_plat_pcie->pcie->link[phy_count]);
 
-	return 0;
+	return ret;
 }
 
 static void cdns_plat_pcie_shutdown(struct platform_device *pdev)
-- 
2.34.1

Re: [PATCH v8 phy-next 01/31] PCI: cadence: Preserve all error codes in cdns_plat_pcie_probe()

[Bjorn Helgaas]

[+cc Tom, author of bd22885aa188 in case there's something subtle here]

On Tue, May 05, 2026 at 01:04:53PM +0300, Vladimir Oltean wrote:
> The blamed commit functionally changed the error path of
> cdns_pcie_host_probe(), now cdns_plat_pcie_probe().
> 
> When the old code path executed "goto err_get_sync", the PCIe controller
> probe function propagated the pm_runtime_get_sync() error code. The new
> code doesn't, and returns 0.
> 
> Similarly for the "goto err_init" previously triggered by
> cdns_pcie_host_init() errors, and now triggered by
> cdns_pcie_host_setup() and cdns_pcie_ep_setup() errors. These are not
> propagated and will result in probing success, which is incorrect.
> 
> Fixes: bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library")
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
> Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
> Cc: Manikandan K Pillai <mpillai@cadence.com>
> Cc: Manivannan Sadhasivam <mani@kernel.org>
> Cc: Rob Herring <robh@kernel.org>

I guess this driver is orphaned.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>

> v7->v8: patch is new, issue was flagged by Sashiko
> https://sashiko.dev/#/patchset/20260430110652.558622-1-vladimir.oltean@nxp.com
> ---
>  drivers/pci/controller/cadence/pcie-cadence-plat.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c
> index b067a3296dd3..8b12a46b5601 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
> +++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
> @@ -126,7 +126,7 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
>  	while (phy_count--)
>  		device_link_del(cdns_plat_pcie->pcie->link[phy_count]);
>  
> -	return 0;
> +	return ret;

This affects cases where pm_runtime_get_sync(),
cdns_pcie_host_setup(), or cdns_pcie_ep_setup() return failure.

Seems right to me to fail the probe when these fail.

Not all users of pm_runtime_get_sync() check for failure, but I think
all the other controller drivers that do check return failures from
the .probe().

>  }
>  
>  static void cdns_plat_pcie_shutdown(struct platform_device *pdev)
> -- 
> 2.34.1
> 

[PATCH v8 phy-next 02/31] ata: add <linux/pm_runtime.h> where missing

[Vladimir Oltean]

It appears that libahci.c, ahci.c as well as the ahci_brcm, ahci_ceva
and ahci_qoriq drivers are using runtime PM operations without including
<linux/pm_runtime.h>. This header is somehow being indirectly provided
by <linux/phy/phy.h>, which would like to drop it (none of the functions
it exports need it).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
---
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Niklas Cassel <cassel@kernel.org>

v2->v8: none
v1->v2: collect tag
---
 drivers/ata/ahci.c       | 1 +
 drivers/ata/ahci_brcm.c  | 1 +
 drivers/ata/ahci_ceva.c  | 1 +
 drivers/ata/ahci_qoriq.c | 1 +
 drivers/ata/libahci.c    | 1 +
 5 files changed, 5 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 1d73a53370cf..1396a53bd6df 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -26,6 +26,7 @@
 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/gfp.h>
+#include <linux/pm_runtime.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 29be74fedcf0..48460e515722 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/string.h>
 
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index 2d6a08c23d6a..3938bf378341 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include "ahci.h"
 
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 0dec1a17e5b1..409152bfefb6 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/libata.h>
 #include "ahci.h"
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index c79abdfcd7a9..e0de4703a4f2 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -30,6 +30,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
 #include <linux/pci.h>
+#include <linux/pm_runtime.h>
 #include "ahci.h"
 #include "libata.h"
 
-- 
2.34.1

[PATCH v8 phy-next 03/31] PCI: Add missing headers transitively included by <linux/phy/phy.h>

[Vladimir Oltean]

The tegra as well as a few dwc PCI controller drivers uses PM runtime
operations without including the required <linux/pm_runtime.h> header.

Similarly, pcie-rockchip-host, pcie-starfive as well as a few dwc PCI
controllers use the regulator consumer API without including
<linux/regulator/consumer.h>.

pcie-spacemit-k1.c uses of_get_next_available_child() and of_node_put()
without including <linux/of.h>.

It seems these function prototypes were indirectly provided by
<linux/phy/phy.h>, mostly by mistake (none of the functions it exports
need it).

Before the PHY header can drop the unnecessary includes, make sure the
PCI controller drivers include what they use.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
---
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Yixun Lan <dlan@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Kevin Xie <kevin.xie@starfivetech.com>

v5->v8: none
v4->v5: fix pcie-spacemit-k1 driver, previously missed due to limited
        build coverage
v2->v4: none
v1->v2: collect tag, adjust commit title
---
 drivers/pci/controller/dwc/pci-keystone.c     | 1 +
 drivers/pci/controller/dwc/pcie-dw-rockchip.c | 1 +
 drivers/pci/controller/dwc/pcie-histb.c       | 1 +
 drivers/pci/controller/dwc/pcie-qcom-ep.c     | 1 +
 drivers/pci/controller/dwc/pcie-spacemit-k1.c | 3 +++
 drivers/pci/controller/dwc/pcie-tegra194.c    | 1 +
 drivers/pci/controller/pci-tegra.c            | 1 +
 drivers/pci/controller/pcie-rockchip-host.c   | 1 +
 drivers/pci/controller/plda/pcie-starfive.c   | 1 +
 9 files changed, 11 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 278d2dba1db0..fe4836925c4e 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -24,6 +24,7 @@
 #include <linux/of_pci.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index 731d93663cca..ae27ce05247c 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -21,6 +21,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/workqueue.h>
 #include <trace/events/pci_controller.h>
diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index a52071589377..432a54c5bfce 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/resource.h>
 #include <linux/reset.h>
 
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 257c2bcb5f76..35a297923e7f 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -19,6 +19,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/module.h>
diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
index be20a520255b..41316aa54106 100644
--- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
+++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
@@ -13,9 +13,12 @@
 #include <linux/gfp.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mod_devicetable.h>
+#include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/types.h>
 
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 9dcfa194050e..f1d08814a73c 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/random.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/resource.h>
 #include <linux/types.h>
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 512309763d1f..a2c1662b6e81 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -36,6 +36,7 @@
 #include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/sizes.h>
 #include <linux/slab.h>
diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index ee1822ca01db..46adb4582fcc 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -24,6 +24,7 @@
 #include <linux/of_pci.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 
 #include "../pci.h"
 #include "pcie-rockchip.h"
diff --git a/drivers/pci/controller/plda/pcie-starfive.c b/drivers/pci/controller/plda/pcie-starfive.c
index 298036c3e7f9..22344cca167b 100644
--- a/drivers/pci/controller/plda/pcie-starfive.c
+++ b/drivers/pci/controller/plda/pcie-starfive.c
@@ -21,6 +21,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include "../../pci.h"
 
-- 
2.34.1

[PATCH v8 phy-next 04/31] usb: add missing headers transitively included by <linux/phy/phy.h>

[Vladimir Oltean]

The chipidea ci_hdrc_imx driver uses regulator consumer API like
regulator_enable() but does not include <linux/regulator/consumer.h>.

The core USB HCD driver calls invalidate_kernel_vmap_range() and
flush_kernel_vmap_range(), but does not include <linux/highmem.h>.

The DWC3 gadget driver calls:
- device_property_present()
- device_property_count_u8()
- device_property_read_u8_array()
but does not include <linux/property.h>

Similarly, dwc3-imx uses device_property_read_bool() without including
<linux/property.h>.

The dwc3-generic-plat driver uses of_device_get_match_data() but does
not include <linux/of.h>.

In all these cases, the necessary includes were still provided somehow,
directly or indirectly, through <linux/phy/phy.h>. I found the following
command to be quite helpful in figuring out the include chain:

$ make KCFLAGS="-H" drivers/usb/dwc3/dwc3-imx.o

Since <linux/phy/phy.h> wants to drop the unnecessary includes, fill in
the required headers to avoid any breakage.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> # dwc3
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: Xu Yang <xu.yang_2@nxp.com>

v7->v8: none
v6->v7:
- add drivers/usb/dwc3/dwc3-imx.c to the list of patched files
- collect tag from Greg, keeping it despite the new addition because the
  change is minor and in the same spirit as the rest
(https://lore.kernel.org/linux-phy/2026033028-squint-yield-4c23@gregkh/)
v2->v6: none
v1->v2: collect tag
---
 drivers/usb/chipidea/ci_hdrc_imx.c   | 1 +
 drivers/usb/core/hcd.c               | 1 +
 drivers/usb/dwc3/dwc3-generic-plat.c | 1 +
 drivers/usb/dwc3/dwc3-imx.c          | 1 +
 drivers/usb/dwc3/gadget.c            | 1 +
 5 files changed, 5 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 56d2ba824a0b..0a21d7cc5f5a 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_qos.h>
+#include <linux/regulator/consumer.h>
 
 #include "ci.h"
 #include "ci_hdrc_imx.h"
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 89221f1ce769..b3826ebcbe98 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/bcd.h>
+#include <linux/highmem.h>
 #include <linux/module.h>
 #include <linux/version.h>
 #include <linux/kernel.h>
diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
index ca69ac0eb07c..2f2ae6f4704f 100644
--- a/drivers/usb/dwc3/dwc3-generic-plat.c
+++ b/drivers/usb/dwc3/dwc3-generic-plat.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/regmap.h>
diff --git a/drivers/usb/dwc3/dwc3-imx.c b/drivers/usb/dwc3/dwc3-imx.c
index 973a486b544d..6e122674edaf 100644
--- a/drivers/usb/dwc3/dwc3-imx.c
+++ b/drivers/usb/dwc3/dwc3-imx.c
@@ -13,6 +13,7 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 
 #include "core.h"
 #include "glue.h"
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3d4ca68e584c..b5a6fd2899f1 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-- 
2.34.1

[PATCH v8 phy-next 05/31] drm: add <linux/pm_runtime.h> where missing

[Vladimir Oltean]

Multiple DRM bridge drivers use runtime PM operations without
including the proper header, instead relying on transitive inclusion
by <linux/phy/phy.h>.

The PHY subsystem wants to get rid of headers it provides for no reason,
so modify these drivers to include what they need directly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Rob Clark <robin.clark@oss.qualcomm.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>

v1->v8: none
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c  | 1 +
 drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 1 +
 drivers/gpu/drm/bridge/nwl-dsi.c                    | 1 +
 drivers/gpu/drm/bridge/samsung-dsim.c               | 1 +
 drivers/gpu/drm/msm/dp/dp_aux.c                     | 1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c              | 1 +
 6 files changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 8dee5f2fbde5..4ee08663e626 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include <drm/bridge/analogix_dp.h>
 #include <drm/drm_atomic.h>
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 064c6915c896..d20c0f8ad04c 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -32,6 +32,7 @@
 #include <linux/phy/phy.h>
 #include <linux/phy/phy-dp.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/wait.h>
 
diff --git a/drivers/gpu/drm/bridge/nwl-dsi.c b/drivers/gpu/drm/bridge/nwl-dsi.c
index 2f7429b24fc2..9ac8796ae91e 100644
--- a/drivers/gpu/drm/bridge/nwl-dsi.c
+++ b/drivers/gpu/drm/bridge/nwl-dsi.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/sys_soc.h>
diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index c3eb437ef1b0..4244434747af 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/units.h>
 
 #include <video/mipi_display.h>
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index 3825a2fb48e2..5ee22f88bd28 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -6,6 +6,7 @@
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
 #include <drm/drm_print.h>
 
 #include "dp_reg.h"
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 177e30445ee8..68556daa54ae 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -10,6 +10,7 @@
 #include <linux/firmware.h>
 #include <linux/mfd/syscon.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-- 
2.34.1

[PATCH v8 phy-next 06/31] phy: add <linux/pm_runtime.h> where missing

[Vladimir Oltean]

It appears that a number of PHY provider drivers call runtime PM
operations without including the proper header.

This was provided by <linux/phy/phy.h> but no function exported by this
header directly needs it. So we need to drop it from there, and fix up
drivers that used to depend on that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Reviewed-by: André Draszik <andre.draszik@linaro.org> # google
---
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: "André Draszik" <andre.draszik@linaro.org>
Cc: Tudor Ambarus <tudor.ambarus@linaro.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>

v7->v8:
- stop listing the PHY drivers which need to be changed. The list
  was incomplete; not listing 12 drivers. Flagged by Sashiko:
  https://sashiko.dev/#/patchset/20260430110652.558622-1-vladimir.oltean@nxp.com
v2->v7: none
v1->v2: collect tags
---
 drivers/phy/motorola/phy-mapphone-mdm6600.c    | 1 +
 drivers/phy/phy-google-usb.c                   | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c      | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c        | 1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c       | 1 +
 drivers/phy/qualcomm/phy-qcom-qusb2.c          | 1 +
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c  | 1 +
 drivers/phy/renesas/phy-rcar-gen3-pcie.c       | 1 +
 drivers/phy/renesas/r8a779f0-ether-serdes.c    | 1 +
 drivers/phy/rockchip/phy-rockchip-typec.c      | 1 +
 drivers/phy/ti/phy-tusb1210.c                  | 1 +
 12 files changed, 12 insertions(+)

diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index fd0e0cd1c1cf..ce1dad8c438d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -17,6 +17,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
 
 #define PHY_MDM6600_PHY_DELAY_MS	4000	/* PHY enable 2.2s to 3.5s */
 #define PHY_MDM6600_ENABLED_DELAY_MS	8000	/* 8s more total for MDM6600 */
diff --git a/drivers/phy/phy-google-usb.c b/drivers/phy/phy-google-usb.c
index ab20bc20f19e..48cfa2e28347 100644
--- a/drivers/phy/phy-google-usb.c
+++ b/drivers/phy/phy-google-usb.c
@@ -16,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/usb/typec_mux.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 93f1aa10d400..b9ea7d058e93 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -16,6 +16,7 @@
 #include <linux/of_graph.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index 8bf951b0490c..2bd5862c5ba8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index b0ecd5ba2464..d88b8a415e85 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -15,6 +15,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index c342479a3798..f62e1f6ecc07 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -16,6 +16,7 @@
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index eb93015be841..191040f6d60f 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -14,6 +14,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index eb0b0f61d98e..8915fa250e81 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
index c0e5a4ac82de..3e2cf59ad480 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -11,6 +11,7 @@
 #include <linux/of.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/spinlock.h>
 
 #define PHY_CTRL		0x4000		/* R8A77980 only */
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
index 8a6b6f366fe3..c34427ac4fdb 100644
--- a/drivers/phy/renesas/r8a779f0-ether-serdes.c
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -12,6 +12,7 @@
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
 #define R8A779F0_ETH_SERDES_NUM			3
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..0a318ccf1bbf 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -49,6 +49,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index c3ae9d7948d7..b7080403e649 100644
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -13,6 +13,7 @@
 #include <linux/ulpi/regs.h>
 #include <linux/gpio/consumer.h>
 #include <linux/phy/ulpi_phy.h>
+#include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
 #include <linux/property.h>
 #include <linux/workqueue.h>
-- 
2.34.1

[PATCH v8 phy-next 07/31] phy: spacemit: include missing <linux/phy/phy.h>

[Vladimir Oltean]

This driver relies on a transitive inclusion of the PHY API header
through the USB headers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
---
Cc: Yixun Lan <dlan@kernel.org>

v5->v8: none
v4->v5: collect tag
v1->v4: none
---
 drivers/phy/spacemit/phy-k1-usb2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 9215d0b223b2..01af310d6683 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -9,6 +9,7 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
-- 
2.34.1

[PATCH v8 phy-next 08/31] net: lan969x: include missing <linux/of.h>

[Vladimir Oltean]

This file is calling of_property_read_u32() without including the proper
header for it. It is provided by <linux/phy/phy.h>, which wants to get
rid of it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
---
Cc: Daniel Machon <daniel.machon@microchip.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>

v2->v8: none
v1->v2: collect tag
---
 drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c b/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
index 4e422ca50828..249114b40c42 100644
--- a/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
+++ b/drivers/net/ethernet/microchip/sparx5/lan969x/lan969x_rgmii.c
@@ -4,6 +4,7 @@
  * Copyright (c) 2024 Microchip Technology Inc. and its subsidiaries.
  */
 
+#include <linux/of.h>
 #include "lan969x.h"
 
 /* Tx clock selectors */
-- 
2.34.1

[PATCH v8 phy-next 09/31] PCI: Remove device links to PHY

[Vladimir Oltean]

This is practically a full revert of commit
7a4db656a635 ("PCI: dra7xx: Create functional dependency between PCIe and PHY")
and a partial revert of the device link pieces from commits
dfb80534692d ("PCI: cadence: Add generic PHY support to host and EP drivers")
49229238ab47 ("PCI: keystone: Cleanup PHY handling")

The trouble with these commits is that they dereference fields inside
struct phy from a consumer driver, which will become no longer possible.

Since commit 987351e1ea77 ("phy: core: Add consumer device link
support") from 2019, the PHY core also adds a device link to order PHY
provider and consumer suspend/resume operations. All reverted commits
are from 2017-2018, and what they do should actually be redundant now.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
---
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Siddharth Vadapalli <s-vadapalli@ti.com>

v7->v8: only context change - "return 0" became "return ret" for
        cdns_plat_pcie_probe()
v6->v7: none
v5->v6: collect tag from Manivannan Sadhasivam
v3->v5: none
v2->v3:
- remove dangling set but unused phy_count local variable in
  cdns_plat_pcie_probe()
v1->v2:
- fully remove struct device link **link from struct cdns_pcie and from
  cdns_plat_pcie_probe() error path
- collect tag from Bjorn Helgaas
- adjust commit title
---
 .../controller/cadence/pcie-cadence-plat.c    |  4 ---
 drivers/pci/controller/cadence/pcie-cadence.c | 16 +---------
 drivers/pci/controller/cadence/pcie-cadence.h |  2 --
 drivers/pci/controller/dwc/pci-dra7xx.c       | 16 ----------
 drivers/pci/controller/dwc/pci-keystone.c     | 31 +++----------------
 5 files changed, 5 insertions(+), 64 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-plat.c b/drivers/pci/controller/cadence/pcie-cadence-plat.c
index 8b12a46b5601..6fd16e09e244 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-plat.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-plat.c
@@ -41,7 +41,6 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 	struct pci_host_bridge *bridge;
 	struct cdns_pcie_ep *ep;
 	struct cdns_pcie_rc *rc;
-	int phy_count;
 	bool is_rc;
 	int ret;
 
@@ -122,9 +121,6 @@ static int cdns_plat_pcie_probe(struct platform_device *pdev)
 	pm_runtime_put_sync(dev);
 	pm_runtime_disable(dev);
 	cdns_pcie_disable_phy(cdns_plat_pcie->pcie);
-	phy_count = cdns_plat_pcie->pcie->phy_count;
-	while (phy_count--)
-		device_link_del(cdns_plat_pcie->pcie->link[phy_count]);
 
 	return ret;
 }
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index a1eada56edba..0ac980249941 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -222,7 +222,6 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 	struct device_node *np = dev->of_node;
 	int phy_count;
 	struct phy **phy;
-	struct device_link **link;
 	int i;
 	int ret;
 	const char *name;
@@ -238,10 +237,6 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 	if (!phy)
 		return -ENOMEM;
 
-	link = devm_kcalloc(dev, phy_count, sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	for (i = 0; i < phy_count; i++) {
 		of_property_read_string_index(np, "phy-names", i, &name);
 		phy[i] = devm_phy_get(dev, name);
@@ -249,17 +244,10 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 			ret = PTR_ERR(phy[i]);
 			goto err_phy;
 		}
-		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
-		if (!link[i]) {
-			devm_phy_put(dev, phy[i]);
-			ret = -EINVAL;
-			goto err_phy;
-		}
 	}
 
 	pcie->phy_count = phy_count;
 	pcie->phy = phy;
-	pcie->link = link;
 
 	ret =  cdns_pcie_enable_phy(pcie);
 	if (ret)
@@ -268,10 +256,8 @@ int cdns_pcie_init_phy(struct device *dev, struct cdns_pcie *pcie)
 	return 0;
 
 err_phy:
-	while (--i >= 0) {
-		device_link_del(link[i]);
+	while (--i >= 0)
 		devm_phy_put(dev, phy[i]);
-	}
 
 	return ret;
 }
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 574e9cf4d003..232b504b5cf9 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -82,7 +82,6 @@ struct cdns_plat_pcie_of_data {
  * @is_rc: tell whether the PCIe controller mode is Root Complex or Endpoint.
  * @phy_count: number of supported PHY devices
  * @phy: list of pointers to specific PHY control blocks
- * @link: list of pointers to corresponding device link representations
  * @ops: Platform-specific ops to control various inputs from Cadence PCIe
  *       wrapper
  * @cdns_pcie_reg_offsets: Register bank offsets for different SoC
@@ -95,7 +94,6 @@ struct cdns_pcie {
 	bool			             is_rc;
 	int			             phy_count;
 	struct phy		             **phy;
-	struct device_link	             **link;
 	const  struct cdns_pcie_ops          *ops;
 	const  struct cdns_plat_pcie_of_data *cdns_pcie_reg_offsets;
 };
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index cd904659c321..9c1aef4d0bd1 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -9,7 +9,6 @@
 
