[PATCH] clk: at91: Read "reg" with helper

[PATCH] clk: at91: Read "reg" with helper

[Rob Herring (Arm)]

The "reg" property is an address-sized DT cell property. The AT91
compat clock parser only uses a small bus id from it, but reading it
with the u8 helper does not match the property encoding.

Use of_property_read_reg() so the code goes through the helper for
"reg" properties, then keep the existing range check before passing
the bus id to the clock registration code.

Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 drivers/clk/at91/dt-compat.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
index 5d543e807843..dad26dd5e71d 100644
--- a/drivers/clk/at91/dt-compat.c
+++ b/drivers/clk/at91/dt-compat.c
@@ -2,6 +2,7 @@
 #include <linux/clk-provider.h>
 #include <linux/clk/at91_pmc.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -217,7 +218,7 @@ CLK_OF_DECLARE(of_sama5d4_clk_h32mx_setup, "atmel,sama5d4-clk-h32mx",
 static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
 {
 	struct regmap *regmap_sfr;
-	u8 bus_id;
+	u64 bus_id;
 	const char *parent_names[2];
 	struct device_node *i2s_mux_np;
 	struct clk_hw *hw;
@@ -228,7 +229,7 @@ static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
 		return;
 
 	for_each_child_of_node(np, i2s_mux_np) {
-		if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
+		if (of_property_read_reg(i2s_mux_np, 0, &bus_id, NULL))
 			continue;
 
 		if (bus_id > I2S_BUS_NR)
-- 
2.53.0