[PATCH v2 5/8] PCI: dwc: Use common pcie_wait_after_link_train() helper

[Hans Zhang <18255117159@163.com>]

The DWC driver already implements the 100 ms delay required by PCIe
r6.0 sec 6.6.1 by checking pci->max_link_speed and calling msleep(100).

Replace the open-coded msleep() with the new common helper
pcie_wait_after_link_train() to reduce code duplication and improve
maintainability. No functional change intended.

Signed-off-by: Hans Zhang <18255117159@163.com>
---
 drivers/pci/controller/dwc/pcie-designware.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index c11cf61b8319..e5808d4b3867 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -799,13 +799,7 @@ int dw_pcie_wait_for_link(struct dw_pcie *pci)
 		return -ETIMEDOUT;
 	}
 
-	/*
-	 * As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link
-	 * speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms
-	 * after Link training completes before sending a Configuration Request.
-	 */
-	if (pci->max_link_speed > 2)
-		msleep(PCIE_RESET_CONFIG_WAIT_MS);
+	pcie_wait_after_link_train(pci->max_link_speed);
 
 	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	val = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
-- 
2.34.1