[PATCH RESEND 0/3] dmaengine: xilinx_dma: Fixes and optimizations for AXIDMA and MCDMA channel management

[PATCH RESEND 0/3] dmaengine: xilinx_dma: Fixes and optimizations for AXIDMA and MCDMA channel management

[Suraj Gupta]

This patch series addresses issues and optimizations in the Xilinx
AXI DMA and MCDMA drivers:
1. Fix channel idle state management in the interrupt handlers.
2. Enable transfer chaining by removing unnecessary idle restrictions.
3. Optimize control register writes and channel start logic.


Changes in V2:
- Apply similar fixes and optimizations to MCDMA as well.
- Expand the 1/3 commit description with when the described issue occurs.

Suraj Gupta (3):
  dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and
    MCDMA interrupt handlers
  dmaengine: xilinx_dma: Enable transfer chaining for AXIDMA and MCDMA
    by removing idle restriction
  dmaengine: xilinx_dma: Optimize control register write and channel
    start logic for AXIDMA and MCDMA in corresponding start_transfer()

 drivers/dma/xilinx/xilinx_dma.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

-- 
2.25.1

[PATCH RESEND 1/3] dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers

[Suraj Gupta]

Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.

The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
   active_list still contains unprocessed descriptors.
5. This leads to premature transfer attempts and potential descriptor
   corruption or missed completions.

Only mark the channel as idle and start new transfers when the active list
is actually empty, ensuring proper channel state management and avoiding
spurious transfer attempts.

Fixes: c0bba3a99f07 ("dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine")
Tested-by: Folker Schwesinger <dev@folker-schwesinger.de>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Co-developed-by: Srinivas Neeli <srinivas.neeli@amd.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com>
---
 drivers/dma/xilinx/xilinx_dma.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 404235c17353..ca396b709742 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1893,8 +1893,10 @@ static irqreturn_t xilinx_mcdma_irq_handler(int irq, void *data)
 	if (status & XILINX_MCDMA_IRQ_IOC_MASK) {
 		spin_lock(&chan->lock);
 		xilinx_dma_complete_descriptor(chan);
-		chan->idle = true;
-		chan->start_transfer(chan);
+		if (list_empty(&chan->active_list)) {
+			chan->idle = true;
+			chan->start_transfer(chan);
+		}
 		spin_unlock(&chan->lock);
 	}
 
@@ -1950,8 +1952,10 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
 		      XILINX_DMA_DMASR_DLY_CNT_IRQ)) {
 		spin_lock(&chan->lock);
 		xilinx_dma_complete_descriptor(chan);
-		chan->idle = true;
-		chan->start_transfer(chan);
+		if (list_empty(&chan->active_list)) {
+			chan->idle = true;
+			chan->start_transfer(chan);
+		}
 		spin_unlock(&chan->lock);
 	}
 
-- 
2.25.1

[PATCH RESEND 2/3] dmaengine: xilinx_dma: Enable transfer chaining for AXIDMA and MCDMA by removing idle restriction

[Suraj Gupta]

Remove the restrictive idle check in xilinx_dma_start_transfer() and
xilinx_mcdma_start_transfer() that prevented new transfers from being
queued when the channel was busy.
Additionally, only update the CURDESC register when the channel is
running in scatter-gather mode and active list is empty to avoid
interfering with transfers already in progress. When the active list
contains transfers, the hardware tail pointer extension mechanism
handles chaining automatically.

Tested-by: Folker Schwesinger <dev@folker-schwesinger.de>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Co-developed-by: Srinivas Neeli <srinivas.neeli@amd.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com>
---
 drivers/dma/xilinx/xilinx_dma.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index ca396b709742..35b553ee3205 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1580,9 +1580,6 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 		return;
 	}
 
-	if (!chan->idle)
-		return;
-
 	head_desc = list_first_entry(&chan->pending_list,
 				     struct xilinx_dma_tx_descriptor, node);
 	tail_desc = list_last_entry(&chan->pending_list,
@@ -1599,7 +1596,7 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
 	}
 
-	if (chan->has_sg)
+	if (chan->has_sg && list_empty(&chan->active_list))
 		xilinx_write(chan, XILINX_DMA_REG_CURDESC,
 			     head_desc->async_tx.phys);
 	reg  &= ~XILINX_DMA_CR_DELAY_MAX;
@@ -1660,9 +1657,6 @@ static void xilinx_mcdma_start_transfer(struct xilinx_dma_chan *chan)
 	if (chan->err)
 		return;
 
-	if (!chan->idle)
-		return;
-
 	if (list_empty(&chan->pending_list))
 		return;
 
@@ -1685,8 +1679,9 @@ static void xilinx_mcdma_start_transfer(struct xilinx_dma_chan *chan)
 	dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
 
 	/* Program current descriptor */
-	xilinx_write(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET(chan->tdest),
-		     head_desc->async_tx.phys);
+	if (chan->has_sg && list_empty(&chan->active_list))
+		xilinx_write(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET(chan->tdest),
+			     head_desc->async_tx.phys);
 
 	/* Program channel enable register */
 	reg = dma_ctrl_read(chan, XILINX_MCDMA_CHEN_OFFSET);
-- 
2.25.1

[PATCH RESEND 3/3] dmaengine: xilinx_dma: Optimize control register write and channel start logic for AXIDMA and MCDMA in corresponding start_transfer()

[Suraj Gupta]

Optimize AXI DMA control register programming by consolidating
coalesce count and delay configuration into a single register write.
Previously, the coalesce count was written separately from the delay
configuration, resulting in two register writes. Combine these into
one write operation to reduce bus overhead.
Additionally, avoid redundant channel starts in xilinx_dma_start_transfer()
and xilinx_mcdma_start_transfer() by only calling xilinx_dma_start() when
the channel is actually idle.

Tested-by: Folker Schwesinger <dev@folker-schwesinger.de>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Co-developed-by: Srinivas Neeli <srinivas.neeli@amd.com>
Signed-off-by: Srinivas Neeli <srinivas.neeli@amd.com>
---
 drivers/dma/xilinx/xilinx_dma.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 35b553ee3205..aa3dee0dc2fc 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1593,7 +1593,6 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 		reg &= ~XILINX_DMA_CR_COALESCE_MAX;
 		reg |= chan->desc_pendingcount <<
 				  XILINX_DMA_CR_COALESCE_SHIFT;
-		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
 	}
 
 	if (chan->has_sg && list_empty(&chan->active_list))
@@ -1604,7 +1603,8 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 	reg |= XILINX_DMA_DMAXR_ALL_IRQ_MASK;
 	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
 
-	xilinx_dma_start(chan);
+	if (chan->idle)
+		xilinx_dma_start(chan);
 
 	if (chan->err)
 		return;
@@ -1693,7 +1693,8 @@ static void xilinx_mcdma_start_transfer(struct xilinx_dma_chan *chan)
 	reg |= XILINX_MCDMA_CR_RUNSTOP_MASK;
 	dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
 
-	xilinx_dma_start(chan);
+	if (chan->idle)
+		xilinx_dma_start(chan);
 
 	if (chan->err)
 		return;
-- 
2.25.1