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -679,7 +678,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	int i;
 	int phy_count;
 	struct phy **phy;
-	struct device_link **link;
 	void __iomem *base;
 	struct dw_pcie *pci;
 	struct dra7xx_pcie *dra7xx;
@@ -727,10 +725,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
-	link = devm_kcalloc(dev, phy_count, sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	dra7xx->clk = devm_clk_get_optional(dev, NULL);
 	if (IS_ERR(dra7xx->clk))
 		return dev_err_probe(dev, PTR_ERR(dra7xx->clk),
@@ -745,12 +739,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 		phy[i] = devm_phy_get(dev, name);
 		if (IS_ERR(phy[i]))
 			return PTR_ERR(phy[i]);
-
-		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
-		if (!link[i]) {
-			ret = -EINVAL;
-			goto err_link;
-		}
 	}
 
 	dra7xx->base = base;
@@ -852,10 +840,6 @@ static int dra7xx_pcie_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	dra7xx_pcie_disable_phy(dra7xx);
 
-err_link:
-	while (--i >= 0)
-		device_link_del(link[i]);
-
 	return ret;
 }
 
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index fe4836925c4e..cab9fad212ad 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -130,7 +130,6 @@ struct keystone_pcie {
 	int			num_lanes;
 	u32			num_viewport;
 	struct phy		**phy;
-	struct device_link	**link;
 	struct			device_node *msi_intc_np;
 	struct irq_domain	*intx_irq_domain;
 	struct device_node	*np;
@@ -1130,7 +1129,6 @@ static int ks_pcie_probe(struct platform_device *pdev)
 	enum dw_pcie_device_mode mode;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct device_link **link;
 	struct gpio_desc *gpiod;
 	struct resource *res;
 	void __iomem *base;
@@ -1201,31 +1199,17 @@ static int ks_pcie_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
-	link = devm_kcalloc(dev, num_lanes, sizeof(*link), GFP_KERNEL);
-	if (!link)
-		return -ENOMEM;
-
 	for (i = 0; i < num_lanes; i++) {
 		snprintf(name, sizeof(name), "pcie-phy%d", i);
 		phy[i] = devm_phy_optional_get(dev, name);
 		if (IS_ERR(phy[i])) {
 			ret = PTR_ERR(phy[i]);
-			goto err_link;
-		}
-
-		if (!phy[i])
-			continue;
-
-		link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
-		if (!link[i]) {
-			ret = -EINVAL;
-			goto err_link;
+			goto err;
 		}
 	}
 
 	ks_pcie->np = np;
 	ks_pcie->pci = pci;
-	ks_pcie->link = link;
 	ks_pcie->num_lanes = num_lanes;
 	ks_pcie->phy = phy;
 
@@ -1235,7 +1219,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
 		ret = PTR_ERR(gpiod);
 		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Failed to get reset GPIO\n");
-		goto err_link;
+		goto err;
 	}
 
 	/* Obtain references to the PHYs */
@@ -1250,7 +1234,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
 
 	if (ret) {
 		dev_err(dev, "failed to enable phy\n");
-		goto err_link;
+		goto err;
 	}
 
 	platform_set_drvdata(pdev, ks_pcie);
@@ -1337,25 +1321,18 @@ static int ks_pcie_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 	ks_pcie_disable_phy(ks_pcie);
 
-err_link:
-	while (--i >= 0 && link[i])
-		device_link_del(link[i]);
-
+err:
 	return ret;
 }
 
 static void ks_pcie_remove(struct platform_device *pdev)
 {
 	struct keystone_pcie *ks_pcie = platform_get_drvdata(pdev);
-	struct device_link **link = ks_pcie->link;
-	int num_lanes = ks_pcie->num_lanes;
 	struct device *dev = &pdev->dev;
 
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
 	ks_pcie_disable_phy(ks_pcie);
-	while (num_lanes--)
-		device_link_del(link[num_lanes]);
 }
 
 static struct platform_driver ks_pcie_driver = {
-- 
2.34.1

[PATCH v8 phy-next 10/31] scsi: ufs: exynos: use dedicated API for updating PHY bus width

[Vladimir Oltean]

I am trying to get rid of code instances where PHY consumers (like the
Exynos UFS HCD) poke inside struct phy fields, in order to further turn
struct phy into an opaque data structure.

The ufs-exynos.c driver interacts with phy-samsung-ufs.c in order to
power it on and to update the lane count. For the later purpose, it
(ab)uses phy_set_bus_width().

The phy_set_bus_width() function is a PHY provider function, not a
consumer one, and I am calling its use from ufs-exynos.c an abuse
because
(1) commit 8feed347d33b ("phy: add phy_get_bus_width()/phy_set_bus_width()
    calls") clearly states the intended use.
(2) phy_set_bus_width() only alters phy->attrs.bus_width, and does not
    call into phy_ops at all. So a consumer that makes a call to
    phy_set_bus_width() can not possibly produce any hardware change in
    the provider at all.

This is where the Exynos UFS HCD driver decided to be creative and
hijacked phy_init() to pick up the change of the bus_width attribute.

This requires a very careful dance where the PHY consumer needs to
simultaneously juggle multiple requirements:
- the UFS PHY needs to pick up the updated lane count in its
  samsung_ufs_phy_init() handler for the phy_init() call
- phy_init() calls need to be balanced with phy_exit(), otherwise
  subsequent phy_init() calls don't make it into samsung_ufs_phy_init()
  and just leave the PHY with an elevated init_count
- phy_power_on() can't be called without phy_init()

The difficulty to observe all requirements is why the following bug fix
commits exist:
3d73b200f989 ("scsi: ufs: ufs-exynos: Change ufs phy control sequence")
7f05fd9a3b6f ("scsi: ufs: exynos: Ensure consistent phy reference counts")

Currently the UFS HCD driver tries to keep the PHY init_count and
power_count in tight lockstep, but even this is error-prone. For
example, if exynos_ufs_suspend() runs and then exynos_ufs_exit(),
the PHY power_count will underflow.

If we address the root issue first (phy_init() abused to pick up new
lane count) by introducing a new PHY consumer method which actually does
call into the PHY provider driver, then we are able to absorb the entire
UFS HCD dance and update the lane count without altering the PHY
init_count or power_count.

This allows more consumer flexibility to call phy_init() from other
places, and same goes for phy_power_on().

It is common practice to call phy_init() only once, right after
phy_get(), and doing so will naturally balance it with phy_exit().

We can also leave the phy_power_on() call to be on demand, placed inside
exynos_ufs_pre_link(). But the UFS core (specifically ufshcd_link_startup())
may call the variant operation exynos_ufs_pre_link() -> exynos_ufs_phy_init()
multiple times if the link startup fails and needs to be retried.

For this reason we need a consumer-specific "bool phy_powered_on" which
ensures that we call phy_power_on() at most once, and that
exynos_ufs_exit() only calls phy_power_off() if phy_power_on() was
previously called. Using the phy->power_count for this purpose is
undesirable because it is going away, and the PHY API is not offering a
helper for it (would be a foot gun, because multiple consumers of the
same provider shouldn't interfere with each other; each should only undo
the effects of what it did itself)

Inside the new samsung_ufs_phy_request_bus_width(), I've sanity checked
that the bus width is either 1 or 2 lanes. This coincides with
samsung_ufs_phy_config() which only configures LANE_0 and LANE_1.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Chanho Park <chanho61.park@samsung.com>

v7->v8:
- rewrote commit after Sashiko pointed out the new handling is still
  not correct:
  https://sashiko.dev/#/patchset/20260430110652.558622-1-vladimir.oltean@nxp.com
- removed Reviewed-by, Tested-by and Acked-by tags from Alim, Bart and
  Peter
v6->v7: collect tags from Martin and Peter
v5->v6: collect tags from Alim Akhtar
v4->v5: collect tag, add "scsi: " prefix to commit title
v3->v4: none
v2->v3:
- add Cc Chanho Park, author of commit 3d73b200f989 ("scsi: ufs:
  ufs-exynos: Change ufs phy control sequence")
v1->v2:
- add better ufs->phy_powered_on handling in exynos_ufs_exit(),
  exynos_ufs_suspend() and exynos_ufs_resume() which ensures we won't
  enter a phy->power_count underrun condition
---
 drivers/phy/phy-core.c                |  35 ++++++++
 drivers/phy/samsung/phy-samsung-ufs.c |  27 +++++-
 drivers/ufs/host/ufs-exynos.c         | 114 ++++++++++++++++++--------
 drivers/ufs/host/ufs-exynos.h         |   1 +
 include/linux/phy/phy.h               |  11 +++
 5 files changed, 151 insertions(+), 37 deletions(-)

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 21aaf2f76e53..634ac07fd1f3 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -606,6 +606,41 @@ int phy_validate(struct phy *phy, enum phy_mode mode, int submode,
 }
 EXPORT_SYMBOL_GPL(phy_validate);
 
+/**
+ * phy_request_bus_width() - request PHY to change its bus width
+ * @phy: the phy returned by phy_get()
+ * @bus_width: new bus width
+ *
+ * Consumers can use this method to request the PHY to update itself to a new
+ * bus width (typically meaning lane count). Can be called from any init state
+ * and power state. PHY is expected to use the new lane count as soon as this
+ * method returns.
+ *
+ * Returns: 0 if successful or if operating on an optional and absent PHY,
+ *	-EOPNOTSUPP if the operation is not implemented, -EINVAL if the
+ *	requested bus width is not supported, other negative error codes for
+ *	driver-specific failures.
+ */
+int phy_request_bus_width(struct phy *phy, int bus_width)
+{
+	int ret;
+
+	if (!phy)
+		return 0;
+
+	if (!phy->ops->request_bus_width)
+		return -EOPNOTSUPP;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->request_bus_width(phy, bus_width);
+	if (!ret)
+		phy_set_bus_width(phy, bus_width);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_request_bus_width);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index ee665f26c236..b09a35ab6acd 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -165,7 +165,6 @@ static int samsung_ufs_phy_init(struct phy *phy)
 {
 	struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
 
-	ss_phy->lane_cnt = phy->attrs.bus_width;
 	ss_phy->ufs_phy_state = CFG_PRE_INIT;
 
 	return 0;
@@ -204,6 +203,31 @@ static int samsung_ufs_phy_power_off(struct phy *phy)
 	return 0;
 }
 
+static int samsung_ufs_phy_request_bus_width(struct phy *phy, int bus_width)
+{
+	struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+	u8 old_lane_cnt = ss_phy->lane_cnt;
+	int err = 0;
+
+	if (bus_width != 1 && bus_width != 2)
+		return -EINVAL;
+
+	ss_phy->lane_cnt = bus_width;
+
+	if (phy->init_count)
+		samsung_ufs_phy_init(phy);
+
+	/* If the init_count is 0, the power_count should also be 0 */
+	if (phy->power_count) {
+		samsung_ufs_phy_power_off(phy);
+		err = samsung_ufs_phy_power_on(phy);
+		if (err)
+			ss_phy->lane_cnt = old_lane_cnt;
+	}
+
+	return err;
+}
+
 static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
 				    enum phy_mode mode, int submode)
 {
@@ -272,6 +296,7 @@ static const struct phy_ops samsung_ufs_phy_ops = {
 	.calibrate	= samsung_ufs_phy_calibrate,
 	.set_mode	= samsung_ufs_phy_set_mode,
 	.notify_phystate = samsung_ufs_phy_notify_state,
+	.request_bus_width = samsung_ufs_phy_request_bus_width,
 	.owner          = THIS_MODULE,
 };
 
diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index 77a6c8e44485..b90876b268db 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -931,11 +931,73 @@ static void exynos_ufs_specify_nexus_t_tm_req(struct ufs_hba *hba,
 	}
 }
 
-static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
+static int exynos_ufs_phy_init(struct device *dev, struct exynos_ufs *ufs)
+{
+	struct phy *generic_phy;
+	int ret;
+
+	generic_phy = devm_phy_get(dev, "ufs-phy");
+	if (IS_ERR(generic_phy)) {
+		ret = PTR_ERR(generic_phy);
+		dev_err(dev, "failed to get ufs-phy: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	ret = phy_init(generic_phy);
+	if (ret) {
+		dev_err(dev, "phy init failed: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	ufs->phy = generic_phy;
+
+	return ret;
+}
+
+static void exynos_ufs_phy_exit(struct exynos_ufs *ufs)
+{
+	phy_exit(ufs->phy);
+}
+
+static int exynos_ufs_phy_power_on(struct exynos_ufs *ufs)
+{
+	int ret;
+
+	if (ufs->phy_powered_on)
+		return 0;
+
+	ret = phy_power_on(ufs->phy);
+	if (ret) {
+		dev_err(ufs->hba->dev, "Failed to power on PHY: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	ufs->phy_powered_on = true;
+
+	return 0;
+}
+
+static void exynos_ufs_phy_power_off(struct exynos_ufs *ufs)
+{
+	int ret;
+
+	if (!ufs->phy_powered_on)
+		return;
+
+	ret = phy_power_off(ufs->phy);
+	if (ret)
+		dev_warn(ufs->hba->dev, "Failed to power off PHY: %pe\n",
+			 ERR_PTR(ret));
+
+	ufs->phy_powered_on = false;
+}
+
+static int exynos_ufs_phy_update_bus_width(struct exynos_ufs *ufs)
 {
 	struct ufs_hba *hba = ufs->hba;
 	struct phy *generic_phy = ufs->phy;
-	int ret = 0;
+	int ret;
 
 	if (ufs->avail_ln_rx == 0 || ufs->avail_ln_tx == 0) {
 		ufshcd_dme_get(hba, UIC_ARG_MIB(PA_AVAILRXDATALANES),
@@ -947,30 +1009,11 @@ static int exynos_ufs_phy_init(struct exynos_ufs *ufs)
 			ufs->avail_ln_rx, ufs->avail_ln_tx);
 	}
 
-	phy_set_bus_width(generic_phy, ufs->avail_ln_rx);
-
-	if (generic_phy->power_count) {
-		phy_power_off(generic_phy);
-		phy_exit(generic_phy);
-	}
-
-	ret = phy_init(generic_phy);
-	if (ret) {
-		dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
-			__func__, ret);
-		return ret;
-	}
-
-	ret = phy_power_on(generic_phy);
+	ret = phy_request_bus_width(generic_phy, ufs->avail_ln_rx);
 	if (ret)
-		goto out_exit_phy;
-
-	return 0;
-
-out_exit_phy:
-	phy_exit(generic_phy);
+		return ret;
 
-	return ret;
+	return exynos_ufs_phy_power_on(ufs);
 }
 
 static void exynos_ufs_config_unipro(struct exynos_ufs *ufs)
@@ -1055,7 +1098,7 @@ static int exynos_ufs_pre_link(struct ufs_hba *hba)
 		ufs->drv_data->pre_link(ufs);
 
 	/* m-phy */
-	exynos_ufs_phy_init(ufs);
+	exynos_ufs_phy_update_bus_width(ufs);
 	if (!(ufs->opts & EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR)) {
 		exynos_ufs_config_phy_time_attr(ufs);
 		exynos_ufs_config_phy_cap_attr(ufs);
@@ -1475,12 +1518,9 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 		goto out;
 	}
 
-	ufs->phy = devm_phy_get(dev, "ufs-phy");
-	if (IS_ERR(ufs->phy)) {
-		ret = PTR_ERR(ufs->phy);
-		dev_err(dev, "failed to get ufs-phy\n");
+	ret = exynos_ufs_phy_init(dev, ufs);
+	if (ret)
 		goto out;
-	}
 
 	exynos_ufs_priv_init(hba, ufs);
 
@@ -1490,13 +1530,13 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 		ret = ufs->drv_data->drv_init(ufs);
 		if (ret) {
 			dev_err(dev, "failed to init drv-data\n");
-			goto out;
+			goto out_phy_exit;
 		}
 	}
 
 	ret = exynos_ufs_get_clk_info(ufs);
 	if (ret)
-		goto out;
+		goto out_phy_exit;
 	exynos_ufs_specify_phy_time_attr(ufs);
 
 	exynos_ufs_config_smu(ufs);
@@ -1504,6 +1544,8 @@ static int exynos_ufs_init(struct ufs_hba *hba)
 	hba->host->dma_alignment = DATA_UNIT_SIZE - 1;
 	return 0;
 
+out_phy_exit:
+	exynos_ufs_phy_exit(ufs);
 out:
 	hba->priv = NULL;
 	return ret;
@@ -1513,8 +1555,8 @@ static void exynos_ufs_exit(struct ufs_hba *hba)
 {
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
 
-	phy_power_off(ufs->phy);
-	phy_exit(ufs->phy);
+	exynos_ufs_phy_power_off(ufs);
+	exynos_ufs_phy_exit(ufs);
 }
 
 static int exynos_ufs_host_reset(struct ufs_hba *hba)
@@ -1728,7 +1770,7 @@ static int exynos_ufs_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
 		ufs->drv_data->suspend(ufs);
 
 	if (!ufshcd_is_link_active(hba))
-		phy_power_off(ufs->phy);
+		exynos_ufs_phy_power_off(ufs);
 
 	return 0;
 }
@@ -1738,7 +1780,7 @@ static int exynos_ufs_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	struct exynos_ufs *ufs = ufshcd_get_variant(hba);
 
 	if (!ufshcd_is_link_active(hba))
-		phy_power_on(ufs->phy);
+		exynos_ufs_phy_power_on(ufs);
 
 	exynos_ufs_config_smu(ufs);
 	exynos_ufs_fmp_resume(hba);
diff --git a/drivers/ufs/host/ufs-exynos.h b/drivers/ufs/host/ufs-exynos.h
index abe7e472759e..683b9150e2ba 100644
--- a/drivers/ufs/host/ufs-exynos.h
+++ b/drivers/ufs/host/ufs-exynos.h
@@ -227,6 +227,7 @@ struct exynos_ufs {
 	int avail_ln_rx;
 	int avail_ln_tx;
 	int rx_sel_idx;
+	bool phy_powered_on;
 	struct ufs_pa_layer_attr dev_req_params;
 	struct ufs_phy_time_cfg t_cfg;
 	ktime_t entry_hibern8_t;
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index ea47975e288a..01af84f97608 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -93,6 +93,7 @@ union phy_configure_opts {
  * @reset: resetting the phy
  * @calibrate: calibrate the phy
  * @notify_phystate: notify and configure the phy for a particular state
+ * @request_bus_width: request a different bus width for the phy
  * @release: ops to be performed while the consumer relinquishes the PHY
  * @owner: the module owner containing the ops
  */
@@ -143,6 +144,7 @@ struct phy_ops {
 	int	(*disconnect)(struct phy *phy, int port);
 
 	int	(*notify_phystate)(struct phy *phy, union phy_notify state);
+	int	(*request_bus_width)(struct phy *phy, int bus_width);
 	void	(*release)(struct phy *phy);
 	struct module *owner;
 };
@@ -275,6 +277,7 @@ static inline void phy_set_bus_width(struct phy *phy, int bus_width)
 {
 	phy->attrs.bus_width = bus_width;
 }
+int phy_request_bus_width(struct phy *phy, int bus_width);
 struct phy *phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
 struct phy *devm_phy_optional_get(struct device *dev, const char *string);
@@ -456,6 +459,14 @@ static inline void phy_set_bus_width(struct phy *phy, int bus_width)
 	return;
 }
 
+static inline int phy_request_bus_width(struct phy *phy, int bus_width)
+{
+	if (!phy)
+		return 0;
+
+	return -ENOSYS;
+}
+
 static inline struct phy *phy_get(struct device *dev, const char *string)
 {
 	return ERR_PTR(-ENOSYS);
-- 
2.34.1

[PATCH v8 phy-next 11/31] scsi: ufs: qcom: call phy_init() before phy_power_on()

[Vladimir Oltean]

The Qualcomm UFS host controller interacts with the QMP PHY in a way
which violates the Generic PHY API expectation, documented in section
"Order of API calls" from Documentation/driver-api/phy/phy.rst, and then
tries to hide it.

Namely, calls must be made in the phy_init() -> phy_power_on() ->
phy_power_off() -> phy_exit() sequence.

What we actually have is:

ufshcd_init()
-> ufshcd_hba_init()
   -> ufshcd_setup_clocks(hba, true)
      -> ufshcd_vops_setup_clocks(hba, true, POST_CHANGE)
         -> ufs_qcom_setup_clocks(hba, true, POST_CHANGE)
            -> ufs_qcom_init() has not run, simply ignore
   -> ufshcd_variant_hba_init()
      -> ufs_qcom_init()
         -> ufs_qcom_setup_clocks(hba, true, POST_CHANGE)
            -> phy_power_on(phy)
-> ufshcd_hba_enable()
   -> ufshcd_vops_hce_enable_notify()
      -> ufs_qcom_hce_enable_notify()
         -> ufs_qcom_power_up_sequence()
            -> if (phy->power_count) phy_power_off(phy)
            -> phy_init(phy)

This "works" because the way that the "phy_power_on was called before
phy_init\n" warning condition is detected in phy-core.c is if the
power_count is positive at the phy_init() call time.

By having that "if (phy->power_count) phy_power_off(phy)" logic, the
ufs-qcom.c technically sidesteps the test, but actually violates the
Generic PHY API even more (calls phy_power_on() *and* phy_power_off()
before phy_init()).

The reason why I stumbled upon this was that I was trying to remove
dereferences of phy->power_count (a PHY internal field) from consumer
drivers.

phy_init(), implemented as qmp_ufs_phy_init(), calls qmp->ufs_reset =
devm_reset_control_get_exclusive(), so my understanding is that it needs
to be called:
- no earlier than ufs_qcom_init() -> devm_reset_controller_register()
  which makes qmp->ufs_reset available
- no later than ufs_qcom_power_up_sequence() -> phy_calibrate() ->
  qmp_ufs_phy_calibrate() where the qmp->ufs_reset is needed; although
  phy_init() should be the first PHY API call made.

