From: Midgy BALON <midgy971@gmail.com>
To: tomeu@tomeuvizoso.net, ogabbay@kernel.org, heiko@sntech.de,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
joro@8bytes.org, will@kernel.org
Cc: robin.murphy@arm.com, dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, iommu@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH v3 8/9] arm64: dts: rockchip: rk356x: Add the NPU and its IOMMU
Date: Thu, 4 Jun 2026 13:52:54 +0000 [thread overview]
Message-ID: <20260604135255.62682-9-midgy971@gmail.com> (raw)
In-Reply-To: <20260604135255.62682-1-midgy971@gmail.com>
The RK3568 has an NVDLA-derived NPU at fde40000 with its own IOMMU at
fde4b000. Add both nodes (disabled by default) and the NPU power-domain
child under the PMU power-controller, and point rockchip,pmu at the PMU
syscon that controls the NPU NoC bus-idle.
The power-domain deliberately carries no pm_qos: qos_npu sits behind the
NPU NoC, which is gated until the NPU is brought up, so a genpd power-off
QoS save would fault reading it.
Signed-off-by: Midgy BALON <midgy971@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk356x-base.dtsi | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
index 64bdd8b7754b5..50ce5a5e4fc24 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x-base.dtsi
@@ -512,6 +512,13 @@ power-domain@RK3568_PD_GPU {
#power-domain-cells = <0>;
};
+ pd_npu: power-domain@RK3568_PD_NPU {
+ reg = <RK3568_PD_NPU>;
+ clocks = <&cru ACLK_NPU_PRE>,
+ <&cru HCLK_NPU_PRE>;
+ #power-domain-cells = <0>;
+ };
+
/* These power domains are grouped by VD_LOGIC */
power-domain@RK3568_PD_VI {
reg = <RK3568_PD_VI>;
@@ -948,6 +955,37 @@ qos_rga_wr: qos@fe158300 {
reg = <0x0 0xfe158300 0x0 0x20>;
};
+ rknn_core_0: npu@fde40000 {
+ compatible = "rockchip,rk3568-rknn-core";
+ reg = <0x0 0xfde40000 0x0 0x1000>,
+ <0x0 0xfde41000 0x0 0x1000>,
+ <0x0 0xfde43000 0x0 0x1000>;
+ reg-names = "pc", "cna", "core";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_NPU>, <&cru HCLK_NPU>,
+ <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_PRE>;
+ clock-names = "aclk", "hclk", "npu", "pclk";
+ assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+ assigned-clock-rates = <200000000>;
+ resets = <&cru SRST_A_NPU>, <&cru SRST_H_NPU>;
+ reset-names = "srst_a", "srst_h";
+ power-domains = <&power RK3568_PD_NPU>;
+ rockchip,pmu = <&pmu>;
+ iommus = <&rknn_mmu_0>;
+ status = "disabled";
+ };
+
+ rknn_mmu_0: iommu@fde4b000 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xfde4b000 0x0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "aclk", "iface";
+ clocks = <&cru ACLK_NPU>, <&cru HCLK_NPU>;
+ power-domains = <&power RK3568_PD_NPU>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
qos_npu: qos@fe180000 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe180000 0x0 0x20>;
--
2.39.5
next prev parent reply other threads:[~2026-06-04 13:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 13:52 [RFC PATCH v3 0/9] accel: rocket: Add RK3568 NPU support Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 1/9] accel: rocket: Introduce per-SoC rocket_soc_data Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 2/9] accel: rocket: Derive DMA width and core count from match data Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 3/9] accel: rocket: Add RK3568 SoC support Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 4/9] accel: rocket: Reset the NPU before detaching the IOMMU on timeout Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 5/9] accel: rocket: Keep the IOMMU domain attached across jobs Midgy BALON
2026-06-04 13:52 ` [RFC PATCH v3 6/9] iommu/rockchip: Clear AUTO_GATING bit 1 on the RK356x v1 IOMMU Midgy BALON
2026-06-04 14:20 ` Tomeu Vizoso
2026-06-04 13:52 ` [RFC PATCH v3 7/9] dt-bindings: npu: rockchip,rk3588-rknn-core: Add RK3568 Midgy BALON
2026-06-04 13:52 ` Midgy BALON [this message]
2026-06-04 13:52 ` [RFC PATCH v3 9/9] arm64: dts: rockchip: rk3568-rock-3b: Enable the NPU Midgy BALON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260604135255.62682-9-midgy971@gmail.com \
--to=midgy971@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=ogabbay@kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=tomeu@tomeuvizoso.net \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox