[PATCH v4 0/2] Add Shikra (QCM2390) display support

[PATCH v4 0/2] Add Shikra (QCM2390) display support

[Nabige Aala]

Shikra (QCM2390) is a Qualcomm SoC based on the QCM2290 family that
reuses the same MDSS/DPU 6.5 hardware as QCM2290. This series enables
the display subsystem for Shikra by adding DT binding updates for MDSS,
DSI controller and DPU and UBWC configuration mapping Shikra to
qcm2290_data.

Driver and SMMU support are covered by the existing qcom,qcm2290-mdss
fallback compatible string — no separate drm/msm or IOMMU patches are
required.

Tested on Shikra CQM EVK board with ILI7807S DSI panel. Display
pipeline probes cleanly and panel renders correctly.

Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
---
Nabige Aala (2):
  dt-bindings: display: msm: qcm2290: Add Shikra MDSS
  soc: qcom: ubwc: Add Shikra UBWC config 

 Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml		|  4 ++++
 Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml		|  6 +++++-
 Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml		| 19 ++++++++++++-------
 drivers/soc/qcom/ubwc_config.c							|  1 +
 4 files changed, 22 insertions(+), 8 deletions(-)
  ---
Prerequisite-Message-Id: <20260518-ili7807s-panel-v1-0-d7b048163b1c@oss.qualcomm.com>

---
Changes in v4:
- Fix sort order of qcom,shikra-dsi-ctrl entry in
  dsi-controller-main.yaml
- Replace oneOf in qcm2290-mdss patternProperties DPU compatible with
  contains: qcom,qcm2290-dpu, consistent with DSI child node pattern
- Drop arm64: defconfig: Enable ILI7807S DSI panel driver from this
  series; will be sent separately alongside device tree changes
- Link to v3: https://patch.msgid.link/20260605-shikra-display-v3-0-9846ba5fe635@oss.qualcomm.com

Changes in v3:
- Use a fallback compatible chain for qcom,shikra-dsi-ctrl
  in dsi-controller-main.yaml instead of a standalone enum entry, with
  qcom,qcm2290-dsi-ctrl and qcom,mdss-dsi-ctrl as fallbacks
- Replace oneOf in qcm2290-mdss patternProperties DSI compatible with
  contains: qcom,qcm2290-dsi-ctrl to avoid duplicating full chain
  validation already handled by dsi-controller-main.yaml
- Drop unnecessary select: block from qcom,qcm2290-mdss.yaml; default
  dt-validate compatible matching is sufficient
- Remove self from qcom,qcm2290-mdss.yaml maintainers list
- Link to v2: https://patch.msgid.link/20260604-shikra-display-v2-0-b3c1b2b67edc@oss.qualcomm.com

Changes in v2:
- Drop drm/msm/mdss: Shikra support patch; driver reuse is handled via
  the qcom,qcm2290-mdss fallback compatible string (per Dmitry's review)
- Drop iommu/arm-smmu: Shikra SMMU client table patch; not required with
  fallback compatible approach
- Fix UBWC config to map qcom,shikra to qcm2290_data instead of
  no_ubwc_data; Shikra shares UBWC support with QCM2290
- Refactor series from 5 patches to 3 patches
- Link to v1: https://patch.msgid.link/20260603-shikra-display-v1-0-aeac1b94faa7@oss.qualcomm.com

---
Nabige Aala (2):
      dt-bindings: display: msm: qcm2290: Add Shikra MDSS
      soc: qcom: ubwc: Add Shikra UBWC config

 .../bindings/display/msm/dsi-controller-main.yaml     |  4 ++++
 .../bindings/display/msm/qcom,qcm2290-dpu.yaml        |  6 +++++-
 .../bindings/display/msm/qcom,qcm2290-mdss.yaml       | 19 ++++++++++++-------
 drivers/soc/qcom/ubwc_config.c                        |  1 +
 4 files changed, 22 insertions(+), 8 deletions(-)
---
base-commit: 3a34f9c13cc0688f8db2a0db8506bf8c0d90737d
change-id: 20260603-shikra-display-07767208fa90

Best regards,
--  
Nabige Aala <nabige.aala@oss.qualcomm.com>

[PATCH v4 1/2] dt-bindings: display: msm: qcm2290: Add Shikra MDSS

[Nabige Aala]

Shikra reuses the same MDSS/DPU 6.5 hardware as QCM2290. Extend
the existing qcm2290 bindings to cover Shikra by adding fallback
compatible chains for MDSS, DPU and DSI controller nodes rather
than introducing a separate binding file.

Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
---
 .../bindings/display/msm/dsi-controller-main.yaml     |  4 ++++
 .../bindings/display/msm/qcom,qcm2290-dpu.yaml        |  6 +++++-
 .../bindings/display/msm/qcom,qcm2290-mdss.yaml       | 19 ++++++++++++-------
 3 files changed, 21 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index dbc0613e427e..fd0834d09ad6 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -47,6 +47,10 @@ properties:
               - qcom,sm8650-dsi-ctrl
               - qcom,sm8750-dsi-ctrl
           - const: qcom,mdss-dsi-ctrl
+      - items:
+          - const: qcom,shikra-dsi-ctrl
+          - const: qcom,qcm2290-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
       - items:
           - enum:
               - qcom,qcs8300-dsi-ctrl
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
index be6cd8adb3b6..034d3df8d247 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -13,7 +13,11 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,qcm2290-dpu
+    oneOf:
+      - const: qcom,qcm2290-dpu
+      - items:
+          - const: qcom,shikra-dpu
+          - const: qcom,qcm2290-dpu
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
index bb09ecd1a5b4..49a7b5c4c678 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QCM220 Display MDSS
+title: Qualcomm QCM2290 and Shikra Display MDSS
 
 maintainers:
   - Loic Poulain <loic.poulain@linaro.org>
@@ -12,13 +12,18 @@ maintainers:
 description:
   Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
   sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
-  are mentioned for QCM2290 target.
+  are mentioned for QCM2290 and Shikra targets. Shikra uses the same MDSS/DPU/DSI
+  hardware as QCM2290 (DPU 6.5) and shares the same register layout.
 
 $ref: /schemas/display/msm/mdss-common.yaml#
 
 properties:
   compatible:
-    const: qcom,qcm2290-mdss
+    oneOf:
+      - const: qcom,qcm2290-mdss
+      - items:
+          - const: qcom,shikra-mdss
+          - const: qcom,qcm2290-mdss
 
   clocks:
     items:
@@ -52,7 +57,8 @@ patternProperties:
 
     properties:
       compatible:
-        const: qcom,qcm2290-dpu
+        contains:
+          const: qcom,qcm2290-dpu
 
   "^dsi@[0-9a-f]+$":
     type: object
@@ -60,9 +66,8 @@ patternProperties:
 
     properties:
       compatible:
-        items:
-          - const: qcom,qcm2290-dsi-ctrl
-          - const: qcom,mdss-dsi-ctrl
+        contains:
+          const: qcom,qcm2290-dsi-ctrl
 
   "^phy@[0-9a-f]+$":
     type: object

-- 
2.34.1

Re: [PATCH v4 1/2] dt-bindings: display: msm: qcm2290: Add Shikra MDSS

[Dmitry Baryshkov]

On Mon, Jun 08, 2026 at 12:31:42PM +0530, Nabige Aala wrote:
> Shikra reuses the same MDSS/DPU 6.5 hardware as QCM2290. Extend
> the existing qcm2290 bindings to cover Shikra by adding fallback
> compatible chains for MDSS, DPU and DSI controller nodes rather
> than introducing a separate binding file.
> 
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
> ---
>  .../bindings/display/msm/dsi-controller-main.yaml     |  4 ++++
>  .../bindings/display/msm/qcom,qcm2290-dpu.yaml        |  6 +++++-
>  .../bindings/display/msm/qcom,qcm2290-mdss.yaml       | 19 ++++++++++++-------
>  3 files changed, 21 insertions(+), 8 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v4 1/2] dt-bindings: display: msm: qcm2290: Add Shikra MDSS

[Krzysztof Kozlowski]

On Mon, Jun 08, 2026 at 12:31:42PM +0530, Nabige Aala wrote:
> Shikra reuses the same MDSS/DPU 6.5 hardware as QCM2290. Extend
> the existing qcm2290 bindings to cover Shikra by adding fallback
> compatible chains for MDSS, DPU and DSI controller nodes rather
> than introducing a separate binding file.
> 
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

Re: [PATCH v4 1/2] dt-bindings: display: msm: qcm2290: Add Shikra MDSS

[Loic Poulain]

On Mon, Jun 8, 2026 at 9:02 AM Nabige Aala <nabige.aala@oss.qualcomm.com> wrote:
>
> Shikra reuses the same MDSS/DPU 6.5 hardware as QCM2290. Extend
> the existing qcm2290 bindings to cover Shikra by adding fallback
> compatible chains for MDSS, DPU and DSI controller nodes rather
> than introducing a separate binding file.
>
> Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>

Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>

[PATCH v4 2/2] soc: qcom: ubwc: Add Shikra UBWC config

[Nabige Aala]

Add UBWC configuration for the Shikra platform. Shikra shares the
same hardware as QCM2290 (Agatti), so reuse qcm2290_data for the
UBWC settings

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Nabige Aala <nabige.aala@oss.qualcomm.com>
---
 drivers/soc/qcom/ubwc_config.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/ubwc_config.c b/drivers/soc/qcom/ubwc_config.c
index 3fe47d8f0f63..1a2e54c6480d 100644
--- a/drivers/soc/qcom/ubwc_config.c
+++ b/drivers/soc/qcom/ubwc_config.c
@@ -278,6 +278,7 @@ static const struct of_device_id qcom_ubwc_configs[] __maybe_unused = {
 	{ .compatible = "qcom,sdm660", .data = &msm8937_data },
 	{ .compatible = "qcom,sdm670", .data = &sdm670_data, },
 	{ .compatible = "qcom,sdm845", .data = &sdm845_data, },
+	{ .compatible = "qcom,shikra", .data = &qcm2290_data, },
 	{ .compatible = "qcom,sm4250", .data = &sm6115_data, },
 	{ .compatible = "qcom,sm6115", .data = &sm6115_data, },
 	{ .compatible = "qcom,sm6125", .data = &sm6125_data, },

-- 
2.34.1