The only mystery is why is the current phy_init() placement so late, in
ufs_qcom_power_up_sequence(), but I guess the answer is that the
placement is vestigial. After the incremental work of commit
c9b589791fc1 ("phy: qcom: Utilize UFS reset controller") from
Evan Green and commit cbfd6c124f27 ("phy: qcom-qmp-ufs: Refactor
phy_power_on and phy_calibrate callbacks") from Nitin Rawat, the entire
multi-stage PHY init procedure was moved to phy_power_on(), but nobody
bothered to move phy_init() anywhere else more natural.

So hopefully if the calculations are right, any placement within that
bounding box should be good, and I'm picking the new phy_init() location
to be in ufs_qcom_init().

Even with phy_init() out of the way, ufs_qcom_power_up_sequence() ->
phy_power_off() is still needed, for a separate reason which will be
dealt with separately.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>

v7->v8: patch is new
Commit was previously posted here but did not get any testing.
https://lore.kernel.org/linux-phy/20260327112858.r5lpqygtvsane2vf@skbuf/
---
 drivers/ufs/host/ufs-qcom.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index bc037db46624..9039b087bf21 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -513,13 +513,6 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 
 
 	/* phy initialization - calibrate the phy */
-	ret = phy_init(phy);
-	if (ret) {
-		dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
-			__func__, ret);
-		return ret;
-	}
-
 	ret = phy_set_mode_ext(phy, mode, host->phy_gear);
 	if (ret)
 		goto out_disable_phy;
@@ -529,23 +522,18 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	if (ret) {
 		dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
 			__func__, ret);
-		goto out_disable_phy;
+		return ret;
 	}
 
 	ret = phy_calibrate(phy);
 	if (ret) {
 		dev_err(hba->dev, "Failed to calibrate PHY: %d\n", ret);
-		goto out_disable_phy;
+		return ret;
 	}
 
 	ufs_qcom_select_unipro_mode(host);
 
 	return 0;
-
-out_disable_phy:
-	phy_exit(phy);
-
-	return ret;
 }
 
 /*
@@ -1625,6 +1613,12 @@ static int ufs_qcom_init(struct ufs_hba *hba)
 	if (err)
 		goto out_variant_clear;
 
+	err = phy_init(host->generic_phy);
+	if (err) {
+		dev_err(hba->dev, "phy_init failed: %pe\n", ERR_PTR(err));
+		goto out_variant_clear;
+	}
+
 	ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
 
 	ufs_qcom_get_default_testbus_cfg(host);
-- 
2.34.1

[PATCH v8 phy-next 12/31] scsi: ufs: qcom: make use of QMP PHY dynamic gear switching ability

[Vladimir Oltean]

Currently, phy_set_mode_ext() on the QMP UFS PHY makes no change to the
hardware state, instead it is mandatory that phy_power_on() followed by
phy_calibrate() be run afterwards, for the new mode to be picked up.

By absorbing the phy_power_off() -> ... -> phy_power_on() ->
phy_calibrate() surrounding sequence into phy_set_mode_ext(), the UFS
HCD consumer driver can be greatly simplified, and we also have a proper
self-standing phy_set_mode_ext() implementation which does not rely on
other calls to do its job.

So simplify ufs_qcom_power_up_sequence() to only call phy_set_mode_ext()
and let PHY power management be handled just by ufs_qcom_setup_clocks().
Actually, after this change, ufs_qcom_power_up_sequence() becomes an
inadequate name, since from the consumer perspective the powering up is
invisible. So change it to ufs_qcom_phy_change_mode().

The consumer and the provider are modified at once because ufs-qcom.c
already calls phy_set_mode_ext() while the QMP PHY is powered on, so
introducing the extra logic in qmp_ufs_set_mode() would cause a
potentially breaking second QMP PHY power sequence until the consumer is
patched to remove its own calls.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Can Guo <quic_cang@quicinc.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>

v7->v8: patch is new
Commit was previously posted here but did not get any testing.
https://lore.kernel.org/linux-phy/20260327112858.r5lpqygtvsane2vf@skbuf/

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c |  6 ++++++
 drivers/ufs/host/ufs-qcom.c             | 25 +++++--------------------
 2 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 771bc7c2ab50..e4e7966eb39a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -2012,6 +2012,12 @@ static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode)
 	qmp->mode = mode;
 	qmp->submode = submode;
 
+	if (phy->power_count) {
+		qmp_ufs_power_off(phy);
+		qmp_ufs_power_on(phy);
+		return qmp_ufs_phy_calibrate(phy);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 9039b087bf21..e28edcfd13a1 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -485,7 +485,7 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba)
 	return UFS_HS_G3;
 }
 
-static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
+static int ufs_qcom_phy_change_mode(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 	struct ufs_host_params *host_params = &host->host_params;
@@ -508,26 +508,11 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
 	if (ret)
 		return ret;
 
-	if (phy->power_count)
-		phy_power_off(phy);
-
-
-	/* phy initialization - calibrate the phy */
 	ret = phy_set_mode_ext(phy, mode, host->phy_gear);
-	if (ret)
-		goto out_disable_phy;
-
-	/* power on phy - start serdes and phy's power and clocks */
-	ret = phy_power_on(phy);
-	if (ret) {
-		dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
-			__func__, ret);
-		return ret;
-	}
-
-	ret = phy_calibrate(phy);
 	if (ret) {
-		dev_err(hba->dev, "Failed to calibrate PHY: %d\n", ret);
+		dev_err(hba->dev,
+			"Failed to change PHY mode %d submode %d: %pe\n",
+			mode, host->phy_gear, ERR_PTR(ret));
 		return ret;
 	}
 
@@ -582,7 +567,7 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
 
 	switch (status) {
 	case PRE_CHANGE:
-		err = ufs_qcom_power_up_sequence(hba);
+		err = ufs_qcom_phy_change_mode(hba);
 		if (err)
 			return err;
 
-- 
2.34.1

[PATCH v8 phy-next 13/31] scsi: ufs: qcom: keep separate track of PHY power state

[Vladimir Oltean]

The Generic PHY API needs the following call order:
phy_init() -> phy_power_on() -> phy_power_off() -> phy_exit()
with a balanced number of phy_init() <-> phy_exit() and
phy_power_on() <-> phy_power_off() calls.

The UFS framework is not exactly great in helping out with obeying these
requirements. For example, the Qualcomm UFS HCD driver insists pairing
the PHY power to the clock setup operations. But during driver removal,
we have:

ufshcd_hba_exit()
-> ufshcd_variant_hba_exit()
   -> ufs_qcom_exit()
-> ufshcd_setup_clocks(hba, false)

which means that we will underflow the PHY power_count.

Adding a "bool power_count" to the driver and checking it before each
call helps avoid this issue.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Can Guo <quic_cang@quicinc.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>

v7->v8: patch is new to fix an issue reported by Sashiko
https://sashiko.dev/#/patchset/20260430110652.558622-1-vladimir.oltean@nxp.com
---
 drivers/ufs/host/ufs-qcom.c | 53 ++++++++++++++++++++++++++++---------
 drivers/ufs/host/ufs-qcom.h |  1 +
 2 files changed, 41 insertions(+), 13 deletions(-)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index e28edcfd13a1..c547d8643480 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -485,6 +485,42 @@ static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba)
 	return UFS_HS_G3;
 }
 
+static int ufs_qcom_phy_power_on(struct ufs_qcom_host *host)
+{
+	int ret;
+
+	if (host->phy_powered_on)
+		return 0;
+
+	ret = phy_power_on(host->generic_phy);
+	if (ret) {
+		dev_err(host->hba->dev, "Failed to power on PHY: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+
+	host->phy_powered_on = true;
+
+	return 0;
+}
+
+static void ufs_qcom_phy_power_off(struct ufs_qcom_host *host)
+{
+	int ret;
+
+	if (!host->phy_powered_on)
+		return;
+
+	ret = phy_power_off(host->generic_phy);
+	if (ret) {
+		dev_warn(host->hba->dev, "Failed to power off PHY: %pe\n",
+			 ERR_PTR(ret));
+		return;
+	}
+
+	host->phy_powered_on = false;
+}
+
 static int ufs_qcom_phy_change_mode(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1390,7 +1426,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				 enum ufs_notify_change_status status)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
-	struct phy *phy;
 	int err;
 
 	/*
@@ -1401,8 +1436,6 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 	if (!host)
 		return 0;
 
-	phy = host->generic_phy;
-
 	switch (status) {
 	case PRE_CHANGE:
 		if (on) {
@@ -1420,20 +1453,14 @@ static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
 				ufs_qcom_dev_ref_clk_ctrl(host, false);
 			}
 
-			err = phy_power_off(phy);
-			if (err) {
-				dev_err(hba->dev, "phy power off failed, ret=%d\n", err);
-				return err;
-			}
+			ufs_qcom_phy_power_off(host);
 		}
 		break;
 	case POST_CHANGE:
 		if (on) {
-			err = phy_power_on(phy);
-			if (err) {
-				dev_err(hba->dev, "phy power on failed, ret = %d\n", err);
+			err = ufs_qcom_phy_power_on(host);
+			if (err)
 				return err;
-			}
 
 			/* enable the device ref clock for HS mode*/
 			if (ufshcd_is_hs_mode(&hba->pwr_info))
@@ -1629,7 +1656,7 @@ static void ufs_qcom_exit(struct ufs_hba *hba)
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
 
 	ufs_qcom_disable_lane_clks(host);
-	phy_power_off(host->generic_phy);
+	ufs_qcom_phy_power_off(host);
 	phy_exit(host->generic_phy);
 }
 
diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
index 5d083331a7f4..6eafba3c203b 100644
--- a/drivers/ufs/host/ufs-qcom.h
+++ b/drivers/ufs/host/ufs-qcom.h
@@ -322,6 +322,7 @@ struct ufs_qcom_host {
 	struct clk_bulk_data *clks;
 	u32 num_clks;
 	bool is_lane_clks_enabled;
+	bool phy_powered_on;
 
 	struct icc_path *icc_ddr;
 	struct icc_path *icc_cpu;
-- 
2.34.1

[PATCH v8 phy-next 14/31] scsi: ufs: qcom: include missing <linux/interrupt.h>

[Vladimir Oltean]

This driver uses devm_request_irq() without including <linux/interrupt.h>
by itself, which would lead to build failures if the headers providing
this transitively were to stop providing it.

On aarch64, we can see, using KCFLAGS='-H' make drivers/ufs/host/ufs-qcom.o,
that the inclusion path is:
drivers/ufs/host/ufs-qcom.c
-> include/linux/acpi.h
   -> arch/arm64/include/asm/acpi.h
      -> include/linux/efi.h
         -> include/linux/rtc.h
            -> include/linux/interrupt.h

Whereas on armv7, the situation is quite different. This architecture
has no CONFIG_ACPI symbol, and therefore on it, <linux/acpi.h> does not
include <asm/acpi.h>, and <linux/interrupt.h> is not provided that way.

It is provided, however, through this "fallback" path:

drivers/ufs/host/ufs-qcom.c
-> include/linux/phy/phy.h
   -> include/linux/regulator/consumer.h
      -> include/linux/suspend.h
         -> include/linux/swap.h
            -> include/linux/memcontrol.h
               -> include/linux/writeback.h
                  -> include/linux/interrupt.h

The point is that <linux/phy/phy.h> will stop providing
<linux/regulator/consumer.h>, and this would break the transitive
include chain on armv7.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
Cc: Can Guo <quic_cang@quicinc.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Nitin Rawat <quic_nitirawa@quicinc.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>

v7->v8: none
v6->v7: collect tag from Martin
v5->v6: patch is new
---
 drivers/ufs/host/ufs-qcom.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index c547d8643480..9a4913e254af 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -10,6 +10,7 @@
 #include <linux/devfreq.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interconnect.h>
+#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy/phy.h>
-- 
2.34.1

[PATCH v8 phy-next 15/31] drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node

[Vladimir Oltean]

The dw_hdmi-rockchip driver validates pixel clock rates against the
HDMI PHY's internal clock provider on certain SoCs like RK3328.
This is currently achieved by dereferencing hdmi->phy->dev.of_node
to obtain the provider node, which violates the Generic PHY API's
encapsulation (the goal is for struct phy to be an opaque pointer
with a hidden definition, to be interacted with only using API
functions or NULL pointer checks, for the case where optional variants
of phy_get() did not find a PHY).

Refactor dw_hdmi_rockchip_bind() to perform a manual phandle lookup
on the "hdmi" PHY index within the controller's DT node. This provides
a parallel path to the clock provider's OF node without relying on the
internal structure of the struct phy handle.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Heiko Stueber <heiko@sntech.de>
---
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v4->v8: none
v3->v4: add commit message clarification of what is understood by
        "opaque pointer"
v1->v3: none
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 25 ++++++++++++---------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 0dc1eb5d2ae3..7abb42e486c0 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -537,21 +537,22 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 				 void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct device_node *np = dev_of_node(dev);
 	struct dw_hdmi_plat_data *plat_data;
 	const struct of_device_id *match;
 	struct drm_device *drm = data;
 	struct drm_encoder *encoder;
 	struct rockchip_hdmi *hdmi;
-	int ret;
+	int ret, index;
 
-	if (!pdev->dev.of_node)
+	if (!np)
 		return -ENODEV;
 
 	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
 	if (!hdmi)
 		return -ENOMEM;
 
-	match = of_match_node(dw_hdmi_rockchip_dt_ids, pdev->dev.of_node);
+	match = of_match_node(dw_hdmi_rockchip_dt_ids, np);
 	plat_data = devm_kmemdup(&pdev->dev, match->data,
 					     sizeof(*plat_data), GFP_KERNEL);
 	if (!plat_data)
@@ -564,9 +565,9 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 	plat_data->priv_data = hdmi;
 	encoder = &hdmi->encoder.encoder;
 
-	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, np);
 	rockchip_drm_encoder_set_crtc_endpoint_id(&hdmi->encoder,
-						  dev->of_node, 0, 0);
+						  np, 0, 0);
 
 	/*
 	 * If we failed to find the CRTC(s) which this encoder is
@@ -588,13 +589,17 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return dev_err_probe(hdmi->dev, ret, "failed to get phy\n");
 	}
 
-	if (hdmi->phy) {
+	index = of_property_match_string(np, "phy-names", "hdmi");
+	if (index >= 0) {
 		struct of_phandle_args clkspec;
 
-		clkspec.np = hdmi->phy->dev.of_node;
-		hdmi->hdmiphy_clk = of_clk_get_from_provider(&clkspec);
-		if (IS_ERR(hdmi->hdmiphy_clk))
-			hdmi->hdmiphy_clk = NULL;
+		if (!of_parse_phandle_with_args(np, "phys", "#phy-cells", index,
+						&clkspec)) {
+			hdmi->hdmiphy_clk = of_clk_get_from_provider(&clkspec);
+			of_node_put(clkspec.np);
+			if (IS_ERR(hdmi->hdmiphy_clk))
+				hdmi->hdmiphy_clk = NULL;
+		}
 	}
 
 	if (hdmi->chip_data == &rk3568_chip_data) {
-- 
2.34.1

[PATCH v8 phy-next 16/31] usb: host: tegra: avoid direct dereference of phy->dev.of_node

[Vladimir Oltean]

A piece of context which seems relevant here is that the USB subsystem
is transitioning from struct usb_phy to struct phy (belonging to the
Generic PHY subsystem). Commit 1a229d8690a0 ("Revert "usb: phy: add usb
phy notify port status API"") seems to confirm that this is the case.

In the transition process, some PHY provider drivers register themselves
as both Generic PHY and USB PHY in an attempt to bridge the API gap.
Such is the case with drivers/phy/tegra/xusb.c, accessed here by the
Tegra USB host driver. This USB host expects the PHY device behind the
Generic PHY to also be a USB PHY, and calls
devm_usb_get_phy_by_node(phy->dev.of_node).

The Generic PHY exposes no API to get the OF node from a PHY device, so
the Tegra USB host driver gets it directly. However, "struct phy" will
be made an opaque pointer, to avoid misuse, so this will no longer be
possible.

Considering the fact that the Generic PHY/USB PHY duality is a
transitional state, I am deliberately not planning to make the life of
this driver any easier by providing a helper to get to the OF node
somehow. Instead, implement a parallel lookup path through which the
Tegra USB host driver can continue to get to the OF node provided by the
padctl component, using the 'phys' phandle.

Secondly (minor issue) the driver uses the phy->dev.of_node again to
print using dev_dbg() that a "remote wake" was detected. Just print the
index at which the PHY appears inside the driver's tegra->phys[] array
instead.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>

v7->v8:
- add missing of_node_put(args.np) in tegra_xusb_init_usb_phy()
- replace %d with %u in tegra_xhci_disable_phy_wake()
Both pointed out by Sashiko.

v5->v7: none
v4->v5: patch is new
---
 drivers/usb/host/xhci-tegra.c | 43 ++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index d2214d309e96..6724a777ca2a 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1491,6 +1491,7 @@ static int tegra_xhci_id_notify(struct notifier_block *nb,
 
 static int tegra_xusb_init_usb_phy(struct tegra_xusb *tegra)
 {
+	struct device_node *np = dev_of_node(tegra->dev);
 	unsigned int i;
 
 	tegra->usbphy = devm_kcalloc(tegra->dev, tegra->num_usb_phys,
@@ -1504,23 +1505,34 @@ static int tegra_xusb_init_usb_phy(struct tegra_xusb *tegra)
 	tegra->otg_usb3_port = -EINVAL;
 
 	for (i = 0; i < tegra->num_usb_phys; i++) {
-		struct phy *phy = tegra_xusb_get_phy(tegra, "usb2", i);
+		struct of_phandle_args args;
+		struct usb_phy *usbphy;
+		int index, err;
+		char prop[8];
 
-		if (!phy)
+		snprintf(prop, sizeof(prop), "usb2-%d", i);
+
+		/*
+		 * usb-phy is optional, continue if it's not available.
+		 */
+		index = of_property_match_string(np, "phy-names", prop);
+		if (index < 0)
 			continue;
 
-		tegra->usbphy[i] = devm_usb_get_phy_by_node(tegra->dev,
-							phy->dev.of_node,
-							&tegra->id_nb);
-		if (!IS_ERR(tegra->usbphy[i])) {
-			dev_dbg(tegra->dev, "usbphy-%d registered", i);
-			otg_set_host(tegra->usbphy[i]->otg, &tegra->hcd->self);
-		} else {
-			/*
-			 * usb-phy is optional, continue if its not available.
-			 */
-			tegra->usbphy[i] = NULL;
-		}
+		err = of_parse_phandle_with_args(np, "phys", "#phy-cells",
+						 index, &args);
+		if (err)
+			continue;
+
+		usbphy = devm_usb_get_phy_by_node(tegra->dev, args.np,
+						  &tegra->id_nb);
+		of_node_put(args.np);
+		if (IS_ERR(usbphy))
+			continue;
+
+		tegra->usbphy[i] = usbphy;
+		dev_dbg(tegra->dev, "usbphy-%d registered", i);
+		otg_set_host(tegra->usbphy[i]->otg, &tegra->hcd->self);
 	}
 
 	return 0;
@@ -2168,8 +2180,7 @@ static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
 			continue;
 
 		if (tegra_xusb_padctl_remote_wake_detected(padctl, tegra->phys[i]))
-			dev_dbg(tegra->dev, "%pOF remote wake detected\n",
-				tegra->phys[i]->dev.of_node);
+			dev_dbg(tegra->dev, "PHY %u remote wake detected\n", i);
 
 		tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
 	}
-- 
2.34.1

[PATCH v8 phy-next 17/31] usb: gadget: tegra-xudc: avoid direct dereference of phy->dev.of_node

[Vladimir Oltean]

In a somewhat similar situation as the Tegra USB host controller driver,
the Tegra XUDC driver for USB gadget mode needs to get to a struct
usb_phy that sits behind the same OF node as the Generic PHY. It does
that directly, which will no longer be possible. The PHY provider is
also the xusb padctl driver.

The rework here is also to implement a parallel OF node lookup path
based on the "phys" phandle and the #phy-cells of the padctl provider.

Some further notes:
- create a local "usbphy" variable to hold the devm_usb_get_phy_by_node()
  output. This makes the error checks more obvious (avoids keeping an
  error-encoded pointer in xudc->usbphy[i] even temporarily).
- the "if (IS_ERR(utmi_phy)) .. else if (utmi_phy) .. else if (!utmi_phy)"
  pattern can be simplified, considering that neither the IS_ERR() nor
  the NULL case continue execution in the current block. Therefore, we
  can move the case where the "utmi_phy" is a valid pointer outside the
  "if" checks, and this reduces the code indentation level.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: JC Kuo <jckuo@nvidia.com>
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Thierry Reding <thierry.reding@gmail.com>

v7->v8:
- remove duplicated variable "err" which shadows existing one
- stop execution on of_property_match_string() and
  of_parse_phandle_with_args() errors, instead of silently continuing
v5->v7: none
v4->v5: patch is new
---
 drivers/usb/gadget/udc/tegra-xudc.c | 43 +++++++++++++++++++++--------
 1 file changed, 32 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index e9d33be02866..f93e0a5651ab 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3494,6 +3494,7 @@ static void tegra_xudc_device_params_init(struct tegra_xudc *xudc)
 
 static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
 {
+	struct device_node *np = dev_of_node(xudc->dev);
 	int err = 0, usb3_companion_port;
 	unsigned int i, j;
 
@@ -3515,7 +3516,10 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
 	xudc->vbus_nb.notifier_call = tegra_xudc_vbus_notify;
 
 	for (i = 0; i < xudc->soc->num_phys; i++) {
+		struct of_phandle_args args;
 		char phy_name[] = "usb.-.";
+		struct usb_phy *usbphy;
+		int index;
 
 		/* Get USB2 phy */
 		snprintf(phy_name, sizeof(phy_name), "usb2-%d", i);
@@ -3525,22 +3529,39 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
 			dev_err_probe(xudc->dev, err,
 				"failed to get PHY for phy-name usb2-%d\n", i);
 			goto clean_up;
-		} else if (xudc->utmi_phy[i]) {
-			/* Get usb-phy, if utmi phy is available */
-			xudc->usbphy[i] = devm_usb_get_phy_by_node(xudc->dev,
-						xudc->utmi_phy[i]->dev.of_node,
-						NULL);
-			if (IS_ERR(xudc->usbphy[i])) {
-				err = PTR_ERR(xudc->usbphy[i]);
-				dev_err_probe(xudc->dev, err,
-					      "failed to get usbphy-%d\n", i);
-				goto clean_up;
-			}
 		} else if (!xudc->utmi_phy[i]) {
 			/* if utmi phy is not available, ignore USB3 phy get */
 			continue;
 		}
 
+		index = of_property_match_string(np, "phy-names", phy_name);
+		if (index < 0) {
+			dev_err(xudc->dev,
+				"no \"phy-names\" entry for \"%s\": %pe\n",
+				phy_name, ERR_PTR(index));
+			goto clean_up;
+		}
+
+		err = of_parse_phandle_with_args(np, "phys", "#phy-cells",
+						 index, &args);
+		if (err) {
+			dev_err(xudc->dev,
+				"failed to follow \"%s\" reference\n: %pe\n",
+				phy_name, ERR_PTR(err));
+			goto clean_up;
+		}
+
+		/* Get usb-phy, if utmi phy is available */
+		usbphy = devm_usb_get_phy_by_node(xudc->dev, args.np, NULL);
+		of_node_put(args.np);
+		if (IS_ERR(usbphy)) {
+			err = PTR_ERR(usbphy);
+			dev_err_probe(xudc->dev, err,
+				      "failed to get usbphy-%d\n", i);
+			goto clean_up;
+		}
+		xudc->usbphy[i] = usbphy;
+
 		/* Get USB3 phy */
 		usb3_companion_port = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i);
 		if (usb3_companion_port < 0)
-- 
2.34.1

[PATCH v8 phy-next 19/31] phy: make phy_get_mode(), phy_get_bus_width() NULL tolerant

[Vladimir Oltean]

The PHY API has an optional "get" which returns NULL, so it needs to
accept that NULL coming back in.

Most PHY functions do this, only the formerly static inline attribute
dereferences did not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v7->v8: remove phy_set_bus_width() from this change, it has become a
        provider function which does not need the protection
v2->v7: none
v1->v2: patch is new
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/phy/phy-core.c  | 6 ++++++
 include/linux/phy/phy.h | 2 ++
 2 files changed, 8 insertions(+)

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index fe933629286b..6cd33204d2ff 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -624,12 +624,18 @@ EXPORT_SYMBOL_GPL(phy_validate);
 
 enum phy_mode phy_get_mode(struct phy *phy)
 {
+	if (!phy)
+		return PHY_MODE_INVALID;
+
 	return phy->attrs.mode;
 }
 EXPORT_SYMBOL_GPL(phy_get_mode);
 
 int phy_get_bus_width(struct phy *phy)
 {
+	if (!phy)
+		return 0;
+
 	return phy->attrs.bus_width;
 }
 EXPORT_SYMBOL_GPL(phy_get_bus_width);
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index d716e5e0584c..99d3d65da614 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -248,6 +248,8 @@ static inline int phy_notify_state(struct phy *phy, union phy_notify state)
 
 static inline int phy_get_bus_width(struct phy *phy)
 {
+	if (!phy)
+		return 0;
 	return -ENOSYS;
 }
 
-- 
2.34.1

[PATCH v8 phy-next 20/31] phy: introduce phy_get_max_link_rate() helper for consumers

[Vladimir Oltean]

Consumer drivers shouldn't dereference struct phy, not even to get to
its attributes.

We have phy_get_bus_width() as a precedent for getting the bus_width
attribute, so let's add phy_get_max_link_rate() and use it in DRM and
CAN drivers.

In CAN drivers, the transceiver is acquired through devm_phy_optional_get()
and NULL is given by the API as a non-error case, so the PHY API should
also tolerate NULL coming back to it. This means we can further simplify
the call sites that test for the NULL quality of the transceiver.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Markus Schneider-Pargmann <msp@baylibre.com> # m_can
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> # rcar_canfd
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>

v7->v8: make "struct phy *" argument const
v3->v7: none
v2->v3: collect tag
v1->v2: make phy_get_bus_width() NULL-tolerant to simplify CAN callers
---
 drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 ++--
 drivers/gpu/drm/bridge/synopsys/dw-dp.c             | 2 +-
 drivers/net/can/at91_can.c                          | 3 +--
 drivers/net/can/flexcan/flexcan-core.c              | 3 +--
 drivers/net/can/m_can/m_can_platform.c              | 3 +--
 drivers/net/can/rcar/rcar_canfd.c                   | 3 +--
 drivers/phy/phy-core.c                              | 9 +++++++++
 include/linux/phy/phy.h                             | 6 ++++++
 8 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index d20c0f8ad04c..87847978c1fb 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1296,7 +1296,7 @@ static u32 cdns_mhdp_get_training_interval_us(struct cdns_mhdp_device *mhdp,
 
 static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
 {
-	unsigned int link_rate;
+	u32 link_rate;
 
 	/* Get source capabilities based on PHY attributes */
 
@@ -1304,7 +1304,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
 	if (!mhdp->host.lanes_cnt)
 		mhdp->host.lanes_cnt = 4;
 
-	link_rate = mhdp->phy->attrs.max_link_rate;
+	link_rate = phy_get_max_link_rate(mhdp->phy);
 	if (!link_rate)
 		link_rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_8_1);
 	else
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 45b37885d719..137ea6679732 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -530,7 +530,7 @@ static int dw_dp_link_parse(struct dw_dp *dp, struct drm_connector *connector)
 
 	link->revision = link->dpcd[DP_DPCD_REV];
 	link->rate = min_t(u32, min(dp->plat_data.max_link_rate,
-				    dp->phy->attrs.max_link_rate * 100),
+				    phy_get_max_link_rate(dp->phy) * 100),
 			   drm_dp_max_link_rate(link->dpcd));
 	link->lanes = min_t(u8, phy_get_bus_width(dp->phy),
 			    drm_dp_max_lane_count(link->dpcd));
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 58da323f14d7..7749da0a58f6 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1125,8 +1125,7 @@ static int at91_can_probe(struct platform_device *pdev)
 
 	can_rx_offload_add_timestamp(dev, &priv->offload);
 
-	if (transceiver)
-		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
 
 	if (at91_is_sam9263(priv))
 		dev->sysfs_groups[0] = &at91_sysfs_attr_group;
diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index f5d22c61503f..093e48b8da58 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -2210,8 +2210,7 @@ static int flexcan_probe(struct platform_device *pdev)
 	priv->reg_xceiver = reg_xceiver;
 	priv->transceiver = transceiver;
 
-	if (transceiver)
-		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
 
 	if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
 		priv->irq_boff = platform_get_irq(pdev, 1);
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 56da411878af..2a0f163a683a 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -131,8 +131,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
 		goto probe_fail;
 	}
 
-	if (transceiver)
-		mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+	mcan_class->can.bitrate_max = phy_get_max_link_rate(transceiver);
 
 	priv->base = addr;
 	priv->mram_base = mram_addr;
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index eaf8cac78038..9062db48d477 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1884,8 +1884,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
 	priv->transceiver = transceiver;
 	priv->channel = ch;
 	priv->gpriv = gpriv;
-	if (transceiver)
-		priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+	priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
 	priv->can.clock.freq = fcan_freq;
 	dev_info(dev, "can_clk rate is %u\n", priv->can.clock.freq);
 
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 6cd33204d2ff..8707111c4666 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -675,6 +675,15 @@ int phy_request_bus_width(struct phy *phy, int bus_width)
 }
 EXPORT_SYMBOL_GPL(phy_request_bus_width);
 
+u32 phy_get_max_link_rate(const struct phy *phy)
+{
+	if (!phy)
+		return 0;
+
+	return phy->attrs.max_link_rate;
+}
+EXPORT_SYMBOL_GPL(phy_get_max_link_rate);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index 99d3d65da614..e65865b4acfe 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
 int phy_notify_state(struct phy *phy, union phy_notify state);
 int phy_get_bus_width(struct phy *phy);
 int phy_request_bus_width(struct phy *phy, int bus_width);
+u32 phy_get_max_link_rate(const struct phy *phy);
 #else
 static inline struct phy *phy_get(struct device *dev, const char *string)
 {
@@ -260,6 +261,11 @@ static inline int phy_request_bus_width(struct phy *phy, int bus_width)
 
 	return -ENOSYS;
 }
+
+static inline u32 phy_get_max_link_rate(const struct phy *phy)
+{
+	return 0;
+}
 #endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
 
 #endif /* __PHY_CONSUMER_H */
-- 
2.34.1

[PATCH v8 phy-next 21/31] drm/rockchip: dsi: include PHY provider header

[Vladimir Oltean]

The Rockchip DSI controller is a PHY consumer driver, which is also a
PHY provider (calls devm_phy_create()) that lives out of drivers/phy/.

According to Vinod, this is discouraged, although it would be difficult
for me to address a proper movement here.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v3->v8: none
v2->v3: fix cc list
v1->v2: none
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 3547d91b25d3..c0aaa51e0237 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -27,6 +27,7 @@
 #include <drm/drm_print.h>
 #include <drm/drm_simple_kms_helper.h>
 
+#include "../../../phy/phy-provider.h" /* FIXME */
 #include "rockchip_drm_drv.h"
 
 #define DSI_PHY_RSTZ			0xa0
-- 
2.34.1

[PATCH v8 phy-next 22/31] drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width

[Vladimir Oltean]

The Cadence MHDP8546 DP bridge driver gets the PHY bus_width attribute
(holding number of lanes) directly, but doing this will no longer be
possible after the definition of struct phy is hidden from consumers.

Use the phy_get_bus_width() API function designed specifically for
consumers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>

v1->v8: none
---
 drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 87847978c1fb..76a684d4be26 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1300,7 +1300,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
 
 	/* Get source capabilities based on PHY attributes */
 
-	mhdp->host.lanes_cnt = mhdp->phy->attrs.bus_width;
+	mhdp->host.lanes_cnt = phy_get_bus_width(mhdp->phy);
 	if (!mhdp->host.lanes_cnt)
 		mhdp->host.lanes_cnt = 4;
 
-- 
2.34.1

[PATCH v8 phy-next 23/31] media: sunxi: a83-mips-csi2: include PHY provider header

[Vladimir Oltean]

The introduction commit 576d196c522b ("media: sunxi: Add support for the
A83T MIPI CSI-2 controller") says:

    This implementation splits the protocol and D-PHY registers and
    uses the PHY framework internally. The D-PHY is not registered as a
    standalone PHY driver since it cannot be used with any other
    controller.

However, this does not matter, and is not the only instance of tight PHY
provider <-> consumer pairing. According to Vinod Koul, using the PHY
provider API outside of drivers/phy/ is discouraged, although it would
be difficult for me to address a proper movement here.

So just include the private provider API header from drivers/phy/ and
leave a FIXME in place.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org>
---
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@kernel.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>

v7->v8: slightly reword commit message
v4->v7: none
v3->v4: collect tag
v1->v3: none
---
 .../media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
index 24bbcc85013d..1143feeb4fcb 100644
--- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
+++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
@@ -4,9 +4,9 @@
  * Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
  */
 
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../../../../phy/phy-provider.h" /* FIXME */
 #include "sun8i_a83t_dphy.h"
 #include "sun8i_a83t_mipi_csi2.h"
 
-- 
2.34.1

[PATCH v8 phy-next 24/31] net: renesas: rswitch: include PHY provider header

[Vladimir Oltean]

As a PHY consumer driver, the Renesas rswitch dereferences internal
fields of struct phy, something which shouldn't be done, as that is
going to be made an opaque pointer.

It is quite clearly visible that the driver is tightly coupled with the
drivers/phy/renesas/r8a779f0-ether-serdes.c, which puts heavy pressure
on the Generic PHY subsystem.

This was discussed before here:
https://lore.kernel.org/linux-phy/20260211194541.cdmibrpfn6ej6e74@skbuf/

but to summarize, it is generally expected that when a Generic PHY
function is called, it takes effect immediately. When this doesn't
happen, the PHY provider driver must change its implementation rather
than the consumer be made to work around it. PHY providers which rely on
a hardcoded call sequence in the consumer are just lazy and wrong.

The most obvious example is commit 5cb630925b49 ("net: renesas: rswitch:
Add phy_power_{on,off}() calling"). Problem description:
- Ethernet PHYs may change phydev->interface. When this happens, the
  SerDes must learn of the new phydev->interface using phy_set_mode_ext().
- drivers/phy/renesas/r8a779f0-ether-serdes.c implements phy_set_mode_ext(),
  but this only caches the mode and submode into channel->phy_interface
  and applies this to hardware during phy_power_on().

The commit author decided to work around this at the consumer site, by
power cycling the PHY for the configuration to take effect.

This had a worse implication from an API perspective in subsequent
commit 053f13f67be6 ("rswitch: Fix imbalance phy_power_off() calling").
It was observed that phy_power_on() and phy_power_off() calls need to be
balanced, and so, the consumer decided to start looking at the struct
phy :: power_count (the technical reason why I'm making this change).

This is also wrong from an API perspective because
- a consumer should only care about its own vote on the PHY power state.
  If this is a multi-port submode like QSGMII, a single phy_power_off()
  call will not actually turn the PHY off (nor should it).
- the power_count is written under the &phy->mutex, but read unlocked
  here.

The rswitch and r8a779f0-ether-serdes drivers both need to be completely
rethought in terms of Generic PHY API call sequence. There is no quick
fix to apply. Just include the PHY provider API along with the consumer
one, to keep working as before when struct phy will be made an opaque
pointer to normal PHY consumers. But this is a bad offender (and it's
not even a provider) so add a FIXME.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Michael Dege <michael.dege@renesas.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

v2->v8: none
v1->v2: collect tag
---
 drivers/net/ethernet/renesas/rswitch_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/renesas/rswitch_main.c b/drivers/net/ethernet/renesas/rswitch_main.c
index 6fe964816322..132be5f15073 100644
--- a/drivers/net/ethernet/renesas/rswitch_main.c
+++ b/drivers/net/ethernet/renesas/rswitch_main.c
@@ -27,6 +27,7 @@
 #include <linux/spinlock.h>
 #include <linux/sys_soc.h>
 
+#include "../../../phy/phy-provider.h" /* FIXME */
 #include "rswitch.h"
 #include "rswitch_l2.h"
 
-- 
2.34.1

[PATCH v8 phy-next 25/31] pinctrl: tegra-xusb: include PHY provider header

[Vladimir Oltean]

The tegra-xusb pinctrl driver is also a PHY provider (calls
devm_phy_create() for PCIe and SATA). However, according to Vinod Koul,
having PHY provider drivers outside of drivers/phy/ is discouraged,
although it would be difficult for me to address a proper movement here.

Include the private provider API header from drivers/phy/, but leave a
FIXME in place. It will have to be moved, eventually.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
---
Cc: Linus Walleij <linusw@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

v2->v8: none
v1->v2: collect tag
---
 drivers/pinctrl/tegra/pinctrl-tegra-xusb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
index c6a51bb21215..6b609bf685c7 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c
@@ -7,7 +7,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/seq_file.h>
@@ -19,6 +18,7 @@
 
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 
+#include "../../phy/phy-provider.h" /* FIXME */
 #include "../core.h"
 #include "../pinctrl-utils.h"
 
-- 
2.34.1

[PATCH v8 phy-next 26/31] power: supply: cpcap-charger: include missing <linux/property.h>

[Vladimir Oltean]

This file uses dev_fwnode() without including the proper header for it,
relying on transitive header inclusion from:

drivers/power/supply/cpcap-charger.c
- include/linux/phy/omap_usb.h
  - include/linux/usb/phy_companion.h
    - include/linux/usb/otg.h
      - include/linux/phy/phy.h
        - drivers/phy/phy-provider.h
          - include/linux/of.h
            - include/linux/property.h

With the future removal of drivers/phy/phy-provider.h from
include/linux/phy/phy.h, this transitive inclusion would break.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Cc: Sebastian Reichel <sre@kernel.org>

v2->v8: none
v1->v2: collect tag
---
 drivers/power/supply/cpcap-charger.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
index d0c3008db534..24221244b45b 100644
--- a/drivers/power/supply/cpcap-charger.c
+++ b/drivers/power/supply/cpcap-charger.c
@@ -21,6 +21,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 
 #include <linux/gpio/consumer.h>
-- 
2.34.1

[PATCH v8 phy-next 27/31] phy: move ulpi_phy.h from include/linux/phy/ to drivers/phy/

[Vladimir Oltean]

Since the PHY provider API has moved to drivers/phy/phy-provider.h and
include/linux/phy/ulpi_phy.h needs it (phy_create(),
phy_create_lookup(), etc), naturally it means ulpi_phy.h is also a PHY
provider header and should be moved to the same location.

The header is included only from drivers/phy/ti/phy-tusb1210.c, which
confirms that PHY consumers do not need it.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v7->v8: patch is new
---
 drivers/phy/ti/phy-tusb1210.c             | 3 ++-
 {include/linux => drivers}/phy/ulpi_phy.h | 0
 2 files changed, 2 insertions(+), 1 deletion(-)
 rename {include/linux => drivers}/phy/ulpi_phy.h (100%)

diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index b7080403e649..5af809231c92 100644
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -12,12 +12,13 @@
 #include <linux/ulpi/driver.h>
 #include <linux/ulpi/regs.h>
 #include <linux/gpio/consumer.h>
-#include <linux/phy/ulpi_phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
 #include <linux/property.h>
 #include <linux/workqueue.h>
 
+#include "../ulpi_phy.h"
+
 #define TI_VENDOR_ID		0x0451
 #define TI_DEVICE_TUSB1210	0x1507
 #define TI_DEVICE_TUSB1211	0x1508
diff --git a/include/linux/phy/ulpi_phy.h b/drivers/phy/ulpi_phy.h
similarity index 100%
rename from include/linux/phy/ulpi_phy.h
rename to drivers/phy/ulpi_phy.h
-- 
2.34.1

[PATCH v8 phy-next 28/31] phy: include PHY provider header (1/2)

[Vladimir Oltean]

The majority of PHY drivers are PHY providers (obviously).

Some are providers *and* consumers (phy-meson-axg-mipi-dphy,
phy-meson-axg-pcie). These are the Amlogic AXG SoCs, which split the
physical layer into two chained PHYs: the digital layer and the analog
layer. The DSI or PCIe controller interacts only with the digital PHY,
presumably for simplicity.

