Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Midgy BALON <midgy971@gmail.com>
To: tomeu@tomeuvizoso.net, ogabbay@kernel.org, heiko@sntech.de,
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
	joro@8bytes.org, will@kernel.org
Cc: robin.murphy@arm.com, dri-devel@lists.freedesktop.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: [RFC PATCH v3 7/9] dt-bindings: npu: rockchip,rk3588-rknn-core: Add RK3568
Date: Thu,  4 Jun 2026 13:52:53 +0000	[thread overview]
Message-ID: <20260604135255.62682-8-midgy971@gmail.com> (raw)
In-Reply-To: <20260604135255.62682-1-midgy971@gmail.com>

The RK3568 carries a single core of the same NVDLA-derived NPU IP as the
RK3588.  Add its compatible.

On RK3568 the NPU NOC bus-idle and power gating are controlled through the
system PMU rather than a dedicated register block, so add a rockchip,pmu
phandle to that syscon.  The RK3568 NPU has no dedicated SRAM rail, so
sram-supply is required only on RK3588.

Signed-off-by: Midgy BALON <midgy971@gmail.com>
---
 .../npu/rockchip,rk3588-rknn-core.yaml         | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/npu/rockchip,rk3588-rknn-core.yaml b/Documentation/devicetree/bindings/npu/rockchip,rk3588-rknn-core.yaml
index caca2a4903cd1..af9936b32e9fe 100644
--- a/Documentation/devicetree/bindings/npu/rockchip,rk3588-rknn-core.yaml
+++ b/Documentation/devicetree/bindings/npu/rockchip,rk3588-rknn-core.yaml
@@ -21,6 +21,7 @@ properties:
 
   compatible:
     enum:
+      - rockchip,rk3568-rknn-core
       - rockchip,rk3588-rknn-core
 
   reg:
@@ -50,6 +51,13 @@ properties:
 
   npu-supply: true
 
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU syscon.  On RK3568 the NPU's NOC bus-idle and
+      power gating are controlled through the PMU; this points to that
+      syscon so those registers can be reached.
+
   power-domains:
     maxItems: 1
 
@@ -75,7 +83,15 @@ required:
   - resets
   - reset-names
   - npu-supply
-  - sram-supply
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3588-rknn-core
+then:
+  required:
+    - sram-supply
 
 additionalProperties: false
 
-- 
2.39.5



  parent reply	other threads:[~2026-06-04 13:53 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-04 13:52 [RFC PATCH v3 0/9] accel: rocket: Add RK3568 NPU support Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 1/9] accel: rocket: Introduce per-SoC rocket_soc_data Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 2/9] accel: rocket: Derive DMA width and core count from match data Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 3/9] accel: rocket: Add RK3568 SoC support Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 4/9] accel: rocket: Reset the NPU before detaching the IOMMU on timeout Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 5/9] accel: rocket: Keep the IOMMU domain attached across jobs Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 6/9] iommu/rockchip: Clear AUTO_GATING bit 1 on the RK356x v1 IOMMU Midgy BALON
2026-06-04 14:20   ` Tomeu Vizoso
2026-06-04 13:52 ` Midgy BALON [this message]
2026-06-04 13:52 ` [RFC PATCH v3 8/9] arm64: dts: rockchip: rk356x: Add the NPU and its IOMMU Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 9/9] arm64: dts: rockchip: rk3568-rock-3b: Enable the NPU Midgy BALON

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260604135255.62682-8-midgy971@gmail.com \
    --to=midgy971@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=ogabbay@kernel.org \
    --cc=robh@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=tomeu@tomeuvizoso.net \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox