From: Pranjal Shrivastava <praan@google.com>
To: iommu@lists.linux.dev
Cc: Will Deacon <will@kernel.org>, Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Jason Gunthorpe <jgg@ziepe.ca>,
Mostafa Saleh <smostafa@google.com>,
Nicolin Chen <nicolinc@nvidia.com>,
Daniel Mentz <danielmentz@google.com>,
Ashish Mhetre <amhetre@nvidia.com>,
linux-arm-kernel@lists.infradead.org,
Pranjal Shrivastava <praan@google.com>
Subject: [PATCH v8 02/12] iommu/arm-smmu-v3: Add a helper to drain cmd queues
Date: Mon, 1 Jun 2026 21:58:59 +0000 [thread overview]
Message-ID: <20260601215909.3958732-3-praan@google.com> (raw)
In-Reply-To: <20260601215909.3958732-1-praan@google.com>
Before we suspend SMMU, we want to ensure that all commands (especially
ATC_INV) have been flushed by the CMDQ, i.e. the CMDQs are empty.
Add a helper function that polls till the queues are dained.
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 34 +++++++++++++++++++++
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 3 ++
2 files changed, 37 insertions(+)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 3dad2c2d3283..0e77ef1e4523 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -884,6 +884,40 @@ static int arm_smmu_cmdq_batch_submit(struct arm_smmu_device *smmu,
cmds->num, true);
}
+int arm_smmu_queue_poll_until_empty(struct arm_smmu_device *smmu,
+ struct arm_smmu_queue *q)
+{
+ struct arm_smmu_queue_poll qp;
+ struct arm_smmu_ll_queue *llq = &q->llq;
+ int ret = 0;
+
+ queue_poll_init(smmu, &qp);
+ do {
+ if (queue_empty(llq))
+ break;
+
+ ret = queue_poll(&qp);
+ WRITE_ONCE(llq->cons, readl_relaxed(q->cons_reg));
+
+ } while (!ret);
+
+ return ret;
+}
+
+static int arm_smmu_drain_queues(struct arm_smmu_device *smmu)
+{
+ int ret;
+
+ /*
+ * Since this is only called from the suspend callback where
+ * exclusive access is ensured as CMDQ_PROD_STOP_FLAG blocks new
+ * command submissions to the cmdq, we can skip the cmdq locking.
+ */
+ ret = arm_smmu_queue_poll_until_empty(smmu, &smmu->cmdq.q);
+
+ return ret;
+}
+
static void arm_smmu_page_response(struct device *dev, struct iopf_fault *unused,
struct iommu_page_response *resp)
{
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index 16353596e08a..c855ab4962ed 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -1165,6 +1165,9 @@ int arm_smmu_init_one_queue(struct arm_smmu_device *smmu,
int arm_smmu_cmdq_init(struct arm_smmu_device *smmu,
struct arm_smmu_cmdq *cmdq);
+int arm_smmu_queue_poll_until_empty(struct arm_smmu_device *smmu,
+ struct arm_smmu_queue *q);
+
static inline bool arm_smmu_master_canwbs(struct arm_smmu_master *master)
{
return dev_iommu_fwspec_get(master->dev)->flags &
--
2.54.0.1013.g208068f2d8-goog
next prev parent reply other threads:[~2026-06-01 21:59 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-01 21:58 [PATCH v8 00/10] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Pranjal Shrivastava
2026-06-01 21:58 ` [PATCH v8 01/12] iommu/arm-smmu-v3: Refactor arm_smmu_setup_irqs Pranjal Shrivastava
2026-06-01 21:58 ` Pranjal Shrivastava [this message]
2026-06-02 0:12 ` [PATCH v8 02/12] iommu/arm-smmu-v3: Add a helper to drain cmd queues Nicolin Chen
2026-06-02 3:28 ` Pranjal Shrivastava
2026-06-02 5:21 ` Daniel Mentz
2026-06-01 21:59 ` [PATCH v8 03/12] iommu/tegra241-cmdqv: Add a helper to drain VCMDQs Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 04/12] iommu/tegra241-cmdqv: Restore PROD and CONS after resume Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 05/12] iommu/arm-smmu-v3: Cache and restore MSI config Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 06/12] iommu/arm-smmu-v3: Handle gerror during suspend Pranjal Shrivastava
2026-06-02 0:15 ` Nicolin Chen
2026-06-02 3:31 ` Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 07/12] iommu/arm-smmu-v3: Add CMDQ_PROD_STOP_FLAG to gate CMDQ submissions Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 08/12] iommu/tegra241-cmdqv: Add a helper to quiesce VCMDQs Pranjal Shrivastava
2026-06-02 0:14 ` Nicolin Chen
2026-06-02 3:37 ` Pranjal Shrivastava
2026-06-02 5:59 ` Nicolin Chen
2026-06-02 6:21 ` Pranjal Shrivastava
2026-06-02 6:29 ` Nicolin Chen
2026-06-01 21:59 ` [PATCH v8 09/12] iommu/arm-smmu-v3: Implement pm_runtime & system sleep ops Pranjal Shrivastava
2026-06-02 5:25 ` Daniel Mentz
2026-06-02 12:12 ` Pranjal Shrivastava
2026-06-02 15:27 ` Daniel Mentz
2026-06-01 21:59 ` [PATCH v8 10/12] iommu/arm-smmu-v3: Enable pm_runtime and setup devlinks Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 11/12] iommu/arm-smmu-v3: Invoke pm_runtime before hw access Pranjal Shrivastava
2026-06-02 0:24 ` Nicolin Chen
2026-06-02 3:59 ` Pranjal Shrivastava
2026-06-02 5:51 ` Nicolin Chen
2026-06-02 6:24 ` Pranjal Shrivastava
2026-06-01 21:59 ` [PATCH v8 12/12] iommu/arm-smmu-v3: Add KUnit unit tests for Runtime PM Pranjal Shrivastava
2026-06-02 6:03 ` [PATCH v8 00/10] iommu/arm-smmu-v3: Implement Runtime/System Sleep ops Nicolin Chen
2026-06-02 12:04 ` Pranjal Shrivastava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260601215909.3958732-3-praan@google.com \
--to=praan@google.com \
--cc=amhetre@nvidia.com \
--cc=danielmentz@google.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nicolinc@nvidia.com \
--cc=robin.murphy@arm.com \
--cc=smostafa@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox