[PATCH v2 00/12] Add thermal management support for sama7d65

[PATCH v2 00/12] Add thermal management support for sama7d65

[Varshini Rajendran]

Apologies for the significant delay in following up this series.
Thank you for your patience and the earlier reviews.
This v2 reworks the series based on the feedback received on v1.

The thermal management system of sama7d65 includes:

- Temperature sensor as a part of ADC channel
- Temperature calibration data retrieved from the OTP memory for
  improved accuracy of the readings
- DVFS implementation
- Thermal system with DVFS as cooling cell.

This patch series adds support for the following:

- Tag-based packet lookup for the NVMEM OTPC driver while preserving
  backward compatibility with existing ID-based access
- Temperature calibration layout handling in the ADC driver to support
  different SoC-specific calibration data formats
- ADC driver adaptation for sama7d65
- DT nodes for OTP, ADC, temperature sensor, and thermal zones for
  sama7d65

Changes in v2:
    - Preserved backward compatibility with ID-based packet lookup to
      avoid breaking existing users
    - Removed sama7g5 DTS changes (not needed with backward compatible
      driver - will be sent later to update to the new access method)
    - Preserved the packet data structure returned not to break the
      consumers
    - Reworked ADC driver to use a calibration layout structure instead of
      hardcoded indexes, for scalability
    - Fixed kernel-doc Return section
    - Removed stray blank line in mchp_otpc_read()
    - Removed unnecessary UL suffix in writel_relaxed()
    - Dropped unused packet types
    - Fixed stray spaces before exclamation marks in error messages
    - Added ASCII representation to TAG macro definition
    - Removed odd MAX enum with trailing comma and refactored
    - Moved DTS patches to the end of series
    - Used cleanup.h helpers for NVMEM data buffer handling in ADC driver
    - Combined multiple v1 patches into logical units
    - Used correct subject prefixes for dt-bindings patches
    - Used fixed-layout NVMEM syntax for sama7d65 DTS and binding
      instead of deprecated syntax
    - Added cpu-supply linkage for proper DVFS voltage scaling
    - Updated stale stride=4 comment in dt-bindings header

Link to v1: https://lore.kernel.org/linux-arm-kernel/20250804100219.63325-1-varshini.rajendran@microchip.com/


Varshini Rajendran (12):
  dt-bindings: iio: adc: at91-sama5d2: document sama7d65
  iio: adc: at91-sama5d2_adc: rework temp calibration layout handling
  iio: adc: at91-sama5d2_adc: adapt the driver for sama7d65
  dt-bindings: nvmem: microchip,sama7g5-otpc: add sama7d65 and dt node
    example
  nvmem: microchip-otpc: add tag-based packet lookup
  ARM: dts: microchip: sama7d65: add cpu opps
  ARM: dts: microchip: sama7d65: Add ADC node
  ARM: dts: microchip: sama7d65_curiosity: Enable ADC, DVFS
  ARM: dts: microchip: sama7d65: add otpc node
  ARM: dts: microchip: sama7d65: add cells for temperature calibration
  ARM: dts: microchip: sama7d65: add temperature sensor
  ARM: dts: microchip: sama7d65: add thermal zones node

 .../bindings/iio/adc/atmel,sama5d2-adc.yaml   |   1 +
 .../nvmem/microchip,sama7g5-otpc.yaml         |  28 +++-
 .../dts/microchip/at91-sama7d65_curiosity.dts |  27 ++++
 arch/arm/boot/dts/microchip/sama7d65.dtsi     | 132 ++++++++++++++++
 drivers/iio/adc/at91-sama5d2_adc.c            | 116 ++++++++++----
 drivers/nvmem/microchip-otpc.c                | 142 ++++++++++++++++--
 .../nvmem/microchip,sama7g5-otpc.h            |   4 +-
 7 files changed, 409 insertions(+), 41 deletions(-)

-- 
2.34.1

[PATCH v2 01/12] dt-bindings: iio: adc: at91-sama5d2: document sama7d65

[Varshini Rajendran]

Add dt-binding documentation for sama7d65 ADC.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
index 4817b840977a..e8a65fdcd018 100644
--- a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -15,6 +15,7 @@ properties:
       - atmel,sama5d2-adc
       - microchip,sam9x60-adc
       - microchip,sama7g5-adc
+      - microchip,sama7d65-adc
 
   reg:
     maxItems: 1
-- 
2.34.1

Re: [PATCH v2 01/12] dt-bindings: iio: adc: at91-sama5d2: document sama7d65

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1071 bytes --]

On Tue, Jun 23, 2026 at 04:29:33PM +0530, Varshini Rajendran wrote:
> Add dt-binding documentation for sama7d65 ADC.

Commit message is missing an explanation of why a fallback is not
suitable.
pw-bot: changes-requested

Thanks,
Conor

> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
> index 4817b840977a..e8a65fdcd018 100644
> --- a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
> @@ -15,6 +15,7 @@ properties:
>        - atmel,sama5d2-adc
>        - microchip,sam9x60-adc
>        - microchip,sama7g5-adc
> +      - microchip,sama7d65-adc
>  
>    reg:
>      maxItems: 1
> -- 
> 2.34.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v2 02/12] iio: adc: at91-sama5d2_adc: rework temp calibration layout handling

[Varshini Rajendran]

Extend support to handle different temperature calibration layouts.

Add a temperature calibration data layout structure to describe indexes
of the factors P1, P4, P6, tag, minimum length of the packet and the
scaling factors for P1 (mul, div) which are SoC-specific instead of the
older non scalable id structure. This helps handle the differences in the
same function flow and prepare the calibration data to be applied. Add
additional condition to validate the calibration data read from the
NVMEM cell using the TAG of the packet.

Use cleanup helpers for NVMEM data buffer wherever applicable.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 85 ++++++++++++++++++++----------
 1 file changed, 58 insertions(+), 27 deletions(-)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 255970b2e747..b569d175f4c3 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -445,6 +445,28 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
 #define at91_adc_writel(st, reg, val)					\
 	writel_relaxed(val, (st)->base + (st)->soc_info.platform->layout->reg)
 
+#define AT91_TEMP_CALIB_TAG_ACST	0x41435354
+
+/**
+ * struct at91_adc_temp_calib_layout - temperature calibration packet layout
+ * @tag_idx:	index of Packet tag in the NVMEM cell buffer
+ * @p1_idx:	index of FT1_TEMP, equivalent to P1 in the NVMEM cell buffer
+ * @p4_idx:	index of FT1_VPAT, equivalent to P4 in the NVMEM cell buffer
+ * @p6_idx:	index of FT2_VBG, equivalent to P6 in the NVMEM cell buffer
+ * @min_len:	minimum number of u32 words expected in the NVMEM cell buffer
+ * @p1_mul:	multiplier applied to P1 to convert to millicelcius
+ * @p1_div:	divider applied to P1 to convert to millicelcius
+ */
+struct at91_adc_temp_calib_layout {
+	unsigned int tag_idx;
+	unsigned int p1_idx;
+	unsigned int p4_idx;
+	unsigned int p6_idx;
+	unsigned int min_len;
+	unsigned int p1_mul;
+	unsigned int p1_div;
+};
+
 /**
  * struct at91_adc_platform - at91-sama5d2 platform information struct
  * @layout:		pointer to the reg layout struct
@@ -464,6 +486,7 @@ static const struct at91_adc_reg_layout sama7g5_layout = {
  * @chan_realbits:	realbits for registered channels
  * @temp_chan:		temperature channel index
  * @temp_sensor:	temperature sensor supported
+ * @temp_calib_layout:  temperature calibration packet layout
  */
 struct at91_adc_platform {
 	const struct at91_adc_reg_layout	*layout;
@@ -481,6 +504,7 @@ struct at91_adc_platform {
 	unsigned int				chan_realbits;
 	unsigned int				temp_chan;
 	bool					temp_sensor;
+	const struct at91_adc_temp_calib_layout	*temp_calib_layout;
 };
 
 /**
@@ -496,18 +520,14 @@ struct at91_adc_temp_sensor_clb {
 	u32 p6;
 };
 
-/**
- * enum at91_adc_ts_clb_idx - calibration indexes in NVMEM buffer
- * @AT91_ADC_TS_CLB_IDX_P1: index for P1
- * @AT91_ADC_TS_CLB_IDX_P4: index for P4
- * @AT91_ADC_TS_CLB_IDX_P6: index for P6
- * @AT91_ADC_TS_CLB_IDX_MAX: max index for temperature calibration packet in OTP
- */
-enum at91_adc_ts_clb_idx {
-	AT91_ADC_TS_CLB_IDX_P1 = 2,
-	AT91_ADC_TS_CLB_IDX_P4 = 5,
-	AT91_ADC_TS_CLB_IDX_P6 = 7,
-	AT91_ADC_TS_CLB_IDX_MAX = 19,
+static const struct at91_adc_temp_calib_layout sama7g5_temp_calib = {
+	.tag_idx = 1,
+	.p1_idx = 2,
+	.p4_idx = 5,
+	.p6_idx = 7,
+	.min_len = 19,
+	.p1_mul = 1000,
+	.p1_div = 1,
 };
 
 /* Temperature sensor calibration - Vtemp voltage sensitivity to temperature. */
@@ -745,6 +765,7 @@ static const struct at91_adc_platform sama7g5_platform = {
 	.chan_realbits = 16,
 	.temp_sensor = true,
 	.temp_chan = AT91_SAMA7G5_ADC_TEMP_CHANNEL,
+	.temp_calib_layout = &sama7g5_temp_calib,
 };
 
 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
@@ -2251,13 +2272,19 @@ static int at91_adc_temp_sensor_init(struct at91_adc_state *st,
 {
 	struct at91_adc_temp_sensor_clb *clb = &st->soc_info.temp_sensor_clb;
 	struct nvmem_cell *temp_calib;
-	u32 *buf;
+	const struct at91_adc_temp_calib_layout *layout;
+	void *cell_data;
+	u32 *buf __free(kfree) = NULL;
 	size_t len;
 	int ret = 0;
 
 	if (!st->soc_info.platform->temp_sensor)
 		return 0;
 
+	layout = st->soc_info.platform->temp_calib_layout;
+	if (!layout || !layout->p1_div)
+		return -EINVAL;
+
 	/* Get the calibration data from NVMEM. */
 	temp_calib = nvmem_cell_get(dev, "temperature_calib");
 	if (IS_ERR(temp_calib)) {
@@ -2267,31 +2294,35 @@ static int at91_adc_temp_sensor_init(struct at91_adc_state *st,
 		return ret;
 	}
 
-	buf = nvmem_cell_read(temp_calib, &len);
+	cell_data = nvmem_cell_read(temp_calib, &len);
 	nvmem_cell_put(temp_calib);
-	if (IS_ERR(buf)) {
+	if (IS_ERR(cell_data)) {
 		dev_err(dev, "Failed to read calibration data!\n");
-		return PTR_ERR(buf);
+		return PTR_ERR(cell_data);
 	}
-	if (len < AT91_ADC_TS_CLB_IDX_MAX * 4) {
+
+	buf = cell_data;
+
+	if (len < layout->min_len * sizeof(*buf) ||
+	    buf[layout->tag_idx] != AT91_TEMP_CALIB_TAG_ACST) {
 		dev_err(dev, "Invalid calibration data!\n");
-		ret = -EINVAL;
-		goto free_buf;
+		return -EINVAL;
 	}
 
 	/* Store calibration data for later use. */
-	clb->p1 = buf[AT91_ADC_TS_CLB_IDX_P1];
-	clb->p4 = buf[AT91_ADC_TS_CLB_IDX_P4];
-	clb->p6 = buf[AT91_ADC_TS_CLB_IDX_P6];
+	clb->p1 = buf[layout->p1_idx];
+	clb->p4 = buf[layout->p4_idx];
+	clb->p6 = buf[layout->p6_idx];
 