The rest of PHY drivers which include <linux/phy/phy.h> do so because
they call phy_pm_runtime_*(), phy_get_bus_width() or phy_get_mode(),
nominally consumer functions.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Chen-Yu Tsai <wens@kernel.org> # allwinner
---
v7->v8:
- do not include <linux/phy/phy.h> for phy_set_bus_width(); this is
  actually considered a provider function now
- mention phy_pm_runtime_*(), phy_get_bus_width() and phy_get_mode() as
  the actual reason for including the <linux/phy/phy.h> consumer header
- add more comments for reasons why <linux/phy/phy.h> is included
v6->v7: removed conflict resolution details, conflicting patches are now
        in linux-phy/next
v3->v6: none
v2->v3: add conflict resolution details
v1->v2: split in two parts to pass through linux-phy mailing list
moderation
---
 drivers/phy/allwinner/phy-sun4i-usb.c                 | 3 ++-
 drivers/phy/allwinner/phy-sun50i-usb3.c               | 3 ++-
 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c           | 4 ++--
 drivers/phy/allwinner/phy-sun9i-usb.c                 | 3 ++-
 drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c         | 2 ++
 drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c  | 3 ++-
 drivers/phy/amlogic/phy-meson-axg-pcie.c              | 2 ++
 drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c | 3 ++-
 drivers/phy/amlogic/phy-meson-g12a-usb2.c             | 3 ++-
 drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c        | 3 ++-
 drivers/phy/amlogic/phy-meson-gxl-usb2.c              | 3 ++-
 drivers/phy/amlogic/phy-meson8-hdmi-tx.c              | 3 ++-
 drivers/phy/amlogic/phy-meson8b-usb2.c                | 3 ++-
 drivers/phy/apple/atc.c                               | 3 ++-
 drivers/phy/broadcom/phy-bcm-cygnus-pcie.c            | 3 ++-
 drivers/phy/broadcom/phy-bcm-kona-usb2.c              | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns-usb2.c                | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns-usb3.c                | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns2-pcie.c               | 3 ++-
 drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c             | 3 ++-
 drivers/phy/broadcom/phy-bcm-sr-pcie.c                | 3 ++-
 drivers/phy/broadcom/phy-bcm-sr-usb.c                 | 3 ++-
 drivers/phy/broadcom/phy-bcm63xx-usbh.c               | 3 ++-
 drivers/phy/broadcom/phy-brcm-sata.c                  | 3 ++-
 drivers/phy/broadcom/phy-brcm-usb.c                   | 2 +-
 drivers/phy/cadence/cdns-dphy-rx.c                    | 3 ++-
 drivers/phy/cadence/cdns-dphy.c                       | 4 ++--
 drivers/phy/cadence/phy-cadence-salvo.c               | 3 ++-
 drivers/phy/cadence/phy-cadence-sierra.c              | 3 ++-
 drivers/phy/cadence/phy-cadence-torrent.c             | 3 ++-
 drivers/phy/canaan/phy-k230-usb.c                     | 3 ++-
 drivers/phy/eswin/phy-eic7700-sata.c                  | 3 ++-
 drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c        | 3 ++-
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c            | 4 ++--
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c            | 3 ++-
 drivers/phy/freescale/phy-fsl-imx8qm-hsio.c           | 6 +++---
 drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c       | 3 ++-
 drivers/phy/freescale/phy-fsl-lynx-28g.c              | 3 ++-
 drivers/phy/hisilicon/phy-hi3660-usb3.c               | 3 ++-
 drivers/phy/hisilicon/phy-hi3670-pcie.c               | 3 ++-
 drivers/phy/hisilicon/phy-hi3670-usb3.c               | 3 ++-
 drivers/phy/hisilicon/phy-hi6220-usb.c                | 3 ++-
 drivers/phy/hisilicon/phy-hisi-inno-usb2.c            | 3 ++-
 drivers/phy/hisilicon/phy-histb-combphy.c             | 3 ++-
 drivers/phy/hisilicon/phy-hix5hd2-sata.c              | 3 ++-
 drivers/phy/ingenic/phy-ingenic-usb.c                 | 3 ++-
 drivers/phy/intel/phy-intel-keembay-emmc.c            | 3 ++-
 drivers/phy/intel/phy-intel-keembay-usb.c             | 3 ++-
 drivers/phy/intel/phy-intel-lgm-combo.c               | 4 ++--
 drivers/phy/intel/phy-intel-lgm-emmc.c                | 3 ++-
 drivers/phy/lantiq/phy-lantiq-rcu-usb2.c              | 3 ++-
 drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c           | 4 ++--
 drivers/phy/marvell/phy-armada375-usb2.c              | 3 ++-
 drivers/phy/marvell/phy-armada38x-comphy.c            | 3 ++-
 drivers/phy/marvell/phy-berlin-sata.c                 | 3 ++-
 drivers/phy/marvell/phy-berlin-usb.c                  | 3 ++-
 drivers/phy/marvell/phy-mmp3-hsic.c                   | 3 ++-
 drivers/phy/marvell/phy-mmp3-usb.c                    | 3 ++-
 drivers/phy/marvell/phy-mvebu-a3700-comphy.c          | 3 ++-
 drivers/phy/marvell/phy-mvebu-a3700-utmi.c            | 3 ++-
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c          | 3 ++-
 drivers/phy/marvell/phy-mvebu-cp110-utmi.c            | 3 ++-
 drivers/phy/marvell/phy-mvebu-sata.c                  | 3 ++-
 drivers/phy/marvell/phy-pxa-28nm-hsic.c               | 3 ++-
 drivers/phy/marvell/phy-pxa-28nm-usb2.c               | 3 ++-
 drivers/phy/marvell/phy-pxa-usb.c                     | 3 ++-
 drivers/phy/mediatek/phy-mtk-dp.c                     | 3 ++-
 drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c            | 1 -
 drivers/phy/mediatek/phy-mtk-hdmi.h                   | 3 ++-
 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c           | 2 +-
 drivers/phy/mediatek/phy-mtk-mipi-dsi.h               | 3 ++-
 drivers/phy/mediatek/phy-mtk-pcie.c                   | 2 +-
 drivers/phy/mediatek/phy-mtk-tphy.c                   | 2 +-
 drivers/phy/mediatek/phy-mtk-ufs.c                    | 2 +-
 drivers/phy/mediatek/phy-mtk-xfi-tphy.c               | 2 +-
 drivers/phy/mediatek/phy-mtk-xsphy.c                  | 2 +-
 drivers/phy/microchip/lan966x_serdes.c                | 4 ++--
 drivers/phy/microchip/sparx5_serdes.c                 | 2 +-
 drivers/phy/motorola/phy-cpcap-usb.c                  | 3 ++-
 drivers/phy/motorola/phy-mapphone-mdm6600.c           | 4 +++-
 drivers/phy/mscc/phy-ocelot-serdes.c                  | 3 ++-
 drivers/phy/nuvoton/phy-ma35d1-usb2.c                 | 3 ++-
 drivers/phy/phy-airoha-pcie.c                         | 2 +-
 drivers/phy/phy-can-transceiver.c                     | 3 ++-
 drivers/phy/phy-core-mipi-dphy.c                      | 4 ++--
 drivers/phy/phy-core.c                                | 2 ++
 drivers/phy/phy-google-usb.c                          | 3 ++-
 drivers/phy/phy-lpc18xx-usb-otg.c                     | 3 ++-
 drivers/phy/phy-nxp-ptn3222.c                         | 3 ++-
 drivers/phy/phy-pistachio-usb.c                       | 4 ++--
 drivers/phy/phy-snps-eusb2.c                          | 2 ++
 drivers/phy/phy-xgene.c                               | 3 ++-
 92 files changed, 175 insertions(+), 98 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index e2fbf8ccf99e..9a03b5944b98 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -23,7 +23,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-sun4i-usb.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
@@ -33,6 +32,8 @@
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 #define REG_ISCR			0x00
 #define REG_PHYCTL_A10			0x04
 #define REG_PHYBIST			0x08
diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
index 363f9a0df503..d38b26e4bf95 100644
--- a/drivers/phy/allwinner/phy-sun50i-usb3.c
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -18,10 +18,11 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* Interface Status and Control Registers */
 #define SUNXI_ISCR			0x00
 #define SUNXI_PIPE_CLOCK_CONTROL	0x14
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 36eab95271b2..e96162d078eb 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -10,12 +10,12 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
 
 #define SUN6I_DPHY_GCTL_REG		0x00
 #define SUN6I_DPHY_GCTL_LANE_NUM(n)		((((n) - 1) & 3) << 4)
diff --git a/drivers/phy/allwinner/phy-sun9i-usb.c b/drivers/phy/allwinner/phy-sun9i-usb.c
index 2f9e60c188b8..f667f3f4b307 100644
--- a/drivers/phy/allwinner/phy-sun9i-usb.c
+++ b/drivers/phy/allwinner/phy-sun9i-usb.c
@@ -15,11 +15,12 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/usb/of.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define SUNXI_AHB_INCR16_BURST_EN	BIT(11)
 #define SUNXI_AHB_INCR8_BURST_EN	BIT(10)
 #define SUNXI_AHB_INCR4_BURST_EN	BIT(9)
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
index c4a56b9d3289..60d17973a38f 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -20,6 +20,8 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 /* [31] soft reset for the phy.
  *		1: reset. 0: dessert the reset.
  * [30] clock lane soft reset.
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
index c0ba2852dbb8..21e8e2a5563a 100644
--- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
@@ -7,7 +7,6 @@
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
@@ -15,6 +14,8 @@
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define HHI_MIPI_CNTL0 0x00
 #define		HHI_MIPI_CNTL0_COMMON_BLOCK	GENMASK(31, 28)
 #define		HHI_MIPI_CNTL0_ENABLE		BIT(29)
diff --git a/drivers/phy/amlogic/phy-meson-axg-pcie.c b/drivers/phy/amlogic/phy-meson-axg-pcie.c
index 14dee73f9cb5..c4d9faf3a805 100644
--- a/drivers/phy/amlogic/phy-meson-axg-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-axg-pcie.c
@@ -13,6 +13,8 @@
 #include <linux/bitfield.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define MESON_PCIE_REG0 0x00
 #define		MESON_PCIE_COMMON_CLK	BIT(4)
 #define		MESON_PCIE_PORT_SEL	GENMASK(3, 2)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
index 46e5f7e7eb6c..11626f4528dd 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
@@ -9,7 +9,6 @@
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
@@ -17,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define HHI_MIPI_CNTL0 0x00
 #define		HHI_MIPI_CNTL0_DIF_REF_CTL1	GENMASK(31, 16)
 #define		HHI_MIPI_CNTL0_DIF_REF_CTL0	GENMASK(15, 0)
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
index 66bf0b7ef8ed..f82266b76a5e 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c
@@ -17,9 +17,10 @@
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL_R0						0x0
 #define PHY_CTRL_R1						0x4
 #define PHY_CTRL_R2						0x8
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index 5468831d6ab9..60e9c3c1c449 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -12,12 +12,13 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/platform_device.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define PHY_R0							0x00
 	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
 	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 6b390304f723..b8d5b12cffc8 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -12,9 +12,10 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 /* bits [31:27] are read-only */
 #define U2P_R0							0x0
 	#define U2P_R0_BYPASS_SEL				BIT(0)
diff --git a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
index 2617f7f6c2ec..2a8c93dcda7e 100644
--- a/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
+++ b/drivers/phy/amlogic/phy-meson8-hdmi-tx.c
@@ -11,11 +11,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /*
  * Unfortunately there is no detailed documentation available for the
  * HHI_HDMI_PHY_CNTL0 register. CTL0 and CTL1 is all we know about.
diff --git a/drivers/phy/amlogic/phy-meson8b-usb2.c b/drivers/phy/amlogic/phy-meson8b-usb2.c
index a553231a9f7c..b288868b2d9e 100644
--- a/drivers/phy/amlogic/phy-meson8b-usb2.c
+++ b/drivers/phy/amlogic/phy-meson8b-usb2.c
@@ -14,10 +14,11 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/of.h>
 
+#include "../phy-provider.h"
+
 #define REG_CONFIG					0x00
 	#define REG_CONFIG_CLK_EN			BIT(0)
 	#define REG_CONFIG_CLK_SEL_MASK			GENMASK(3, 1)
diff --git a/drivers/phy/apple/atc.c b/drivers/phy/apple/atc.c
index e9d106f135c5..de9453d13c0e 100644
--- a/drivers/phy/apple/atc.c
+++ b/drivers/phy/apple/atc.c
@@ -32,7 +32,6 @@
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/soc/apple/tunable.h>
@@ -44,6 +43,8 @@
 #include <linux/usb/typec_mux.h>
 #include <linux/usb/typec_tbt.h>
 
+#include "../phy-provider.h"
+
 #define AUSPLL_FSM_CTRL 0x1014
 
 #define AUSPLL_APB_CMD_OVERRIDE 0x2000
diff --git a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
index 462c61a24ec5..e10274f53c10 100644
--- a/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c
@@ -5,9 +5,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define PCIE_CFG_OFFSET         0x00
 #define PCIE1_PHY_IDDQ_SHIFT    10
 #define PCIE0_PHY_IDDQ_SHIFT    2
diff --git a/drivers/phy/broadcom/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
index e9cc5f2cb89a..7962419b476f 100644
--- a/drivers/phy/broadcom/phy-bcm-kona-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-kona-usb2.c
@@ -12,9 +12,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define OTGCTL			(0)
 #define OTGCTL_OTGSTAT2		BIT(31)
 #define OTGCTL_OTGSTAT1		BIT(30)
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
index c5d35031b398..95331d08b367 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb2.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb2.c
@@ -13,11 +13,12 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 struct bcm_ns_usb2 {
 	struct device *dev;
 	struct clk *ref_clk;
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
index 6e56498d0644..f2aa4014f197 100644
--- a/drivers/phy/broadcom/phy-bcm-ns-usb3.c
+++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c
@@ -19,10 +19,11 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define BCM_NS_USB3_PHY_BASE_ADDR_REG	0x1f
 #define BCM_NS_USB3_PHY_PLL30_BLOCK	0x8000
 #define BCM_NS_USB3_PHY_TX_PMD_BLOCK	0x8040
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
index 67a6ae5ecba0..9c2c603426ca 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c
@@ -6,7 +6,8 @@
 #include <linux/of_mdio.h>
 #include <linux/mdio.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 #define BLK_ADDR_REG_OFFSET	0x1f
 #define PLL_AFE1_100MHZ_BLK	0x2100
diff --git a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
index 8473fa574529..7543211fb998 100644
--- a/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
+++ b/drivers/phy/broadcom/phy-bcm-ns2-usbdrd.c
@@ -14,12 +14,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 #define ICFG_DRD_AFE		0x0
 #define ICFG_MISC_STAT		0x18
 #define ICFG_DRD_P0CTL		0x1C
diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
index 706e1d83b4ce..8f4e44d1dea6 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
@@ -9,10 +9,11 @@
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* we have up to 8 PAXB based RC. The 9th one is always PAXC */
 #define SR_NR_PCIE_PHYS               9
 #define SR_PAXC_PHY_IDX               (SR_NR_PCIE_PHYS - 1)
diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c
index 6bcfe83609c8..4c863738bdca 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-usb.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c
@@ -8,9 +8,10 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 enum bcm_usb_phy_version {
 	BCM_SR_USB_COMBO_PHY,
 	BCM_SR_USB_HS_PHY,
diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
index 29fd6791bae6..63099da486c6 100644
--- a/drivers/phy/broadcom/phy-bcm63xx-usbh.c
+++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
@@ -18,10 +18,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* USBH control register offsets */
 enum usbh_regs {
 	USBH_BRT_CONTROL1 = 0,
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index fb69e21a0292..ab826f9c8678 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -13,9 +13,10 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define SATA_PCB_BANK_OFFSET				0x23c
 #define SATA_PCB_REG_OFFSET(ofs)			((ofs) * 4)
 
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index 59d756a10d6c..d660a0ed03ee 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -11,7 +11,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/soc/brcmstb/brcmstb.h>
@@ -19,6 +18,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/suspend.h>
 
+#include "../phy-provider.h"
 #include "phy-brcm-usb-init.h"
 
 static DEFINE_MUTEX(sysfs_lock);
diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c
index 3ac80141189c..7097ac17443f 100644
--- a/drivers/phy/cadence/cdns-dphy-rx.c
+++ b/drivers/phy/cadence/cdns-dphy-rx.c
@@ -9,12 +9,13 @@
 #include <linux/iopoll.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sys_soc.h>
 
+#include "../phy-provider.h"
+
 #define DPHY_PMA_CMN(reg)		(reg)
 #define DPHY_PCS(reg)			(0xb00 + (reg))
 #define DPHY_ISO(reg)			(0xc00 + (reg))
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index d5b0e516b93c..40bc18405082 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -10,11 +10,11 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
 
 #define REG_WAKEUP_TIME_NS		800
 #define DPHY_PLL_RATE_HZ		108000000
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index f461585c84c6..8ed74db50dfa 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -10,12 +10,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
+#include "../phy-provider.h"
+
 #define USB3_PHY_OFFSET			0x0
 #define USB2_PHY_OFFSET			0x38000
 /* USB3 PHY register definition */
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 92ab1a31646a..fb44b8fc5e3f 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -12,7 +12,6 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -23,6 +22,8 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/phy/phy-cadence.h>
 
+#include "../phy-provider.h"
+
 #define NUM_SSC_MODE		3
 #define NUM_PHY_TYPE		5
 
diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index d446a0f97688..974e12e34ae1 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -17,11 +17,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define REF_CLK_19_2MHZ		19200000
 #define REF_CLK_25MHZ		25000000
 #define REF_CLK_100MHZ		100000000
diff --git a/drivers/phy/canaan/phy-k230-usb.c b/drivers/phy/canaan/phy-k230-usb.c
index 52dad35fc6cf..4305763a5456 100644
--- a/drivers/phy/canaan/phy-k230-usb.c
+++ b/drivers/phy/canaan/phy-k230-usb.c
@@ -8,9 +8,10 @@
 #include <linux/bitfield.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define MAX_PHYS		2
 
 /* Register offsets within the HiSysConfig system controller */
diff --git a/drivers/phy/eswin/phy-eic7700-sata.c b/drivers/phy/eswin/phy-eic7700-sata.c
index c33653d48daa..387d5c8c11d9 100644
--- a/drivers/phy/eswin/phy-eic7700-sata.c
+++ b/drivers/phy/eswin/phy-eic7700-sata.c
@@ -14,11 +14,12 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define SATA_AXI_LP_CTRL			0x08
 #define SATA_MPLL_CTRL				0x20
 #define SATA_P0_PHY_STAT			0x24
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
index 0928a526e2ab..314aa227f753 100644
--- a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -16,11 +16,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 
+#include "../phy-provider.h"
+
 /* Control and Status Registers(CSR) */
 #define PHY_CTRL			0x00
 #define  CCM_MASK			GENMASK(7, 5)
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 7f5600103a00..6197cfc9b9a4 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -3,6 +3,7 @@
  * Copyright 2021 NXP
  */
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -12,12 +13,11 @@
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "../phy-provider.h"
 
 #define IMX8MM_PCIE_PHY_CMN_REG061	0x184
 #define  ANA_PLL_CLK_OUT_TO_EXT_IO_EN	BIT(0)
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index b05d80e849a1..9b938b446996 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -7,11 +7,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/typec_mux.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
 #define PHY_CTRL0_FSEL_MASK		GENMASK(10, 5)
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
index 279b8ac7822d..b274fd24b59a 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
@@ -3,6 +3,8 @@
  * Copyright 2024 NXP
  */
 
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -11,13 +13,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pci_regs.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/pcie.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "../phy-provider.h"
 
 #define MAX_NUM_LANE	3
 #define LANE_NUM_CLKS	5
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
index ece357443521..55c23bef5121 100644
--- a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
@@ -9,12 +9,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define REG_SET		0x4
 #define REG_CLR		0x8
 
diff --git a/drivers/phy/freescale/phy-fsl-lynx-28g.c b/drivers/phy/freescale/phy-fsl-lynx-28g.c
index 63427fc34e26..38862c9c6c94 100644
--- a/drivers/phy/freescale/phy-fsl-lynx-28g.c
+++ b/drivers/phy/freescale/phy-fsl-lynx-28g.c
@@ -5,10 +5,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 #define LYNX_28G_NUM_LANE			8
 #define LYNX_28G_NUM_PLL			2
 
diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c
index e2a09d67faed..b66ff3be1aed 100644
--- a/drivers/phy/hisilicon/phy-hi3660-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c
@@ -12,10 +12,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PERI_CRG_CLK_EN4			0x40
 #define PERI_CRG_CLK_DIS4			0x44
 #define GT_CLK_USB3OTG_REF			BIT(0)
diff --git a/drivers/phy/hisilicon/phy-hi3670-pcie.c b/drivers/phy/hisilicon/phy-hi3670-pcie.c
index dbc7dcce682b..b7cf44078e0d 100644
--- a/drivers/phy/hisilicon/phy-hi3670-pcie.c
+++ b/drivers/phy/hisilicon/phy-hi3670-pcie.c
@@ -26,11 +26,12 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/types.h>
 
+#include "../phy-provider.h"
+
 #define AXI_CLK_FREQ				207500000
 #define REF_CLK_FREQ				100000000
 
diff --git a/drivers/phy/hisilicon/phy-hi3670-usb3.c b/drivers/phy/hisilicon/phy-hi3670-usb3.c
index 40d3cf128b44..004c51500597 100644
--- a/drivers/phy/hisilicon/phy-hi3670-usb3.c
+++ b/drivers/phy/hisilicon/phy-hi3670-usb3.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define SCTRL_SCDEEPSLEEPED		(0x0)
 #define USB_CLK_SELECTED		BIT(20)
 
diff --git a/drivers/phy/hisilicon/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c
index 22d8d8a8dabe..1b5a2d3e3e44 100644
--- a/drivers/phy/hisilicon/phy-hi6220-usb.c
+++ b/drivers/phy/hisilicon/phy-hi6220-usb.c
@@ -8,9 +8,10 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define SC_PERIPH_CTRL4			0x00c
 
