* [PATCH v2] clk: keystone: don't cache clock rate
@ 2026-05-07 16:09 a-christidis
0 siblings, 0 replies; only message in thread
From: a-christidis @ 2026-05-07 16:09 UTC (permalink / raw)
To: Nishanth Menon, Tero Kristo, Santosh Shilimkar, Michael Turquette,
Stephen Boyd, Brian Masney
Cc: linux-arm-kernel, linux-kernel, linux-clk, Michael Walle,
Kevin Hilman, Randolph Sapp, Antonios Christidis
From: Michael Walle <mwalle@kernel.org>
The TISCI firmware will return 0 if the clock or consumer is not
enabled although there is a stored value in the firmware. IOW a call to
set rate will work but at get rate will always return 0 if the clock is
disabled.
The clk framework will try to cache the clock rate when it's requested
by a consumer. If the clock or consumer is not enabled at that point,
the cached value is 0, which is wrong. Thus, disable the cache
altogether.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Antonios Christidis <a-christidis@ti.com>
---
v2:
- Resent as part of series [1], separated from series per reviewer feedback [2]
- Original patch was sent here [3]
[1]: https://lore.kernel.org/all/20260224-gpu_dts-v1-5-cc5ddffe140c@ti.com/
[2]: https://lore.kernel.org/all/20260225010507.flvt775fs5kfe7ez@unknotted/
[3]: https://lore.kernel.org/all/20260109120728.2wku6akxof2ddn4h@tastiness/
---
drivers/clk/keystone/sci-clk.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/clk/keystone/sci-clk.c b/drivers/clk/keystone/sci-clk.c
index 9d5071223f4c..0a1565fdbb3b 100644
--- a/drivers/clk/keystone/sci-clk.c
+++ b/drivers/clk/keystone/sci-clk.c
@@ -333,6 +333,14 @@ static int _sci_clk_build(struct sci_clk_provider *provider,
init.ops = &sci_clk_ops;
init.num_parents = sci_clk->num_parents;
+
+ /*
+ * A clock rate query to the SCI firmware will return 0 if either the
+ * clock itself is disabled or the attached device/consumer is disabled.
+ * This makes it inherently unsuitable for the caching of the clk
+ * framework.
+ */
+ init.flags = CLK_GET_RATE_NOCACHE;
sci_clk->hw.init = &init;
ret = devm_clk_hw_register(provider->dev, &sci_clk->hw);
---
base-commit: 17c7841d09ee7d33557fd075562d9289b6018c90
change-id: 20260507-clk-sci-175f398ecdc0
Best regards,
--
Antonios Christidis <a-christidis@ti.com>
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-05-07 16:10 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-07 16:09 [PATCH v2] clk: keystone: don't cache clock rate a-christidis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox