From: <a-christidis@ti.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
"Santosh Shilimkar" <ssantosh@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney@redhat.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>,
Michael Walle <mwalle@kernel.org>,
Kevin Hilman <khilman@baylibre.com>, Randolph Sapp <rs@ti.com>,
Antonios Christidis <a-christidis@ti.com>
Subject: [PATCH v2] clk: keystone: don't cache clock rate
Date: Thu, 7 May 2026 11:09:34 -0500 [thread overview]
Message-ID: <20260507-clk-sci-v2-1-38f59b48777a@ti.com> (raw)
From: Michael Walle <mwalle@kernel.org>
The TISCI firmware will return 0 if the clock or consumer is not
enabled although there is a stored value in the firmware. IOW a call to
set rate will work but at get rate will always return 0 if the clock is
disabled.
The clk framework will try to cache the clock rate when it's requested
by a consumer. If the clock or consumer is not enabled at that point,
the cached value is 0, which is wrong. Thus, disable the cache
altogether.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Antonios Christidis <a-christidis@ti.com>
---
v2:
- Resent as part of series [1], separated from series per reviewer feedback [2]
- Original patch was sent here [3]
[1]: https://lore.kernel.org/all/20260224-gpu_dts-v1-5-cc5ddffe140c@ti.com/
[2]: https://lore.kernel.org/all/20260225010507.flvt775fs5kfe7ez@unknotted/
[3]: https://lore.kernel.org/all/20260109120728.2wku6akxof2ddn4h@tastiness/
---
drivers/clk/keystone/sci-clk.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index 9d5071223f4c..0a1565fdbb3b 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -333,6 +333,14 @@ static int _sci_clk_build(struct sci_clk_provider *provider,
init.ops = &sci_clk_ops;
init.num_parents = sci_clk->num_parents;
+
+ /*
+ * A clock rate query to the SCI firmware will return 0 if either the
+ * clock itself is disabled or the attached device/consumer is disabled.
+ * This makes it inherently unsuitable for the caching of the clk
+ * framework.
+ */
+ init.flags = CLK_GET_RATE_NOCACHE;
sci_clk->hw.init = &init;
ret = devm_clk_hw_register(provider->dev, &sci_clk->hw);
---
base-commit: 17c7841d09ee7d33557fd075562d9289b6018c90
change-id: 20260507-clk-sci-175f398ecdc0
Best regards,
--
Antonios Christidis <a-christidis@ti.com>
next reply other threads:[~2026-05-07 16:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 16:09 a-christidis [this message]
2026-05-11 14:36 ` [PATCH v2] clk: keystone: don't cache clock rate Brian Masney
2026-05-12 10:48 ` Nishanth Menon
2026-05-12 14:51 ` Brian Masney
2026-05-12 17:16 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260507-clk-sci-v2-1-38f59b48777a@ti.com \
--to=a-christidis@ti.com \
--cc=bmasney@redhat.com \
--cc=khilman@baylibre.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=mwalle@kernel.org \
--cc=nm@ti.com \
--cc=rs@ti.com \
--cc=sboyd@kernel.org \
--cc=ssantosh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox