From: Richard Zhu <hongxing.zhu@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
frank.li@nxp.com, s.hauer@pengutronix.de, festevam@gmail.com
Cc: kernel@pengutronix.de, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v9 0/3] Add i.MX943 PCIe supports
Date: Wed, 6 May 2026 13:53:13 +0800 [thread overview]
Message-ID: <20260506055316.2798693-1-hongxing.zhu@nxp.com> (raw)
This patch-set adds i.MX943 PCIe supports on EVK board. Please pay
attention to that it relies on the patch-set[1], and the PCIe1 port on
the EVK board relies on the [2].
Both of them are included in the v7.0 kernel.
[1] https://lore.kernel.org/imx/176649331066.523506.9443864112044699350.b4-ty@kernel.org/
[2] https://lore.kernel.org/imx/inzg46tc2fwsajxq4vzdyuiq7krzy6xtcg2mjaieninz7zsmgm@mtdjr4tuegpq/
Changes in v9:
- Since the dt-binding changes have been merged, only the DTS changes are
being resent after rebasing to v7.1-rc1.
Note: The corresponding changes will be updated later after the following
two patch sets are merged, as suggested by Mani:
- [PATCH V14 00/12] pci-imx6: Add support for parsing the reset property in new Root Port binding
- [PATCH V2 0/8] PCI: imx6: Integrate pwrctrl API and update device trees
Changes in v8:
- Drop the redundant strings since they are compatible with i.MX95.
Changes in v7:
- Fix the checkpatch.pl warning in the first patch. Sorry for not
understanding the comments provided by Krzysztof in the v4 patch-set.
- Adjust the compatible strings in alphabetical order.
Changes in v6:
- Let i.MX94 and i.MX943 EP mode compatible strings fallback to i.MX95 EP
mode complatible string too.
- Add missing space after "=" in pcie0_ep node.
Changes in v5:
- Add Reviewed-by tag in first patch.
- Add i.MX94/i.MX943 compatible strings.
- Add "dma" irq for i.MX94/i.MX943 PCIe.
- Add 'fsl,max-link-speed = <3>;' back. Because that Link speed is decided
by pcie_link_speed[pci->max_link_speed]; Found it when one Gen3 NVME SSD is
used in the tests.
Changes in v4:
- Add missing space after comma or '='.
- Remove 'fsl,max-link-speed = <3>;' in dts, since it's not required anymore.
Changes in v3:
- Fix build warning in the dtbs_check.
Changes in v2:
- Refine the nodes sequence refer to Frank's comments.
- Rely on [3], and remove the duplacated codes mentioned by Sherry.
[3] https://patchwork.kernel.org/project/imx/patch/20260204022306.2372889-1-sherry.sun@nxp.com/
[PATCH v9 1/3] arm64: dts: imx94: Add pcie0 and pcie0-ep supports
[PATCH v9 2/3] arm64: dts: imx943: Add pcie1 and pcie1-ep supports
[PATCH v9 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1]
arch/arm64/boot/dts/freescale/Makefile | 4 ++++
arch/arm64/boot/dts/freescale/imx94.dtsi | 88 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943-evk.dts | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx943.dtsi | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 250 insertions(+)
next reply other threads:[~2026-05-06 5:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 5:53 Richard Zhu [this message]
2026-05-06 5:53 ` [PATCH v9 1/3] arm64: dts: imx94: Add pcie0 and pcie0-ep supports Richard Zhu
2026-05-06 5:53 ` [PATCH v9 2/3] arm64: dts: imx943: Add pcie1 and pcie1-ep supports Richard Zhu
2026-05-06 5:53 ` [PATCH v9 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support Richard Zhu
2026-05-06 14:59 ` [PATCH v9 0/3] Add i.MX943 PCIe supports Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260506055316.2798693-1-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frank.li@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox