[PATCH v2 0/3] Add eDP lane mapping support

[PATCH v2 0/3] Add eDP lane mapping support

[Damon Ding]

This series adds configurable eDP/DP physical lane mapping support
via device tree data-lanes property.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

The series includes driver implementation and device tree binding
updates to support custom lane mapping configuration from endpoint
node, and keeps default linear lane order if no configuration is given.

Patch 1: Add endpoint data-lanes property to analogix-dp binding
Patch 2: Add data-lanes property example in rockchip analogix-dp binding
Patch 3: Implement lane mapping in analogix_dp driver

Damon Ding (3):
  dt-bindings: display: bridge: analogix-dp: Add data-lanes support for
    endpoint
  dt-bindings: rockchip: analogix-dp: Add data-lanes example
  drm/bridge: analogix_dp: Add support for optional data-lanes mapping

 .../bindings/display/bridge/analogix,dp.yaml  | 17 ++++--
 .../rockchip/rockchip,analogix-dp.yaml        |  1 +
 .../drm/bridge/analogix/analogix_dp_core.c    | 56 +++++++++++++++++++
 .../drm/bridge/analogix/analogix_dp_core.h    |  4 +-
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 +++--
 .../gpu/drm/bridge/analogix/analogix_dp_reg.h |  4 ++
 6 files changed, 83 insertions(+), 14 deletions(-)

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.

-- 
2.34.1

[PATCH v2 1/3] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint

[Damon Ding]

Add data-lanes property support to the port@1 endpoint for physical
lane mapping configuration.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.
---
 .../bindings/display/bridge/analogix,dp.yaml    | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index 62f0521b0924..e34fdb21adb4 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -42,13 +42,20 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Input node to receive pixel data.
+        description: Input node to receive pixel data.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Port node with one endpoint connected to a dp-connector node.
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Port node with one endpoint connected to sink device node.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
 
     required:
       - port@0
-- 
2.34.1

[PATCH v2 2/3] dt-bindings: rockchip: analogix-dp: Add data-lanes example

[Damon Ding]

Add data-lanes setting in endpoint example to show actual lane mapping
usage.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
 .../bindings/display/rockchip/rockchip,analogix-dp.yaml          | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
index bb75d898a5c5..cf75c926318b 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -151,6 +151,7 @@ examples:
           reg = <1>;
 
           edp_out_panel: endpoint {
+            data-lanes = <0 1>;
             remote-endpoint = <&panel_in_edp>;
           };
         };
-- 
2.34.1

[PATCH v2 3/3] drm/bridge: analogix_dp: Add support for optional data-lanes mapping

[Damon Ding]

Parse the optional 'data-lanes' device tree property to support
custom physical lane mapping configuration.

If no valid configuration is found, fall back to the default
lane map (0, 1, 2, 3) automatically and keep the driver running.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 56 +++++++++++++++++++
 .../drm/bridge/analogix/analogix_dp_core.h    |  4 +-
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 +++--
 .../gpu/drm/bridge/analogix/analogix_dp_reg.h |  4 ++
 4 files changed, 70 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5dc07ff84cd3..d1c6365118de 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1234,6 +1234,59 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.detect = analogix_dp_bridge_detect,
 };
 
+static int analogix_dp_dt_parse_lanes_map(struct analogix_dp_device *dp)
+{
+	struct video_info *video_info = &dp->video_info;
+	struct device_node *endpoint;
+	u32 tmp[LANE_COUNT4];
+	u32 map[LANE_COUNT4] = {0, 1, 2, 3};
+	bool used[LANE_COUNT4] = {false};
+	int num_lanes;
+	int ret, i;
+
+	memcpy(video_info->lane_map, map, sizeof(map));
+
+	num_lanes = drm_of_get_data_lanes_count_ep(dp->dev->of_node, 1, 0, 1,
+						   video_info->max_lane_count);
+	if (num_lanes < 0)
+		return -EINVAL;
+
+	endpoint = of_graph_get_endpoint_by_regs(dp->dev->of_node, 1, -1);
+	if (!endpoint)
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(endpoint, "data-lanes", tmp, num_lanes);
+	of_node_put(endpoint);
+	if (ret)
+		return -EINVAL;
+
+	for (i = 0; i < num_lanes; i++) {
+		if (tmp[i] >= LANE_COUNT4) {
+			dev_dbg(dp->dev, "data-lanes[%d] = %u is out of range\n", i, tmp[i]);
+			return -EINVAL;
+		}
+
+		if (used[tmp[i]]) {
+			dev_dbg(dp->dev, "data-lanes[%d] = %u is duplicate\n", i, tmp[i]);
+			return -EINVAL;
+		}
+
+		used[tmp[i]] = true;
+		map[i] = tmp[i];
+	}
+
+	for (i = 0; i < LANE_COUNT4 && num_lanes < LANE_COUNT4; i++) {
+		if (!used[i])
+			map[num_lanes++] = i;
+	}
+
+	dev_dbg(dp->dev, "Using parsed lane map: <%u %u %u %u>\n", map[0], map[1], map[2], map[3]);
+
+	memcpy(video_info->lane_map, map, sizeof(map));
+
+	return 0;
+}
+
 static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 {
 	struct device_node *dp_node = dp->dev->of_node;
@@ -1266,6 +1319,9 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 		break;
 	}
 
+	if (analogix_dp_dt_parse_lanes_map(dp))
+		dev_dbg(dp->dev, "No valid data-lanes found, using default lane map\n");
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 94348c4e3623..a75d0fb8f980 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -137,6 +137,8 @@ struct video_info {
 
 	int max_link_rate;
 	enum link_lane_count_type max_lane_count;
+
+	u32 lane_map[LANE_COUNT4];
 };
 
 struct link_train {
@@ -175,7 +177,7 @@ struct analogix_dp_device {
 /* analogix_dp_reg.c */
 void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable);
 void analogix_dp_stop_video(struct analogix_dp_device *dp);
-void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_lane_mapping(struct analogix_dp_device *dp);
 void analogix_dp_init_analog_param(struct analogix_dp_device *dp);
 void analogix_dp_init_interrupt(struct analogix_dp_device *dp);
 void analogix_dp_reset(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index ea8401293a23..c1344a3f013a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -48,16 +48,15 @@ void analogix_dp_stop_video(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
 }
 
-void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable)
+void analogix_dp_lane_mapping(struct analogix_dp_device *dp)
 {
+	u32 *lane_map = dp->video_info.lane_map;
 	u32 reg;
 
-	if (enable)
-		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
-		      LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
-	else
-		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
-		      LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+	reg = lane_map[0] << LANE0_MAP_SHIFT;
+	reg |= lane_map[1] << LANE1_MAP_SHIFT;
+	reg |= lane_map[2] << LANE2_MAP_SHIFT;
+	reg |= lane_map[3] << LANE3_MAP_SHIFT;
 
 	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_MAP);
 }
@@ -140,7 +139,7 @@ void analogix_dp_reset(struct analogix_dp_device *dp)
 
 	usleep_range(20, 30);
 
-	analogix_dp_lane_swap(dp, 0);
+	analogix_dp_lane_mapping(dp);
 
 	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
 	writel(0x40, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 12735139046c..ac914e37089b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -209,6 +209,10 @@
 #define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
 #define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
 #define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+#define LANE3_MAP_SHIFT				(6)
+#define LANE2_MAP_SHIFT				(4)
+#define LANE1_MAP_SHIFT				(2)
+#define LANE0_MAP_SHIFT				(0)
 
 /* ANALOGIX_DP_ANALOG_CTL_1 */
 #define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
-- 
2.34.1

Re: [PATCH v2 2/3] dt-bindings: rockchip: analogix-dp: Add data-lanes example

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1034 bytes --]

On Thu, May 21, 2026 at 07:44:58PM +0800, Damon Ding wrote:
> Add data-lanes setting in endpoint example to show actual lane mapping
> usage.
> 
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

Squash this with patch 1.
pw-bot: changes-requested

Thanks,
Conor.

> ---
>  .../bindings/display/rockchip/rockchip,analogix-dp.yaml          | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
> index bb75d898a5c5..cf75c926318b 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
> @@ -151,6 +151,7 @@ examples:
>            reg = <1>;
>  
>            edp_out_panel: endpoint {
> +            data-lanes = <0 1>;
>              remote-endpoint = <&panel_in_edp>;
>            };
>          };
> -- 
> 2.34.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 1/3] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2309 bytes --]

On Thu, May 21, 2026 at 07:44:57PM +0800, Damon Ding wrote:
> Add data-lanes property support to the port@1 endpoint for physical
> lane mapping configuration.
> 
> Lane mapping is mainly used for below scenarios:
> 1. Correct PCB lane swap and differential line routing crossover
>    without hardware changes;
> 2. Adapt mismatched lane pin definitions between SoC and eDP panel;
> 3. Support multiple panel hardware variants on the same board
>    by configuring data-lanes in device tree only.
> 
> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

Sashiko complaint here looks valid.
pw-bot: changes-requested

Thanks,
Conor.

> 
> ---
> 
> Changes in v2:
> - Add lane mapping application scenarios in commit message.
> - Remove redundant deprecated property 'data-lanes' for eDP node.
> - Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.
> ---
>  .../bindings/display/bridge/analogix,dp.yaml    | 17 ++++++++++++-----
>  1 file changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
> index 62f0521b0924..e34fdb21adb4 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
> @@ -42,13 +42,20 @@ properties:
>      properties:
>        port@0:
>          $ref: /schemas/graph.yaml#/properties/port
> -        description:
> -          Input node to receive pixel data.
> +        description: Input node to receive pixel data.
>  
>        port@1:
> -        $ref: /schemas/graph.yaml#/properties/port
> -        description:
> -          Port node with one endpoint connected to a dp-connector node.
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        description: Port node with one endpoint connected to sink device node.
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  enum: [ 0, 1, 2, 3 ]
>  
>      required:
>        - port@0
> -- 
> 2.34.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]