From: Richard Zhu <hongxing.zhu@nxp.com>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
frank.li@nxp.com, s.hauer@pengutronix.de, festevam@gmail.com
Cc: kernel@pengutronix.de, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v9 3/3] arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support
Date: Wed, 6 May 2026 13:53:16 +0800 [thread overview]
Message-ID: <20260506055316.2798693-4-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <20260506055316.2798693-1-hongxing.zhu@nxp.com>
Add pcie[0,1] and pcie-ep[0,1] support.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
arch/arm64/boot/dts/freescale/Makefile | 4 +
arch/arm64/boot/dts/freescale/imx943-evk.dts | 83 ++++++++++++++++++++
2 files changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 711e36cc2c990..c41fd70e667d3 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -520,6 +520,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-ivy.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-wifi-yavia.dtb
+imx943-evk-pcie0-ep-dtbs += imx943-evk.dtb imx-pcie0-ep.dtbo
+imx943-evk-pcie1-ep-dtbs += imx943-evk.dtb imx-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx943-evk-pcie0-ep.dtb imx943-evk-pcie1-ep.dtb
+
imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
imx95-19x19-evk-pcie0-ep-dtbs += imx95-19x19-evk.dtb imx-pcie0-ep.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx943-evk.dts b/arch/arm64/boot/dts/freescale/imx943-evk.dts
index 52f7ef7dbf272..fe4fc512d95d4 100644
--- a/arch/arm64/boot/dts/freescale/imx943-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx943-evk.dts
@@ -58,6 +58,20 @@ chosen {
stdout-path = &lpuart1;
};
+ pcie_ref_clk: clock-pcie-ref {
+ compatible = "gpio-gate-clock";
+ clocks = <&xtal25m>;
+ #clock-cells = <0>;
+ enable-gpios = <&pca9670_i2c3 7 GPIO_ACTIVE_LOW>;
+ };
+
+ xtal25m: clock-xtal25m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "xtal_25MHz";
+ };
+
dmic: dmic {
compatible = "dmic-codec";
#sound-dai-cells = <0>;
@@ -79,6 +93,15 @@ reg_m2_pwr: regulator-m2-pwr {
startup-delay-us = <5000>;
};
+ reg_slot_pwr: regulator-slot-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "PCIe slot-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pcal6416_i2c3_u46 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_m2_wlan: regulator-wlan {
compatible = "regulator-fixed";
regulator-name = "WLAN_EN";
@@ -725,6 +748,18 @@ IMX94_PAD_GPIO_IO28__LPI2C6_SCL 0x40000b9e
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO20__PCIE1_CLKREQ_B 0x4000031e
+ >;
+ };
+
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <
+ IMX94_PAD_GPIO_IO23__PCIE2_CLKREQ_B 0x4000031e
+ >;
+ };
+
pinctrl_pdm: pdmgrp {
fsl,pins = <
IMX94_PAD_PDM_CLK__PDM_CLK 0x31e
@@ -988,6 +1023,54 @@ pf5302_crit: trip1 {
};
};
+&pcie0 {
+ pinctrl-0 = <&pinctrl_pcie0>;
+ pinctrl-names = "default";
+ clocks = <&scmi_clk IMX94_CLK_HSIO>,
+ <&scmi_clk IMX94_CLK_HSIOPLL>,
+ <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+ <&hsio_blk_ctl 0>,
+ <&pcie_ref_clk>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+ "ref", "extref";
+ reset-gpio = <&pcal6416_i2c3_u46 3 GPIO_ACTIVE_LOW>;
+ vpcie3v3aux-supply = <®_m2_wlan>;
+ supports-clkreq;
+ status = "okay";
+};
+
+&pcie0_ep {
+ pinctrl-0 = <&pinctrl_pcie0>;
+ pinctrl-names = "default";
+ vpcie-supply = <®_m2_wlan>;
+ status = "disabled";
+};
+
+&pcie1 {
+ pinctrl-0 = <&pinctrl_pcie1>;
+ pinctrl-names = "default";
+ clocks = <&scmi_clk IMX94_CLK_HSIO>,
+ <&scmi_clk IMX94_CLK_HSIOPLL>,
+ <&scmi_clk IMX94_CLK_HSIOPLL_VCO>,
+ <&scmi_clk IMX94_CLK_HSIOPCIEAUX>,
+ <&hsio_blk_ctl 0>,
+ <&pcie_ref_clk>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux",
+ "ref", "extref";
+ reset-gpio = <&pcal6416_i2c3_u46 1 GPIO_ACTIVE_LOW>;
+ vpcie3v3aux-supply = <®_slot_pwr>;
+ supports-clkreq;
+ status = "okay";
+};
+
+&pcie1_ep {
+ pinctrl-0 = <&pinctrl_pcie1>;
+ pinctrl-names = "default";
+ vpcie-supply = <®_slot_pwr>;
+ status = "disabled";
+};
+
&usb2 {
dr_mode = "otg";
disable-over-current;
--
2.37.1
next prev parent reply other threads:[~2026-05-06 5:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 5:53 [PATCH v9 0/3] Add i.MX943 PCIe supports Richard Zhu
2026-05-06 5:53 ` [PATCH v9 1/3] arm64: dts: imx94: Add pcie0 and pcie0-ep supports Richard Zhu
2026-05-06 5:53 ` [PATCH v9 2/3] arm64: dts: imx943: Add pcie1 and pcie1-ep supports Richard Zhu
2026-05-06 5:53 ` Richard Zhu [this message]
2026-05-06 14:59 ` [PATCH v9 0/3] Add i.MX943 PCIe supports Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260506055316.2798693-4-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frank.li@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox