[PATCH v3 5/9] ARM: dts: aspeed: anacapa: add additional EEPROM node for SCM

[Colin Huang via B4 Relay <devnull+u8813345.gmail.com@kernel.org>]

From: Colin Huang <u8813345@gmail.com>

The SCM FRU EEPROM I2C address differs between SCM revisions:
- Rev B uses address 0x50
- Rev C/D/E/F and later use address 0x51

Add an additional AT24C128 EEPROM node at 0x51 on i2c9 so the same
device tree can support multiple SCM revisions.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
index 9314ee493c61..1d2f46e83be8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
@@ -593,11 +593,20 @@ &i2c9 {
 	status = "okay";
 
 	// SCM FRU
+	// | DC-SCM Rev        | Slave address of eeprom  |
+	// |-------------------|--------------------------|
+	// | Rev B             | 0x50                     |
+	// | Rev C/D/E/F/above | 0x51                     |
 	eeprom@50 {
 		compatible = "atmel,24c128";
 		reg = <0x50>;
 	};
 
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
 	// BSM FRU
 	eeprom@56 {
 		compatible = "atmel,24c64";

-- 
2.34.1