[PATCH v5 0/2] Enable audio support for J721S2 EVM

[Moteen Shah <m-shah@ti.com>]

Earlier version of the patchset sent upstream[0] was rejected as
its dependency[1], which resolves the DTBS check errors introduced
by [0] also got rejected on the grounds of ABI breakage.

Another solution to fix the DTBS check errors introduced by [0] is
to modify the ti,j721e-system-controller.yaml binding to allow
audio-refclk as clock-controller child. This is done in the first
patch of this series.

Changes sinve v4:
Link to v4: https://lore.kernel.org/all/20260519142341.2531948-1-m-shah@ti.com/
- Explicitly diasble main_mcan3 and Main_mcan5 as thy will silently break mcasp audio routing

Link to v3: https://lore.kernel.org/all/20260330094459.128648-1-m-shah@ti.com/
Link to v2: https://lore.kernel.org/all/20260205130707.2033197-1-m-shah@ti.com/
Link to v1: https://lore.kernel.org/all/20260112104536.83309-1-m-shah@ti.com/

Bootlogs: https://gist.github.com/Jamm02/f586087dad227450abe8637e8a688c68

Jayesh Choudhary (1):
  arm64: dts: ti: Add audio overlay for k3-j721s2-evm

Moteen Shah (1):
  dt-bindings: ti: Update audio-refclk binding and j721e system
    controller

 .../bindings/clock/ti,am62-audio-refclk.yaml  |   8 +-
 .../soc/ti/ti,j721e-system-controller.yaml    |   6 +-
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 .../boot/dts/ti/k3-j721s2-evm-audio.dtso      | 171 ++++++++++++++++++
 4 files changed, 185 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-audio.dtso

-- 
2.34.1