 #define CTRL4_PICO_SIDDQ		BIT(6)
diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
index c843923252aa..f6339228d191 100644
--- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -10,10 +10,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define INNO_PHY_PORT_NUM	2
 #define REF_CLK_STABLE_TIME	100	/* unit:us */
 #define UTMI_CLK_STABLE_TIME	200	/* unit:us */
diff --git a/drivers/phy/hisilicon/phy-histb-combphy.c b/drivers/phy/hisilicon/phy-histb-combphy.c
index 9dd0bd00b4e4..9b6ed1644d74 100644
--- a/drivers/phy/hisilicon/phy-histb-combphy.c
+++ b/drivers/phy/hisilicon/phy-histb-combphy.c
@@ -14,12 +14,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define COMBPHY_MODE_PCIE		0
 #define COMBPHY_MODE_USB3		1
 #define COMBPHY_MODE_SATA		2
diff --git a/drivers/phy/hisilicon/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
index 1b26ddb4c8a7..57994f69417d 100644
--- a/drivers/phy/hisilicon/phy-hix5hd2-sata.c
+++ b/drivers/phy/hisilicon/phy-hix5hd2-sata.c
@@ -9,10 +9,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define SATA_PHY0_CTLL		0xa0
 #define MPLL_MULTIPLIER_SHIFT	1
 #define MPLL_MULTIPLIER_MASK	0xfe
diff --git a/drivers/phy/ingenic/phy-ingenic-usb.c b/drivers/phy/ingenic/phy-ingenic-usb.c
index 7e62d46850fd..d656f97729c4 100644
--- a/drivers/phy/ingenic/phy-ingenic-usb.c
+++ b/drivers/phy/ingenic/phy-ingenic-usb.c
@@ -12,10 +12,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 /* OTGPHY register offsets */
 #define REG_USBPCR_OFFSET			0x00
 #define REG_USBRDT_OFFSET			0x04
diff --git a/drivers/phy/intel/phy-intel-keembay-emmc.c b/drivers/phy/intel/phy-intel-keembay-emmc.c
index 0eb11ac7c2e2..fdba1d050439 100644
--- a/drivers/phy/intel/phy-intel-keembay-emmc.c
+++ b/drivers/phy/intel/phy-intel-keembay-emmc.c
@@ -11,10 +11,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* eMMC/SD/SDIO core/phy configuration registers */
 #define PHY_CFG_0		0x24
 #define  SEL_DLY_TXCLK_MASK	BIT(29)
diff --git a/drivers/phy/intel/phy-intel-keembay-usb.c b/drivers/phy/intel/phy-intel-keembay-usb.c
index c8b05f7b2445..4e690f3eb560 100644
--- a/drivers/phy/intel/phy-intel-keembay-usb.c
+++ b/drivers/phy/intel/phy-intel-keembay-usb.c
@@ -10,10 +10,11 @@
 #include <linux/delay.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* USS (USB Subsystem) clock control registers */
 #define USS_CPR_CLK_EN		0x00
 #define USS_CPR_CLK_SET		0x04
diff --git a/drivers/phy/intel/phy-intel-lgm-combo.c b/drivers/phy/intel/phy-intel-lgm-combo.c
index 9ee3cf61cdd0..2a8b0caa0e59 100644
--- a/drivers/phy/intel/phy-intel-lgm-combo.c
+++ b/drivers/phy/intel/phy-intel-lgm-combo.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2019-2020 Intel Corporation.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
@@ -12,12 +13,11 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 #define PCIE_PHY_GEN_CTRL	0x00
 #define PCIE_PHY_CLK_PAD	BIT(17)
diff --git a/drivers/phy/intel/phy-intel-lgm-emmc.c b/drivers/phy/intel/phy-intel-lgm-emmc.c
index 703aeb122541..479a530dd630 100644
--- a/drivers/phy/intel/phy-intel-lgm-emmc.c
+++ b/drivers/phy/intel/phy-intel-lgm-emmc.c
@@ -11,10 +11,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* eMMC phy register definitions */
 #define EMMC_PHYCTRL0_REG	0xa8
 #define DR_TY_MASK		GENMASK(30, 28)
diff --git a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
index 82f1ffc0b0ad..eb6c201f7c87 100644
--- a/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
+++ b/drivers/phy/lantiq/phy-lantiq-rcu-usb2.c
@@ -12,12 +12,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* Transmitter HS Pre-Emphasis Enable */
 #define RCU_CFG1_TX_PEE		BIT(0)
 /* Disconnect Threshold */
diff --git a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
index 406a87c8b759..70da76399e30 100644
--- a/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
+++ b/drivers/phy/lantiq/phy-lantiq-vrx200-pcie.c
@@ -11,6 +11,7 @@
  * TODO: PHY modes other than 36MHz (without "SSC")
  */
 
+#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
 #include <linux/clk.h>
@@ -18,13 +19,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
+#include "../phy-provider.h"
 
 #define PCIE_PHY_PLL_CTRL1				0x44
 
diff --git a/drivers/phy/marvell/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
index 3731f9b25655..d5c100096c3d 100644
--- a/drivers/phy/marvell/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
@@ -16,9 +16,10 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define USB2_PHY_CONFIG_DISABLE BIT(0)
 
 struct armada375_cluster_phy {
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
index 5063361b0120..9653863f90bb 100644
--- a/drivers/phy/marvell/phy-armada38x-comphy.c
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -9,10 +9,11 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define MAX_A38X_COMPHY	6
 #define MAX_A38X_PORTS	3
 
diff --git a/drivers/phy/marvell/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c
index c90e2867900c..4d4013d115ca 100644
--- a/drivers/phy/marvell/phy-berlin-sata.c
+++ b/drivers/phy/marvell/phy-berlin-sata.c
@@ -10,10 +10,11 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define HOST_VSA_ADDR		0x0
 #define HOST_VSA_DATA		0x4
 #define PORT_SCR_CTL		0x2c
diff --git a/drivers/phy/marvell/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c
index f26bf630da2c..a3e58deaaa74 100644
--- a/drivers/phy/marvell/phy-berlin-usb.c
+++ b/drivers/phy/marvell/phy-berlin-usb.c
@@ -9,11 +9,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define USB_PHY_PLL		0x04
 #define USB_PHY_PLL_CONTROL	0x08
 #define USB_PHY_TX_CTRL0	0x10
diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c b/drivers/phy/marvell/phy-mmp3-hsic.c
index 72ab6da0ebc3..90498211431b 100644
--- a/drivers/phy/marvell/phy-mmp3-hsic.c
+++ b/drivers/phy/marvell/phy-mmp3-hsic.c
@@ -7,9 +7,10 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define HSIC_CTRL	0x08
 #define HSIC_ENABLE	BIT(7)
 #define PLL_BYPASS	BIT(4)
diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c
index 5b71deb08851..ba67bcc2c3f9 100644
--- a/drivers/phy/marvell/phy-mmp3-usb.c
+++ b/drivers/phy/marvell/phy-mmp3-usb.c
@@ -8,10 +8,11 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/soc/mmp/cputype.h>
 
+#include "../phy-provider.h"
+
 #define USB2_PLL_REG0		0x4
 #define USB2_PLL_REG1		0x8
 #define USB2_TX_REG0		0x10
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
index 1d1db1737422..3acfd74c3eca 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -21,10 +21,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 
+#include "../phy-provider.h"
+
 #define PLL_SET_DELAY_US		600
 #define COMPHY_PLL_SLEEP		1000
 #define COMPHY_PLL_TIMEOUT		150000
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
index 04f4fb4bed70..c17ce28ceb0b 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* Armada 3700 UTMI PHY registers */
 #define USB2_PHY_PLL_CTRL_REG0			0x0
 #define   PLL_REF_DIV_OFF			0
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 71f9c14fb50d..18ad172135ea 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -13,10 +13,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* Relative to priv->base */
 #define MVEBU_COMPHY_SERDES_CFG0(n)		(0x0 + (n) * 0x1000)
 #define     MVEBU_COMPHY_SERDES_CFG0_PU_PLL	BIT(1)
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
index dd3e515a8e86..f3e2ef54c37b 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-utmi.c
@@ -13,12 +13,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
+#include "../phy-provider.h"
+
 #define UTMI_PHY_PORTS				2
 
 /* CP110 UTMI register macro definetions */
diff --git a/drivers/phy/marvell/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
index 89a5a2b69d80..b9a9eca74789 100644
--- a/drivers/phy/marvell/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
@@ -8,11 +8,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/phy/phy.h>
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 struct priv {
 	struct clk	*clk;
 	void __iomem	*base;
diff --git a/drivers/phy/marvell/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
index eff6dd6b2dd0..6feee8d1ca70 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
@@ -17,7 +17,8 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 #define PHY_28NM_HSIC_CTRL			0x08
 #define PHY_28NM_HSIC_IMPCAL_CAL		0x18
diff --git a/drivers/phy/marvell/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
index 64afb82cf70e..39b8344803cb 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-usb2.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-usb2.c
@@ -17,7 +17,8 @@
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 /* USB PXA1928 PHY mapping */
 #define PHY_28NM_PLL_REG0			0x0
diff --git a/drivers/phy/marvell/phy-pxa-usb.c b/drivers/phy/marvell/phy-pxa-usb.c
index c0bb71f80c04..9a8ab813d001 100644
--- a/drivers/phy/marvell/phy-pxa-usb.c
+++ b/drivers/phy/marvell/phy-pxa-usb.c
@@ -10,9 +10,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 /* phy regs */
 #define UTMI_REVISION		0x0
 #define UTMI_CTRL		0x4
diff --git a/drivers/phy/mediatek/phy-mtk-dp.c b/drivers/phy/mediatek/phy-mtk-dp.c
index d7024a144335..ab3778447570 100644
--- a/drivers/phy/mediatek/phy-mtk-dp.c
+++ b/drivers/phy/mediatek/phy-mtk-dp.c
@@ -10,10 +10,11 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PHY_OFFSET			0x1000
 
 #define MTK_DP_PHY_DIG_PLL_CTL_1	(PHY_OFFSET + 0x14)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index 1426a2db984d..30015bac3f73 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -7,7 +7,6 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi.h b/drivers/phy/mediatek/phy-mtk-hdmi.h
index 99d917e0036a..bfddd8dbe9dd 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi.h
+++ b/drivers/phy/mediatek/phy-mtk-hdmi.h
@@ -11,12 +11,13 @@
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/types.h>
 
+#include "../phy-provider.h"
+
 struct mtk_hdmi_phy;
 
 struct mtk_hdmi_phy_conf {
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
index 058e1d926630..5e008204ecca 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
@@ -12,10 +12,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 #include "phy-mtk-mipi-csi-0-5-rx-reg.h"
 
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.h b/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
index 5d4876f1dc95..676c8f78d9d6 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.h
@@ -13,9 +13,10 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 struct mtk_mipitx_data {
 	const u32 mppll_preserve;
 	const struct clk_ops *mipi_tx_clk_ops;
diff --git a/drivers/phy/mediatek/phy-mtk-pcie.c b/drivers/phy/mediatek/phy-mtk-pcie.c
index a2f69d6c72f0..1ab7c1dc2753 100644
--- a/drivers/phy/mediatek/phy-mtk-pcie.c
+++ b/drivers/phy/mediatek/phy-mtk-pcie.c
@@ -8,10 +8,10 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 #define PEXTP_ANA_GLB_00_REG		0x9000
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index acf506529507..6f98de067327 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -15,10 +15,10 @@
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 /* version V1 sub-banks offset base address */
diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c
index 0cb5a25b1b7a..de517fcc4f3e 100644
--- a/drivers/phy/mediatek/phy-mtk-ufs.c
+++ b/drivers/phy/mediatek/phy-mtk-ufs.c
@@ -9,9 +9,9 @@
 #include <linux/io.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 /* mphy register and offsets */
diff --git a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
index 100a50d0e861..036a4bb58dcf 100644
--- a/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xfi-tphy.c
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/reset.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 #define MTK_XFI_TPHY_NUM_CLOCKS		2
diff --git a/drivers/phy/mediatek/phy-mtk-xsphy.c b/drivers/phy/mediatek/phy-mtk-xsphy.c
index c0ddb9273cc3..5e61abddaf54 100644
--- a/drivers/phy/mediatek/phy-mtk-xsphy.c
+++ b/drivers/phy/mediatek/phy-mtk-xsphy.c
@@ -14,10 +14,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
 #include "phy-mtk-io.h"
 
 /* u2 phy banks */
diff --git a/drivers/phy/microchip/lan966x_serdes.c b/drivers/phy/microchip/lan966x_serdes.c
index 835e369cdfc5..8769518f9708 100644
--- a/drivers/phy/microchip/lan966x_serdes.c
+++ b/drivers/phy/microchip/lan966x_serdes.c
@@ -1,15 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+#include <dt-bindings/phy/phy-lan966x-serdes.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
-#include <dt-bindings/phy/phy-lan966x-serdes.h>
 #include "lan966x_serdes_regs.h"
+#include "../phy-provider.h"
 
 #define PLL_CONF_MASK		GENMASK(4, 3)
 #define PLL_CONF_25MHZ		0
diff --git a/drivers/phy/microchip/sparx5_serdes.c b/drivers/phy/microchip/sparx5_serdes.c
index 320cf5b50a8c..09c22a6a2639 100644
--- a/drivers/phy/microchip/sparx5_serdes.c
+++ b/drivers/phy/microchip/sparx5_serdes.c
@@ -17,8 +17,8 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 
+#include "../phy-provider.h"
 #include "sparx5_serdes.h"
 
 #define SPX5_SERDES_10G_START 13
diff --git a/drivers/phy/motorola/phy-cpcap-usb.c b/drivers/phy/motorola/phy-cpcap-usb.c
index 7cb020dd3423..66a834c208fc 100644
--- a/drivers/phy/motorola/phy-cpcap-usb.c
+++ b/drivers/phy/motorola/phy-cpcap-usb.c
@@ -24,10 +24,11 @@
 #include <linux/gpio/consumer.h>
 #include <linux/mfd/motorola-cpcap.h>
 #include <linux/phy/omap_usb.h>
-#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/musb.h>
 
+#include "../phy-provider.h"
+
 /* CPCAP_REG_USBC1 register bits */
 #define CPCAP_BIT_IDPULSE		BIT(15)
 #define CPCAP_BIT_ID100KPU		BIT(14)
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index ce1dad8c438d..92f63e52bd1d 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -15,10 +15,12 @@
 
 #include <linux/gpio/consumer.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_pm_runtime_*() */
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
 
+#include "../phy-provider.h"
+
 #define PHY_MDM6600_PHY_DELAY_MS	4000	/* PHY enable 2.2s to 3.5s */
 #define PHY_MDM6600_ENABLED_DELAY_MS	8000	/* 8s more total for MDM6600 */
 #define PHY_MDM6600_WAKE_KICK_MS	600	/* time on after GPIO toggle */
diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
index 1cd1b5db2ad7..13f83876d954 100644
--- a/drivers/phy/mscc/phy-ocelot-serdes.c
+++ b/drivers/phy/mscc/phy-ocelot-serdes.c
@@ -12,12 +12,13 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <soc/mscc/ocelot_hsio.h>
 #include <dt-bindings/phy/phy-ocelot-serdes.h>
 
+#include "../phy-provider.h"
+
 struct serdes_ctrl {
 	struct regmap		*regs;
 	struct device		*dev;
diff --git a/drivers/phy/nuvoton/phy-ma35d1-usb2.c b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
index 9a459b700ed4..520c86188fe2 100644
--- a/drivers/phy/nuvoton/phy-ma35d1-usb2.c
+++ b/drivers/phy/nuvoton/phy-ma35d1-usb2.c
@@ -10,10 +10,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* USB PHY Miscellaneous Control Register */
 #define MA35_SYS_REG_USBPMISCR	0x60
 #define PHY0POR			BIT(0)  /* PHY Power-On Reset Control Bit */
diff --git a/drivers/phy/phy-airoha-pcie.c b/drivers/phy/phy-airoha-pcie.c
index 56e9ade8a9fd..d9817eed2631 100644
--- a/drivers/phy/phy-airoha-pcie.c
+++ b/drivers/phy/phy-airoha-pcie.c
@@ -9,11 +9,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
 #include "phy-airoha-pcie-regs.h"
+#include "phy-provider.h"
 
 #define LEQ_LEN_CTRL_MAX_VAL	7
 #define FREQ_LOCK_MAX_ATTEMPT	10
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 2b52e47f247a..68f771a7bad7 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -6,13 +6,14 @@
  *
  */
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/mux/consumer.h>
 
+#include "phy-provider.h"
+
 struct can_transceiver_data {
 	u32 flags;
 #define CAN_TRANSCEIVER_STB_PRESENT	BIT(0)
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index f4956a417a47..770cfe2a2279 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -4,13 +4,13 @@
  * Copyright (C) 2018 Cadence Design Systems Inc.
  */
 
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/errno.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/time64.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "phy-provider.h"
 
 /*
  * Minimum D-PHY timings based on MIPI D-PHY specification. Derived
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 8707111c4666..a738594146e2 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -20,6 +20,8 @@
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 
+#include "phy-provider.h"
+
 #define	to_phy(a)	(container_of((a), struct phy, dev))
 
 /**
diff --git a/drivers/phy/phy-google-usb.c b/drivers/phy/phy-google-usb.c
index 48cfa2e28347..539732f4869e 100644
--- a/drivers/phy/phy-google-usb.c
+++ b/drivers/phy/phy-google-usb.c
@@ -14,13 +14,14 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/usb/typec_mux.h>
 
+#include "phy-provider.h"
+
 #define USBCS_USB2PHY_CFG19_OFFSET 0x0
 #define USBCS_USB2PHY_CFG19_PHY_CFG_PLL_FB_DIV GENMASK(19, 8)
 
diff --git a/drivers/phy/phy-lpc18xx-usb-otg.c b/drivers/phy/phy-lpc18xx-usb-otg.c
index f905d3c64584..554dfa55fe7e 100644
--- a/drivers/phy/phy-lpc18xx-usb-otg.c
+++ b/drivers/phy/phy-lpc18xx-usb-otg.c
@@ -10,10 +10,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "phy-provider.h"
+
 /* USB OTG PHY register offset and bit in CREG */
 #define LPC18XX_CREG_CREG0		0x004
 #define LPC18XX_CREG_CREG0_USB0PHY	BIT(5)
diff --git a/drivers/phy/phy-nxp-ptn3222.c b/drivers/phy/phy-nxp-ptn3222.c
index c6179d8701e6..ae75b760a30d 100644
--- a/drivers/phy/phy-nxp-ptn3222.c
+++ b/drivers/phy/phy-nxp-ptn3222.c
@@ -7,10 +7,11 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
+#include "phy-provider.h"
+
 #define NUM_SUPPLIES 2
 
 struct ptn3222 {
diff --git a/drivers/phy/phy-pistachio-usb.c b/drivers/phy/phy-pistachio-usb.c
index 231792f48ced..8eed6f505a31 100644
--- a/drivers/phy/phy-pistachio-usb.c
+++ b/drivers/phy/phy-pistachio-usb.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2015 Google, Inc.
  */
 
+#include <dt-bindings/phy/phy-pistachio-usb.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -12,11 +13,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
-#include <dt-bindings/phy/phy-pistachio-usb.h>
+#include "phy-provider.h"
 
 #define USB_PHY_CONTROL1				0x04
 #define USB_PHY_CONTROL1_FSEL_SHIFT			2
diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
index f90bf7e95463..9062737bfad4 100644
--- a/drivers/phy/phy-snps-eusb2.c
+++ b/drivers/phy/phy-snps-eusb2.c
@@ -13,6 +13,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include "phy-provider.h"
+
 #define EXYNOS_USB_PHY_HS_PHY_CTRL_RST	(0x0)
 #define USB_PHY_RST_MASK		GENMASK(1, 0)
 #define UTMI_PORT_RST_MASK		GENMASK(5, 4)
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index 5007dc7a357c..90a00498ec0a 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -43,9 +43,10 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/delay.h>
-#include <linux/phy/phy.h>
 #include <linux/clk.h>
 
+#include "phy-provider.h"
+
 /* Max 2 lanes per a PHY unit */
 #define MAX_LANE			2
 
-- 
2.34.1

[PATCH v8 phy-next 29/31] phy: include PHY provider header (2/2)

[Vladimir Oltean]

The majority of PHY drivers are PHY providers (obviously).

Some are chained PHY provider+consumer (phy-qcom-m31-eusb2.c,
phy-exynos5-usbdrd.c).

Others include <linux/phy/phy.h> because they call consumer functions
such as phy_pm_runtime_get() - phy-mapphone-mdm6600.c. See commit
2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM
calls") for the story behind that. My understanding is it's a pragmatic
shortcut, but it doesn't bother much.

Another is the recently moved drivers/phy/ulpi_phy.h, which is used by
the TI phy-tusb1210.c provider.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> #phy/qualcomm
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
---
v7->v8:
- do not include <linux/phy/phy.h> for phy_set_bus_width(); this is
  actually considered a provider function now
- add more comments for reasons why <linux/phy/phy.h> is included
- update phy-provider.h relative include path from ulpi_phy.h
v6->v7:
- manually resolved conflict in
  drivers/phy/qualcomm/phy-qcom-sgmii-eth.c with commit 4ff5801f45b4
  ("phy: qcom-sgmii-eth: add .set_mode() and .validate() methods"), now
  present in linux-phy/next.
v4->v6: none
v3->v4:
- fix phy-provider.h path from drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
- make sure include/linux/phy/tegra/xusb.h is not reliant upon an
  external "struct phy" definition
v2->v3: none
v1->v2: split in two parts to pass through linux-phy mailing list
moderation. The split is at letter 'q' (Qualcomm)
---
 drivers/phy/qualcomm/phy-ath79-usb.c               | 3 ++-
 drivers/phy/qualcomm/phy-qcom-apq8064-sata.c       | 3 ++-
 drivers/phy/qualcomm/phy-qcom-edp.c                | 3 ++-
 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c     | 3 ++-
 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c        | 3 ++-
 drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c       | 3 ++-
 drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c        | 3 ++-
 drivers/phy/qualcomm/phy-qcom-m31-eusb2.c          | 2 ++
 drivers/phy/qualcomm/phy-qcom-m31.c                | 3 ++-
 drivers/phy/qualcomm/phy-qcom-pcie2.c              | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c          | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c   | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c           | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c            | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c     | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c           | 3 ++-
 drivers/phy/qualcomm/phy-qcom-qusb2.c              | 4 ++--
 drivers/phy/qualcomm/phy-qcom-sgmii-eth.c          | 3 ++-
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c      | 3 ++-
 drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c   | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c        | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-hs.c             | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-hsic.c           | 3 ++-
 drivers/phy/qualcomm/phy-qcom-usb-ss.c             | 3 ++-
 drivers/phy/ralink/phy-mt7621-pci.c                | 3 ++-
 drivers/phy/ralink/phy-ralink-usb.c                | 3 ++-
 drivers/phy/realtek/phy-rtk-usb2.c                 | 3 ++-
 drivers/phy/realtek/phy-rtk-usb3.c                 | 3 ++-
 drivers/phy/renesas/phy-rcar-gen2.c                | 3 ++-
 drivers/phy/renesas/phy-rcar-gen3-pcie.c           | 3 ++-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c           | 3 ++-
 drivers/phy/renesas/phy-rcar-gen3-usb3.c           | 3 ++-
 drivers/phy/renesas/phy-rzg3e-usb3.c               | 3 ++-
 drivers/phy/renesas/r8a779f0-ether-serdes.c        | 3 ++-
 drivers/phy/rockchip/phy-rockchip-dp.c             | 3 ++-
 drivers/phy/rockchip/phy-rockchip-dphy-rx0.c       | 3 ++-
 drivers/phy/rockchip/phy-rockchip-emmc.c           | 3 ++-
 drivers/phy/rockchip/phy-rockchip-inno-csidphy.c   | 3 ++-
 drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c   | 4 ++--
 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c      | 4 +++-
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c      | 3 ++-
 drivers/phy/rockchip/phy-rockchip-naneng-combphy.c | 3 ++-
 drivers/phy/rockchip/phy-rockchip-pcie.c           | 2 +-
 drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c  | 3 ++-
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c  | 4 +++-
 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c     | 3 ++-
 drivers/phy/rockchip/phy-rockchip-typec.c          | 4 ++--
 drivers/phy/rockchip/phy-rockchip-usb.c            | 3 ++-
 drivers/phy/rockchip/phy-rockchip-usbdp.c          | 3 ++-
 drivers/phy/samsung/phy-exynos-dp-video.c          | 3 ++-
 drivers/phy/samsung/phy-exynos-mipi-video.c        | 3 ++-
 drivers/phy/samsung/phy-exynos-pcie.c              | 3 ++-
 drivers/phy/samsung/phy-exynos4210-usb2.c          | 3 ++-
 drivers/phy/samsung/phy-exynos4x12-usb2.c          | 3 ++-
 drivers/phy/samsung/phy-exynos5-usbdrd.c           | 2 ++
 drivers/phy/samsung/phy-exynos5250-sata.c          | 3 ++-
 drivers/phy/samsung/phy-exynos5250-usb2.c          | 3 ++-
 drivers/phy/samsung/phy-s5pv210-usb2.c             | 3 ++-
 drivers/phy/samsung/phy-samsung-ufs.c              | 2 +-
 drivers/phy/samsung/phy-samsung-ufs.h              | 3 ++-
 drivers/phy/samsung/phy-samsung-usb2.c             | 3 ++-
 drivers/phy/samsung/phy-samsung-usb2.h             | 3 ++-
 drivers/phy/socionext/phy-uniphier-ahci.c          | 3 ++-
 drivers/phy/socionext/phy-uniphier-pcie.c          | 3 ++-
 drivers/phy/socionext/phy-uniphier-usb2.c          | 3 ++-
 drivers/phy/socionext/phy-uniphier-usb3hs.c        | 3 ++-
 drivers/phy/socionext/phy-uniphier-usb3ss.c        | 3 ++-
 drivers/phy/sophgo/phy-cv1800-usb2.c               | 3 ++-
 drivers/phy/spacemit/phy-k1-pcie.c                 | 4 ++--
 drivers/phy/spacemit/phy-k1-usb2.c                 | 3 ++-
 drivers/phy/st/phy-miphy28lp.c                     | 4 ++--
 drivers/phy/st/phy-spear1310-miphy.c               | 3 ++-
 drivers/phy/st/phy-spear1340-miphy.c               | 3 ++-
 drivers/phy/st/phy-stih407-usb.c                   | 3 ++-
 drivers/phy/st/phy-stm32-combophy.c                | 3 ++-
 drivers/phy/st/phy-stm32-usbphyc.c                 | 3 ++-
 drivers/phy/starfive/phy-jh7110-dphy-rx.c          | 3 ++-
 drivers/phy/starfive/phy-jh7110-dphy-tx.c          | 3 ++-
 drivers/phy/starfive/phy-jh7110-pcie.c             | 3 ++-
 drivers/phy/starfive/phy-jh7110-usb.c              | 3 ++-
 drivers/phy/sunplus/phy-sunplus-usb2.c             | 3 ++-
 drivers/phy/tegra/phy-tegra194-p2u.c               | 3 ++-
 drivers/phy/tegra/xusb-tegra124.c                  | 2 +-
 drivers/phy/tegra/xusb-tegra186.c                  | 2 +-
 drivers/phy/tegra/xusb-tegra210.c                  | 2 +-
 drivers/phy/tegra/xusb.c                           | 2 +-
 drivers/phy/ti/phy-am654-serdes.c                  | 3 ++-
 drivers/phy/ti/phy-da8xx-usb.c                     | 3 ++-
 drivers/phy/ti/phy-dm816x-usb.c                    | 3 ++-
 drivers/phy/ti/phy-gmii-sel.c                      | 3 ++-
 drivers/phy/ti/phy-omap-usb2.c                     | 3 ++-
 drivers/phy/ti/phy-ti-pipe3.c                      | 3 ++-
 drivers/phy/ti/phy-twl4030-usb.c                   | 3 ++-
 drivers/phy/ulpi_phy.h                             | 2 +-
 drivers/phy/xilinx/phy-zynqmp.c                    | 4 ++--
 include/linux/phy/phy-sun4i-usb.h                  | 2 +-
 include/linux/phy/tegra/xusb.h                     | 1 +
 98 files changed, 189 insertions(+), 101 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-ath79-usb.c b/drivers/phy/qualcomm/phy-ath79-usb.c
index f8d0199c6e78..2f07241be600 100644
--- a/drivers/phy/qualcomm/phy-ath79-usb.c
+++ b/drivers/phy/qualcomm/phy-ath79-usb.c
@@ -8,9 +8,10 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 struct ath79_usb_phy {
 	struct reset_control *reset;
 	/* The suspend override logic is inverted, hence the no prefix
diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
index cae290a6e19f..dd73ecbb6c1e 100644
--- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
@@ -13,7 +13,8 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 /* PHY registers */
 #define UNIPHY_PLL_REFCLK_CFG		0x000
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index 7372de05a0b8..faddba0f20c7 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-dp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -22,6 +21,8 @@
 
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-dp-phy.h"
 #include "phy-qcom-qmp-qserdes-com-v4.h"
 #include "phy-qcom-qmp-qserdes-com-v6.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index efeec4709a15..5783bdabc287 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -8,7 +8,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regmap.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 /* eUSB2 status registers */
 #define EUSB2_RPTR_STATUS		0x08
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
index da6f290af722..f1c1c2969e37 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -14,10 +14,11 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 struct ipq4019_usb_phy {
 	struct device		*dev;
 	struct phy		*phy;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
index f5eb0bdac418..d5407784c18f 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c
@@ -13,7 +13,8 @@
 #include <linux/clk.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 struct qcom_ipq806x_sata_phy {
 	void __iomem *mmio;
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
index f22c0000479f..54144f0547f0 100644
--- a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -5,13 +5,14 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
 #include <linux/bitfield.h>
 
+#include "../phy-provider.h"
+
 /* USB QSCRATCH Hardware registers */
 #define QSCRATCH_GENERAL_CFG		(0x08)
 #define HSUSB_PHY_CTRL_REG		(0x10)
diff --git a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
index 68f1ba8fec4a..9e3a911023cd 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31-eusb2.c
@@ -18,6 +18,8 @@
 
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 #define USB_PHY_UTMI_CTRL0		(0x3c)
 #define SLEEPM				BIT(0)
 
diff --git a/drivers/phy/qualcomm/phy-qcom-m31.c b/drivers/phy/qualcomm/phy-qcom-m31.c
index 168ea980fda0..1a63a5807d37 100644
--- a/drivers/phy/qualcomm/phy-qcom-m31.c
+++ b/drivers/phy/qualcomm/phy-qcom-m31.c
@@ -10,11 +10,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define USB2PHY_PORT_UTMI_CTRL1		0x40
 
 #define USB2PHY_PORT_UTMI_CTRL2		0x44
diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c
index 11a2bb958681..4c74d8e7722d 100644
--- a/drivers/phy/qualcomm/phy-qcom-pcie2.c
+++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c
@@ -8,11 +8,12 @@
 #include <linux/clk.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include <dt-bindings/phy/phy.h>
 
 #define PCIE20_PARF_PHY_STTS         0x3c
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index b9ea7d058e93..04c54c229f08 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -14,7 +14,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_graph.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -28,6 +27,8 @@
 
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index a7c65cfe31df..df38d5b6d5be 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -13,12 +13,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index fed2fc9bb311..06680151360e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -15,7 +15,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/pcie.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -24,6 +23,8 @@
 
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index e4e7966eb39a..3548b5cfa6af 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -21,6 +20,8 @@
 
 #include <ufs/unipro.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index 2bd5862c5ba8..a682b30db03e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -14,13 +14,14 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp.h"
 #include "phy-qcom-qmp-pcs-misc-v3.h"
 #include "phy-qcom-qmp-pcs-usb-v4.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index d88b8a415e85..3db0a5282dbf 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -13,13 +13,14 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index f62e1f6ecc07..b77007f8fee3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -25,6 +24,8 @@
 #include <linux/usb/typec_mux.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-common.h"
 
 #include "phy-qcom-qmp.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 191040f6d60f..e5516099b911 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -3,6 +3,7 @@
  * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -12,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -20,7 +20,7 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include "../phy-provider.h"
 
 #define QUSB2PHY_PLL			0x0
 #define QUSB2PHY_PLL_TEST		0x04
diff --git a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
index f48faa2929a6..9886500e0272 100644
--- a/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
+++ b/drivers/phy/qualcomm/phy-qcom-sgmii-eth.c
@@ -8,10 +8,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #include "phy-qcom-qmp-pcs-sgmii.h"
 #include "phy-qcom-qmp-qserdes-com-v5.h"
 #include "phy-qcom-qmp-qserdes-txrx-v5.h"
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 8915fa250e81..17a33e545008 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
@@ -18,6 +17,8 @@
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define USB2_PHY_USB_PHY_UTMI_CTRL0		(0x3c)
 #define SLEEPM					BIT(0)
 #define OPMODE_MASK				GENMASK(4, 3)
diff --git a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
index 324c0a5d658e..13828d4f788e 100644
--- a/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
+++ b/drivers/phy/qualcomm/phy-qcom-uniphy-pcie-28lp.c
@@ -12,12 +12,13 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define RST_ASSERT_DELAY_MIN_US		100
 #define RST_ASSERT_DELAY_MAX_US		150
 #define PIPE_CLK_DELAY_MIN_US		5000
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
index a52a9bf13b75..ce317deaeacb 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs-28nm.c
@@ -11,12 +11,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_graph.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 /* PHY register and bit definitions */
 #define PHY_CTRL_COMMON0		0x078
 #define SIDDQ				BIT(2)
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
index 98a18987f1be..95581926023f 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hs.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hs.c
@@ -8,11 +8,12 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/reset.h>
 #include <linux/extcon.h>
 #include <linux/notifier.h>
 
+#include "../phy-provider.h"
+
 #define ULPI_PWR_CLK_MNG_REG		0x88
 # define ULPI_PWR_OTG_COMP_DISABLE	BIT(0)
 
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
index 20f6dd37c7c1..fe9315a2f207 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c
@@ -5,12 +5,13 @@
 #include <linux/module.h>
 #include <linux/ulpi/driver.h>
 #include <linux/ulpi/regs.h>
-#include <linux/phy/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pinctrl/pinctrl-state.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 
+#include "../phy-provider.h"
+
 #define ULPI_HSIC_CFG		0x30
 #define ULPI_HSIC_IO_CAL	0x33
 
diff --git a/drivers/phy/qualcomm/phy-qcom-usb-ss.c b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
index a3a6d3ce7ea1..17ca14a0b34d 100644
--- a/drivers/phy/qualcomm/phy-qcom-usb-ss.c
+++ b/drivers/phy/qualcomm/phy-qcom-usb-ss.c
@@ -11,12 +11,13 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL0			0x6C
 #define PHY_CTRL1			0x70
 #define PHY_CTRL2			0x74
diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index a591ad95347c..4865a264136d 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -10,11 +10,12 @@
 #include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/sys_soc.h>
 
+#include "../phy-provider.h"
+
 #define RG_PE1_PIPE_REG				0x02c
 #define RG_PE1_PIPE_RST				BIT(12)
 #define RG_PE1_PIPE_CMD_FRC			BIT(4)
diff --git a/drivers/phy/ralink/phy-ralink-usb.c b/drivers/phy/ralink/phy-ralink-usb.c
index 0ff07e210769..cc61139ce157 100644
--- a/drivers/phy/ralink/phy-ralink-usb.c
+++ b/drivers/phy/ralink/phy-ralink-usb.c
@@ -14,11 +14,12 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define RT_SYSC_REG_SYSCFG1		0x014
 #define RT_SYSC_REG_CLKCFG1		0x030
 #define RT_SYSC_REG_USB_PHY_CFG		0x05c
diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c
index 248550ef98ca..a0431f11972e 100644
--- a/drivers/phy/realtek/phy-rtk-usb2.c
+++ b/drivers/phy/realtek/phy-rtk-usb2.c
@@ -16,9 +16,10 @@
 #include <linux/regmap.h>
 #include <linux/sys_soc.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
 #include <linux/usb.h>
 
+#include "../phy-provider.h"
+
 /* GUSB2PHYACCn register */
 #define PHY_NEW_REG_REQ BIT(25)
 #define PHY_VSTS_BUSY   BIT(23)
diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c
index cce453686db2..3f565c4d96be 100644
--- a/drivers/phy/realtek/phy-rtk-usb3.c
+++ b/drivers/phy/realtek/phy-rtk-usb3.c
@@ -16,9 +16,10 @@
 #include <linux/regmap.h>
 #include <linux/sys_soc.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
 #include <linux/usb.h>
 
+#include "../phy-provider.h"
+
 #define USB_MDIO_CTRL_PHY_BUSY BIT(7)
 #define USB_MDIO_CTRL_PHY_WRITE BIT(0)
 #define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8
diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c
index 6c671254c625..ca5498986120 100644
--- a/drivers/phy/renesas/phy-rcar-gen2.c
+++ b/drivers/phy/renesas/phy-rcar-gen2.c
@@ -12,11 +12,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
 #include <linux/atomic.h>
 
+#include "../phy-provider.h"
+
 #define USBHS_LPSTS			0x02
 #define USBHS_UGCTRL			0x80
 #define USBHS_UGCTRL2			0x84
diff --git a/drivers/phy/renesas/phy-rcar-gen3-pcie.c b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
index 3e2cf59ad480..747a1cd74639 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-pcie.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-pcie.c
@@ -9,11 +9,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/spinlock.h>
 
+#include "../phy-provider.h"
+
 #define PHY_CTRL		0x4000		/* R8A77980 only */
 
 /* PHY control register (PHY_CTRL) */
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 79e820e2fe55..88b4a47677a5 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -19,7 +19,6 @@
 #include <linux/mutex.h>
 #include <linux/mux/consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -29,6 +28,8 @@
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
+#include "../phy-provider.h"
+
 /******* USB2.0 Host registers (original offset is +0x200) *******/
 #define USB2_INT_ENABLE		0x000
 #define USB2_AHB_BUS_CTR	0x008
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb3.c b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
index 0420f5b283ce..3511831e95d2 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb3.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb3.c
@@ -10,10 +10,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
+#include "../phy-provider.h"
+
 #define USB30_CLKSET0		0x034
 #define USB30_CLKSET1		0x036
 #define USB30_SSC_SET		0x038
diff --git a/drivers/phy/renesas/phy-rzg3e-usb3.c b/drivers/phy/renesas/phy-rzg3e-usb3.c
index 6b3453ea0004..1c9e2276bb73 100644
--- a/drivers/phy/renesas/phy-rzg3e-usb3.c
+++ b/drivers/phy/renesas/phy-rzg3e-usb3.c
@@ -11,11 +11,12 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define USB3_TEST_RESET				0x0000
 #define USB3_TEST_UTMICTRL2			0x0b04
 #define USB3_TEST_PRMCTRL5_R			0x0c10
diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c
index c34427ac4fdb..807af518aeda 100644
--- a/drivers/phy/renesas/r8a779f0-ether-serdes.c
+++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c
@@ -10,11 +10,12 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define R8A779F0_ETH_SERDES_NUM			3
 #define R8A779F0_ETH_SERDES_OFFSET		0x0400
 #define R8A779F0_ETH_SERDES_BANK_SELECT		0x03fc
diff --git a/drivers/phy/rockchip/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c
index 592aa956eead..63e972969379 100644
--- a/drivers/phy/rockchip/phy-rockchip-dp.c
+++ b/drivers/phy/rockchip/phy-rockchip-dp.c
@@ -10,10 +10,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define GRF_SOC_CON12                           0x0274
 
 #define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK   BIT(20)
diff --git a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
index e6a768bbb9b3..de7e00580e20 100644
--- a/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
+++ b/drivers/phy/rockchip/phy-rockchip-dphy-rx0.c
@@ -21,11 +21,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define RK3399_GRF_SOC_CON9		0x6224
 #define RK3399_GRF_SOC_CON21		0x6254
 #define RK3399_GRF_SOC_CON22		0x6258
diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 5187983c58e5..fd292f063f48 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -13,10 +13,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /*
  * The higher 16-bit of this register is used for write protection
  * only if BIT(x + 16) set to 1 the BIT(x) can be written.
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
index c79fb53d8ee5..3b5d86b07564 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-csidphy.c
@@ -13,13 +13,14 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* GRF */
 #define RK1808_GRF_PD_VI_CON_OFFSET	0x0430
 
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
index 30d5e5ddff4a..5613b34958fe 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-dsidphy.c
@@ -15,13 +15,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 #include <linux/time64.h>
 
-#include <linux/phy/phy.h>
-#include <linux/phy/phy-mipi-dphy.h>
+#include "../phy-provider.h"
 
 #define UPDATE(x, h, l)	(((x) << (l)) & GENMASK((h), (l)))
 
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index 1483907413fa..a30631f0010d 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -17,9 +17,11 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_get_bus_width() */
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define UPDATE(x, h, l)		(((x) << (l)) & GENMASK((h), (l)))
 
 /* REG: 0x00 */
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 8f4c08e599aa..f88e09f61994 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -18,7 +18,6 @@
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/regmap.h>
@@ -27,6 +26,8 @@
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
+#include "../phy-provider.h"
+
 #define BIT_WRITEABLE_SHIFT	16
 #define SCHEDULE_DELAY		(60 * HZ)
 #define OTG_SCHEDULE_DELAY	(2 * HZ)
diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index b60d6bf3f33c..2deb2666acb1 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -9,12 +9,13 @@
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define BIT_WRITEABLE_SHIFT		16
 #define REF_CLOCK_24MHz			(24 * HZ_PER_MHZ)
 #define REF_CLOCK_25MHz			(25 * HZ_PER_MHZ)
diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index 126306c01454..604ff00653b0 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -13,12 +13,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
 
 #define PHY_MAX_LANE_NUM      4
 #define PHY_CFG_DATA_MASK     GENMASK(10, 7)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
index 0f69060aa5d5..78a0446b81df 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-dcphy.c
@@ -15,12 +15,13 @@
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define BIAS_CON0		0x0000
 #define I_RES_CNTL_MASK		GENMASK(6, 4)
 #define I_RES_CNTL(x)		FIELD_PREP(I_RES_CNTL_MASK, x)
diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 2d973bc37f07..80a5ffed396c 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -14,13 +14,15 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
+#include <linux/phy/phy.h> /* for phy_get_mode() */
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/rational.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define GRF_HDPTX_CON0			0x00
 #define LC_REF_CLK_SEL			BIT(11)
 #define HDPTX_I_PLL_EN			BIT(7)
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
index 4e8ffd173096..029566330aa0 100644
--- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
+++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
@@ -14,11 +14,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy/pcie.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 /* Register for RK3568 */
 #define GRF_PCIE30PHY_CON1			0x4
 #define GRF_PCIE30PHY_CON6			0x18
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 0a318ccf1bbf..4a9756ca4f68 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -43,6 +43,7 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
@@ -53,8 +54,7 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
+#include "../phy-provider.h"
 
 #define CMN_SSM_BANDGAP			(0x21 << 2)
 #define CMN_SSM_BIAS			(0x22 << 2)
diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index cef96739cf3f..0652f821332b 100644
--- a/drivers/phy/rockchip/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regulator/consumer.h>
@@ -23,6 +22,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/delay.h>
 
+#include "../phy-provider.h"
+
 static int enable_usb_uart;
 
 #define UOC_CON0					0x00
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index fba35510d88c..286f15f5eb5e 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -16,7 +16,6 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
@@ -25,6 +24,8 @@
 #include <linux/usb/typec_dp.h>
 #include <linux/usb/typec_mux.h>
 
+#include "../phy-provider.h"
+
 /* USBDP PHY Register Definitions */
 #define UDPHY_PCS				0x4000
 #define UDPHY_PMA				0x8000
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index a636dee07585..00d0ed82a620 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -12,11 +12,12 @@
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
 
+#include "../phy-provider.h"
+
 struct exynos_dp_video_phy_drvdata {
 	u32 phy_ctrl_offset;
 };
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index be925508ed97..ce8a258a104e 100644
--- a/drivers/phy/samsung/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -11,13 +11,14 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/soc/samsung/exynos-regs-pmu.h>
 #include <linux/mfd/syscon.h>
 
+#include "../phy-provider.h"
+
 enum exynos_mipi_phy_id {
 	EXYNOS_MIPI_PHY_ID_NONE = -1,
 	EXYNOS_MIPI_PHY_ID_CSIS0,
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index 53c9230c2907..9dd3a4a90fa7 100644
--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -12,9 +12,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PCIE_PHY_OFFSET(x)		((x) * 0x4)
 
 /* Sysreg FSYS register offsets and bits for Exynos5433 */
diff --git a/drivers/phy/samsung/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
index 3898a7f58217..beb2f96bebbf 100644
--- a/drivers/phy/samsung/phy-exynos4210-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4210-usb2.c
@@ -8,8 +8,9 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
index b528a5d037fe..a402f80d0aab 100644
--- a/drivers/phy/samsung/phy-exynos4x12-usb2.c
+++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c
@@ -8,8 +8,9 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 5a181cb4597e..cb476d007e3f 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -26,6 +26,8 @@
 #include <linux/usb/typec.h>
 #include <linux/usb/typec_mux.h>
 
+#include "../phy-provider.h"
+
 /* Exynos USB PHY registers */
 #define EXYNOS5_FSEL_9MHZ6		0x0
 #define EXYNOS5_FSEL_10MHZ		0x1
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 595adba5fb8f..0f85ae0a5901 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -15,12 +15,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/mfd/syscon.h>
 
+#include "../phy-provider.h"
+
 #define SATAPHY_CONTROL_OFFSET		0x0724
 #define EXYNOS5_SATAPHY_PMU_ENABLE	BIT(0)
 #define EXYNOS5_SATA_RESET		0x4
diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
index 21b06072f866..04815633f290 100644
--- a/drivers/phy/samsung/phy-exynos5250-usb2.c
+++ b/drivers/phy/samsung/phy-exynos5250-usb2.c
@@ -8,8 +8,9 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
index 32be62e49804..4d72559d29a9 100644
--- a/drivers/phy/samsung/phy-s5pv210-usb2.c
+++ b/drivers/phy/samsung/phy-s5pv210-usb2.c
@@ -8,7 +8,8 @@
 
 #include <linux/delay.h>
 #include <linux/io.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 /* Exynos USB PHY registers */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
index b09a35ab6acd..9012c4dd403a 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.c
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -15,10 +15,10 @@
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
 #include "phy-samsung-ufs.h"
 
 #define for_each_phy_lane(phy, i) \
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
index f2c2e744e5ba..90f4d4cef631 100644
--- a/drivers/phy/samsung/phy-samsung-ufs.h
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -10,9 +10,10 @@
 #ifndef _PHY_SAMSUNG_UFS_
 #define _PHY_SAMSUNG_UFS_
 
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PHY_COMN_BLK	1
 #define PHY_TRSV_BLK	2
 #define END_UFS_PHY_CFG { 0 }
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index d2749b67cf8f..724c5cf2cd5c 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -10,9 +10,10 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/spinlock.h>
+
+#include "../phy-provider.h"
 #include "phy-samsung-usb2.h"
 
 static int samsung_usb2_phy_power_on(struct phy *phy)
diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
index ebaf43bfc5a2..515c7938fccd 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.h
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
@@ -10,12 +10,13 @@
 #define _PHY_EXYNOS_USB2_H
 
 #include <linux/clk.h>
-#include <linux/phy/phy.h>
 #include <linux/device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 #define KHZ 1000
 #define MHZ (KHZ * KHZ)
 
diff --git a/drivers/phy/socionext/phy-uniphier-ahci.c b/drivers/phy/socionext/phy-uniphier-ahci.c
index 28cf3efe0695..6b3ce56c7f0c 100644
--- a/drivers/phy/socionext/phy-uniphier-ahci.c
+++ b/drivers/phy/socionext/phy-uniphier-ahci.c
@@ -12,10 +12,11 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 struct uniphier_ahciphy_priv {
 	struct device *dev;
 	void __iomem  *base;
diff --git a/drivers/phy/socionext/phy-uniphier-pcie.c b/drivers/phy/socionext/phy-uniphier-pcie.c
index c19173492b79..00f6cdf846f1 100644
--- a/drivers/phy/socionext/phy-uniphier-pcie.c
+++ b/drivers/phy/socionext/phy-uniphier-pcie.c
@@ -12,12 +12,13 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/resource.h>
 
+#include "../phy-provider.h"
+
 /* PHY */
 #define PCL_PHY_CLKCTRL		0x0000
 #define PORT_SEL_MASK		GENMASK(11, 9)
diff --git a/drivers/phy/socionext/phy-uniphier-usb2.c b/drivers/phy/socionext/phy-uniphier-usb2.c
index c49d432e526b..6ee566478be0 100644
--- a/drivers/phy/socionext/phy-uniphier-usb2.c
+++ b/drivers/phy/socionext/phy-uniphier-usb2.c
@@ -10,11 +10,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 
+#include "../phy-provider.h"
+
 #define SG_USBPHY1CTRL		0x500
 #define SG_USBPHY1CTRL2		0x504
 #define SG_USBPHY2CTRL		0x508
diff --git a/drivers/phy/socionext/phy-uniphier-usb3hs.c b/drivers/phy/socionext/phy-uniphier-usb3hs.c
index 8c8673df0084..a08db863223f 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3hs.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3hs.c
@@ -17,12 +17,13 @@
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 #define HSPHY_CFG0		0x0
 #define HSPHY_CFG0_HS_I_MASK	GENMASK(31, 28)
 #define HSPHY_CFG0_HSDISC_MASK	GENMASK(27, 26)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index f402ed8732fd..8829305e9d4c 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -16,11 +16,12 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define SSPHY_TESTI		0x0
 #define TESTI_DAT_MASK		GENMASK(13, 6)
 #define TESTI_ADR_MASK		GENMASK(5, 1)
diff --git a/drivers/phy/sophgo/phy-cv1800-usb2.c b/drivers/phy/sophgo/phy-cv1800-usb2.c
index 6fe846534e9c..1fd7bba498ad 100644
--- a/drivers/phy/sophgo/phy-cv1800-usb2.c
+++ b/drivers/phy/sophgo/phy-cv1800-usb2.c
@@ -12,10 +12,11 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
 
+#include "../phy-provider.h"
+
 #define REG_USB_PHY_CTRL		0x048
 
 #define PHY_VBUS_POWER_EN		BIT(0)
diff --git a/drivers/phy/spacemit/phy-k1-pcie.c b/drivers/phy/spacemit/phy-k1-pcie.c
index 75477bea7f70..6f8f2f39f7f8 100644
--- a/drivers/phy/spacemit/phy-k1-pcie.c
+++ b/drivers/phy/spacemit/phy-k1-pcie.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2025 by RISCstar Solutions Corporation.  All rights reserved.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
@@ -12,12 +13,11 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 /*
  * Three PCIe ports are supported in the SpacemiT K1 SoC, and this driver
diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c
index 01af310d6683..c897d80de41a 100644
--- a/drivers/phy/spacemit/phy-k1-usb2.c
+++ b/drivers/phy/spacemit/phy-k1-usb2.c
@@ -9,11 +9,12 @@
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/iopoll.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
 
+#include "../phy-provider.h"
+
 #define PHY_RST_MODE_CTRL		0x04
 #define  PHY_PLL_RDY			BIT(0)
 #define  PHY_CLK_CDR_EN			BIT(1)
diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c
index 43cef89af55e..e9792deb629a 100644
--- a/drivers/phy/st/phy-miphy28lp.c
+++ b/drivers/phy/st/phy-miphy28lp.c
@@ -7,6 +7,7 @@
  * Author: Alexandre Torgue <alexandre.torgue@st.com>
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -16,13 +17,12 @@
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
 #include <linux/clk.h>
-#include <linux/phy/phy.h>
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 /* MiPHY registers */
 #define MIPHY_CONF_RESET		0x00
diff --git a/drivers/phy/st/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c
index c661ab63505f..86acc2412c46 100644
--- a/drivers/phy/st/phy-spear1310-miphy.c
+++ b/drivers/phy/st/phy-spear1310-miphy.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* SPEAr1310 Registers */
 #define SPEAR1310_PCIE_SATA_CFG			0x3A4
 	#define SPEAR1310_PCIE_SATA2_SEL_PCIE		(0 << 31)
diff --git a/drivers/phy/st/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c
index 85a60d64ebb7..4dbd3158c060 100644
--- a/drivers/phy/st/phy-spear1340-miphy.c
+++ b/drivers/phy/st/phy-spear1340-miphy.c
@@ -14,10 +14,11 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* SPEAr1340 Registers */
 /* Power Management Registers */
 #define SPEAR1340_PCM_CFG			0x100
diff --git a/drivers/phy/st/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c
index 7a3e4584895c..497f9aa4139d 100644
--- a/drivers/phy/st/phy-stih407-usb.c
+++ b/drivers/phy/st/phy-stih407-usb.c
@@ -16,7 +16,8 @@
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
+
+#include "../phy-provider.h"
 
 #define PHYPARAM_REG	0
 #define PHYCTRL_REG	1
diff --git a/drivers/phy/st/phy-stm32-combophy.c b/drivers/phy/st/phy-stm32-combophy.c
index 607b4d607eb5..8757b1993e90 100644
--- a/drivers/phy/st/phy-stm32-combophy.c
+++ b/drivers/phy/st/phy-stm32-combophy.c
@@ -10,12 +10,13 @@
 #include <linux/clk.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
-#include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <dt-bindings/phy/phy.h>
 
+#include "../phy-provider.h"
+
 #define SYSCFG_COMBOPHY_CR1 0x4c00
 #define SYSCFG_COMBOPHY_CR2 0x4c04
 #define SYSCFG_COMBOPHY_CR4 0x4c0c
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index b44afbff8616..553db62f7005 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -13,11 +13,12 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 #include <linux/units.h>
 
+#include "../phy-provider.h"
+
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
 #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100))
diff --git a/drivers/phy/starfive/phy-jh7110-dphy-rx.c b/drivers/phy/starfive/phy-jh7110-dphy-rx.c
index 0b039e1f71c5..099a1ebf6194 100644
--- a/drivers/phy/starfive/phy-jh7110-dphy-rx.c
+++ b/drivers/phy/starfive/phy-jh7110-dphy-rx.c
@@ -13,11 +13,12 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define STF_DPHY_APBCFGSAIF_SYSCFG(x)		(x)
 
 #define STF_DPHY_ENABLE_CLK			BIT(6)
diff --git a/drivers/phy/starfive/phy-jh7110-dphy-tx.c b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
index c64d1c91b130..a5faf06b6d14 100644
--- a/drivers/phy/starfive/phy-jh7110-dphy-tx.c
+++ b/drivers/phy/starfive/phy-jh7110-dphy-tx.c
@@ -15,12 +15,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define STF_DPHY_APBIFSAIF_SYSCFG(x)			(x)
 
 #define STF_DPHY_AON_POWER_READY_N_ACTIVE		0
diff --git a/drivers/phy/starfive/phy-jh7110-pcie.c b/drivers/phy/starfive/phy-jh7110-pcie.c
index 734c8e007727..d68d396ac3cc 100644
--- a/drivers/phy/starfive/phy-jh7110-pcie.c
+++ b/drivers/phy/starfive/phy-jh7110-pcie.c
@@ -12,10 +12,11 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/mfd/syscon.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PCIE_KVCO_LEVEL_OFF		0x28
 #define PCIE_USB3_PHY_PLL_CTL_OFF	0x7c
 #define PCIE_KVCO_TUNE_SIGNAL_OFF	0x80
diff --git a/drivers/phy/starfive/phy-jh7110-usb.c b/drivers/phy/starfive/phy-jh7110-usb.c
index b505d89860b4..5762586e5c7d 100644
--- a/drivers/phy/starfive/phy-jh7110-usb.c
+++ b/drivers/phy/starfive/phy-jh7110-usb.c
@@ -12,11 +12,12 @@
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/usb/of.h>
 
+#include "../phy-provider.h"
+
 #define USB_125M_CLK_RATE		125000000
 #define USB_CLK_MODE_OFF		0x0
 #define USB_CLK_MODE_RX_NORMAL_PWR	BIT(1)
diff --git a/drivers/phy/sunplus/phy-sunplus-usb2.c b/drivers/phy/sunplus/phy-sunplus-usb2.c
index 637a5fbae6d9..2ddbc37d09ee 100644
--- a/drivers/phy/sunplus/phy-sunplus-usb2.c
+++ b/drivers/phy/sunplus/phy-sunplus-usb2.c
@@ -17,10 +17,11 @@
 #include <linux/module.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/reset.h>
 
+#include "../phy-provider.h"
+
 #define HIGH_MASK_BITS				GENMASK(31, 16)
 #define LOW_MASK_BITS				GENMASK(15, 0)
 #define OTP_DISC_LEVEL_DEFAULT			0xd
diff --git a/drivers/phy/tegra/phy-tegra194-p2u.c b/drivers/phy/tegra/phy-tegra194-p2u.c
index f49b417c9eb6..467b6b97e53d 100644
--- a/drivers/phy/tegra/phy-tegra194-p2u.c
+++ b/drivers/phy/tegra/phy-tegra194-p2u.c
@@ -11,9 +11,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
+#include "../phy-provider.h"
+
 #define P2U_CONTROL_CMN			0x74
 #define P2U_CONTROL_CMN_ENABLE_L2_EXIT_RATE_CHANGE		BIT(13)
 #define P2U_CONTROL_CMN_SKP_SIZE_PROTECTION_EN			BIT(20)
diff --git a/drivers/phy/tegra/xusb-tegra124.c b/drivers/phy/tegra/xusb-tegra124.c
index 70b6213370a8..21686c6fb2d7 100644
--- a/drivers/phy/tegra/xusb-tegra124.c
+++ b/drivers/phy/tegra/xusb-tegra124.c
@@ -8,7 +8,6 @@
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -16,6 +15,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 #define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? 15 : 0)
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 1ddf11265974..e017cb1ff484 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -7,7 +7,6 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -15,6 +14,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 /* FUSE USB_CALIB registers */
diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 1abc5913ec49..006aba47b93d 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -21,6 +20,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 #define FUSE_SKU_CALIB_HS_CURR_LEVEL_PADX_SHIFT(x) \
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index 9d74c0ecc31b..07a2f5a4dbee 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <linux/phy/phy.h>
 #include <linux/phy/tegra/xusb.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
@@ -19,6 +18,7 @@
 
 #include <soc/tegra/fuse.h>
 
+#include "../phy-provider.h"
 #include "xusb.h"
 
 static struct phy *tegra_xusb_pad_of_xlate(struct device *dev,
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 5b6c27aa7e8b..8990b715525e 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -15,11 +15,12 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mux/consumer.h>
 #include <linux/of_address.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define CMU_R004		0x4
 #define CMU_R060		0x60
 #define CMU_R07C		0x7c
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index 62fa6f89c0e6..261b65abd38b 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -11,12 +11,13 @@
 #include <linux/mfd/da8xx-cfgchip.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_data/phy-da8xx-usb.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define PHY_INIT_BITS	(CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN)
 
 struct da8xx_usb_phy {
diff --git a/drivers/phy/ti/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
index d274831b731c..515ef7812bde 100644
--- a/drivers/phy/ti/phy-dm816x-usb.c
+++ b/drivers/phy/ti/phy-dm816x-usb.c
@@ -12,10 +12,11 @@
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/delay.h>
-#include <linux/phy/phy.h>
 
 #include <linux/mfd/syscon.h>
 
+#include "../phy-provider.h"
+
 /*
  * TRM has two sets of USB_CTRL registers.. The correct register bits
  * are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index 6213c2b6005a..ce7dc692d7be 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -14,9 +14,10 @@
 #include <linux/of_address.h>
 #include <linux/of_net.h>
 #include <linux/phy.h>
-#include <linux/phy/phy.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 /* AM33xx SoC specific definitions for the CONTROL port */
 #define AM33XX_GMII_SEL_MODE_MII	0
 #define AM33XX_GMII_SEL_MODE_RMII	1
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 1eb252604441..318f51d09c28 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/phy/omap_usb.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
@@ -25,6 +24,8 @@
 #include <linux/sys_soc.h>
 #include <linux/usb/phy_companion.h>
 
+#include "../phy-provider.h"
+
 #define USB2PHY_ANA_CONFIG1		0x4c
 #define USB2PHY_DISCON_BYP_LATCH	BIT(31)
 
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index b5543b5c674c..d63c8e872d5b 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -10,7 +10,6 @@
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/slab.h>
-#include <linux/phy/phy.h>
 #include <linux/of.h>
 #include <linux/clk.h>
 #include <linux/err.h>
@@ -22,6 +21,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#include "../phy-provider.h"
+
 #define	PLL_STATUS		0x00000004
 #define	PLL_GO			0x00000008
 #define	PLL_CONFIGURATION1	0x0000000C
diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
index a26aec3ab29e..67c9883691fc 100644
--- a/drivers/phy/ti/phy-twl4030-usb.c
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -20,7 +20,6 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
-#include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/ulpi.h>
@@ -29,6 +28,8 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
+#include "../phy-provider.h"
+
 /* Register defines */
 
 #define MCPC_CTRL			0x30
diff --git a/drivers/phy/ulpi_phy.h b/drivers/phy/ulpi_phy.h
index 7054b440347c..717c3fb3fa38 100644
--- a/drivers/phy/ulpi_phy.h
+++ b/drivers/phy/ulpi_phy.h
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/phy/phy.h>
+#include "phy-provider.h"
 
 /**
  * Helper that registers PHY for a ULPI device and adds a lookup for binding it
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index fe6b4925d166..db40594622da 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -12,6 +12,7 @@
  * PCIe should also work but that is experimental as of now.
  */
 
+#include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
@@ -19,12 +20,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/phy/phy.h>
+#include "../phy-provider.h"
 
 /*
  * Lane Registers
diff --git a/include/linux/phy/phy-sun4i-usb.h b/include/linux/phy/phy-sun4i-usb.h
index f3e7b13608e4..66612be0dac5 100644
--- a/include/linux/phy/phy-sun4i-usb.h
+++ b/include/linux/phy/phy-sun4i-usb.h
@@ -6,7 +6,7 @@
 #ifndef PHY_SUN4I_USB_H_
 #define PHY_SUN4I_USB_H_
 
-#include "phy.h"
+struct phy;
 
 /**
  * sun4i_usb_phy_set_squelch_detect() - Enable/disable squelch detect
diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h
index 6ca51e0080ec..e6c613f9bef2 100644
--- a/include/linux/phy/tegra/xusb.h
+++ b/include/linux/phy/tegra/xusb.h
@@ -8,6 +8,7 @@
 
 struct tegra_xusb_padctl;
 struct device;
+struct phy;
 enum usb_device_speed;
 
 struct tegra_xusb_padctl *tegra_xusb_padctl_get(struct device *dev);
-- 
2.34.1

[PATCH v8 phy-next 31/31] MAINTAINERS: add regexes for linux-phy

[Vladimir Oltean]

Some pragmatic shortcuts are being taken by PHY consumer driver authors,
which put a burden on the framework. A lot of these can be caught during
review.

Make sure the linux-phy list is copied on as many keywords that regexes
can reasonably catch.

Some considerations that led to this solution and not a simpler one:
- Consumers may be located anywhere, and their file naming provides no
  indication whatsoever that they are PHY API consumers.
- The network PHY API has similarly sounding API: phy_start(),
  phy_connect(), etc. Similarly, matching on "phy" would hit
  phys_addr_t, "cryptography", etc.
- The header files themselves need attention to avoid matching on
  include/linux/phy.h (network PHY), include/linux/usb/phy.h,
  drivers/net/vendor/device/phy.h, etc.
- At least for a transitional period, I suppose developers will still
  try to add PHY providers outside the subsystem (which is discouraged).

So I used \b to try to match on actual word boundaries and I went for
listing all markers of PHY API use as they may appear in patch contexts.

Bit rot is a valid concern. I will add a test to the build automation
that newly introduced struct and function names in include/linux/phy.h,
include/linux/phy-props.h and drivers/phy/phy-provider.h are matched by
the MAINTAINERS entry K: patterns.

The keyword patterns were written with great help from Joe Perches
<joe@perches.com>.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
Cc: Joe Perches <joe@perches.com>

v7->v8: match phy_request_bus_width()
v3->v7: none
v2->v3:
- escape forward slash in linux/phy/phy.h in regex pattern:
  https://lore.kernel.org/linux-phy/9fd14d166e860f26febfbc9061a6dcae6a166961.camel@perches.com/
v1->v2:
- split into multiple regex patterns
- use matching-only (insted of capturing) regex patterns
- adjust commit message to reflect the Q&A from v1
---
 MAINTAINERS | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2fb1c75afd16..67318abfd91c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10799,6 +10799,18 @@ F:	Documentation/devicetree/bindings/phy/
 F:	drivers/phy/
 F:	include/dt-bindings/phy/
 F:	include/linux/phy/
+K:	(?:linux\/phy\/phy\.h|phy-props\.h|phy-provider\.h)
+K:	\b(?:__)?(?:devm_)?(?:of_)?phy_(?:create|destroy|provider_(?:un)?register)\b
+K:	\bphy_(?:create|remove)_lookup\b
+K:	\bphy_(?:get|set)_drvdata\b
+K:	\b(?:devm_)?(?:of_)?phy_(?:optional_)?(?:get|put)(?:_by_index)?\b
+K:	\bphy_pm_runtime_(?:get|put)(?:_sync)?\b
+K:	\bphy_(?:init|exit|power_(?:on|off))\b
+K:	\bphy_(?:get|set)_(?:mode(?:_ext)?|media|speed|max_link_rate)\b
+K:	\bphy_(?:get|set|request)_bus_width\b
+K:	\bphy_(?:reset|configure|validate|calibrate)\b
+K:	\bphy_notify_(?:connect|disconnect|state)\b
+K:	\bstruct\s+phy(?:_ops|_attrs|_lookup|_provider)?\b
 
 GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
-- 
2.34.1