[PATCH 0/2] Khadas VIM4 PWM status LED support

[PATCH 0/2] Khadas VIM4 PWM status LED support

[Ronald Claveau via B4 Relay]

This series adds support for the PWM-driven status LED on the Khadas
VIM4 board (Amlogic T7).

The VIM4 exposes a heartbeat LED wired to the PWM_AO_C output, routed
through pin group pwm_ao_c_d. Before wiring it up in the board DTS,
the SoC pinmux definitions had to be corrected: the original
pwm_ao_c node was conflating two distinct pin groups (pwm_ao_c_d and
pwm_ao_c_e) into a single ambiguous entry.

Patch 1 fixes the pwm_ao_c pinmux entries in the T7 DTSI by splitting
them into two properly named nodes. Neither alternate is in use yet,
so there is no functional impact on existing boards.

Patch 2 enables the pwm_ao_cd controller on the VIM4 and adds a
pwm-leds node with a heartbeat trigger. The xtal-clk node is also
moved to restore alphabetical ordering among root node children.

Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
Ronald Claveau (2):
      arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions
      arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED

 .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 30 +++++++++++++++++-----
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi        | 12 +++++++--
 2 files changed, 33 insertions(+), 9 deletions(-)
---
base-commit: 31f32e8cdf59291e467250dfc57d1a8c718f63d2
change-id: 20260512-add-kvim4-sysled-8cc159524561

Best regards,
-- 
Ronald Claveau <linux-kernel-dev@aliel.fr>

[PATCH 1/2] arm64: dts: amlogic: t7: Fix pwm_ao_c pinmux definitions

[Ronald Claveau via B4 Relay]

From: Ronald Claveau <linux-kernel-dev@aliel.fr>

The pwm_ao_c pin node was incomplete: it was missing the group name
suffix, conflating two distinct pin groups (pwm_ao_c_d and pwm_ao_c_e)
into a single, ambiguous entry.

Split the node into two separate pinmux entries:
  - pwm_ao_c_d_pins: uses group "pwm_ao_c_d"
  - pwm_ao_c_e_pins: uses group "pwm_ao_c_e"

Both alternate pins are not yet referenced by any peripheral node,
so this has no functional impact on existing boards. No backport needed.

Fixes: ee6e05a49b93 ("arm64: dts: amlogic: t7: Add PWM pinctrl nodes")
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
 arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index 7fe72c94ed623..62f6b9baad28b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -400,9 +400,17 @@ mux {
 					};
 				};
 
-				pwm_ao_c_pins: pwm-ao-c {
+				pwm_ao_c_d_pins: pwm-ao-c-d {
 					mux {
-						groups = "pwm_ao_c";
+						groups = "pwm_ao_c_d";
+						function = "pwm_ao_c";
+						bias-disable;
+					};
+				};
+
+				pwm_ao_c_e_pins: pwm-ao-c-e {
+					mux {
+						groups = "pwm_ao_c_e";
 						function = "pwm_ao_c";
 						bias-disable;
 					};

-- 
2.49.0

[PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: add PWM-driven status LED

[Ronald Claveau via B4 Relay]

From: Ronald Claveau <linux-kernel-dev@aliel.fr>

The VIM4 board exposes a status LED wired to the PWM_AO_C_D output.
Enable the pwm_ao_cd controller with its pinmux, and declare a
pwm-leds node with a heartbeat trigger.

Also, move the xtal-clk node to restore alphabetical ordering.

Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
 .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 30 +++++++++++++++++-----
 1 file changed, 23 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
index 69d6118ba57e7..c41525a34b721 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -45,13 +45,6 @@ secmon_reserved_bl32: secmon@5300000 {
 		};
 	};
 
-	xtal: xtal-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "xtal";
-		#clock-cells = <0>;
-	};
-
 	dc_in: regulator-dc-in {
 		compatible = "regulator-fixed";
 		regulator-name = "DC_IN";
@@ -60,6 +53,16 @@ dc_in: regulator-dc-in {
 		regulator-always-on;
 	};
 
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		status {
+			linux,default-trigger="heartbeat";
+			max-brightness = <255>;
+			pwms = <&pwm_ao_cd 0 30040 0>;
+		};
+	};
+
 	sd_3v3: regulator-sdcard-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "SD_3V3";
@@ -155,6 +158,13 @@ wifi32k: wifi32k {
 		clock-frequency = <32768>;
 			pwms = <&pwm_ab 0 30518 0>;
 	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
 };
 
 &pwm_ab {
@@ -163,6 +173,12 @@ &pwm_ab {
 	pinctrl-names = "default";
 };
 
+&pwm_ao_cd {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_c_d_pins>;
+	pinctrl-names = "default";
+};
+
 /* SDIO */
 &sd_emmc_a {
 	status = "okay";

-- 
2.49.0