 	/*
-	 * We prepare here the conversion to milli to avoid doing it on hotpath.
+	 * Here we prepare the conversion to milli to avoid doing it on hotpath.
+	 * The p1 value is multiplied and divided with a scaling factor as per
+	 * the SoC storage format described by per-platform calibration layout.
 	 */
-	clb->p1 = clb->p1 * 1000;
+	clb->p1 *= layout->p1_mul;
+	clb->p1 /= layout->p1_div;
 
-free_buf:
-	kfree(buf);
-	return ret;
+	return 0;
 }
 
 static int at91_adc_probe(struct platform_device *pdev)
-- 
2.34.1

Re: [PATCH v2 02/12] iio: adc: at91-sama5d2_adc: rework temp calibration layout handling

[Andy Shevchenko]

On Tue, Jun 23, 2026 at 04:29:34PM +0530, Varshini Rajendran wrote:
> Extend support to handle different temperature calibration layouts.
> 
> Add a temperature calibration data layout structure to describe indexes
> of the factors P1, P4, P6, tag, minimum length of the packet and the
> scaling factors for P1 (mul, div) which are SoC-specific instead of the
> older non scalable id structure. This helps handle the differences in the
> same function flow and prepare the calibration data to be applied. Add
> additional condition to validate the calibration data read from the
> NVMEM cell using the TAG of the packet.
> 
> Use cleanup helpers for NVMEM data buffer wherever applicable.

> +#define AT91_TEMP_CALIB_TAG_ACST	0x41435354

This seems like FourCC that can be represented in ASCII (I suppose "ACST").
Can you add a short comment on top to decode that?
/* ...blablabla... in ASCII "ACST" */

...

>  struct at91_adc_platform {
>  	const struct at91_adc_reg_layout	*layout;
> @@ -481,6 +504,7 @@ struct at91_adc_platform {
>  	unsigned int				chan_realbits;
>  	unsigned int				temp_chan;
>  	bool					temp_sensor;
> +	const struct at91_adc_temp_calib_layout	*temp_calib_layout;
>  };

Is this the best placement in accordance with `pahole` tool?

...

> -	u32 *buf;
> +	u32 *buf __free(kfree) = NULL;

This looks like a separate change. Why is it in this patch?

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 03/12] iio: adc: at91-sama5d2_adc: adapt the driver for sama7d65

[Varshini Rajendran]

Add support for sama7d65 ADC. The differences are highlighted with the
compatible. The calibration data layout is the main difference.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 31 ++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index b569d175f4c3..237d339f342a 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -530,6 +530,16 @@ static const struct at91_adc_temp_calib_layout sama7g5_temp_calib = {
 	.p1_div = 1,
 };
 
+static const struct at91_adc_temp_calib_layout sama7d65_temp_calib = {
+	.tag_idx = 1,
+	.p1_idx = 3,
+	.p4_idx = 2,
+	.p6_idx = 5,
+	.min_len = 11,
+	.p1_mul = 1,
+	.p1_div = 1000,
+};
+
 /* Temperature sensor calibration - Vtemp voltage sensitivity to temperature. */
 #define AT91_ADC_TS_VTEMP_DT		(2080U)
 
@@ -768,6 +778,24 @@ static const struct at91_adc_platform sama7g5_platform = {
 	.temp_calib_layout = &sama7g5_temp_calib,
 };
 
+static const struct at91_adc_platform sama7d65_platform = {
+	.layout = &sama7g5_layout,
+	.adc_channels = &at91_sama7g5_adc_channels,
+	.nr_channels = AT91_SAMA7G5_SINGLE_CHAN_CNT +
+		       AT91_SAMA7G5_DIFF_CHAN_CNT +
+		       AT91_SAMA7G5_TEMP_CHAN_CNT,
+	.max_channels = ARRAY_SIZE(at91_sama7g5_adc_channels),
+	.max_index = AT91_SAMA7G5_MAX_CHAN_IDX,
+	.hw_trig_cnt = AT91_SAMA7G5_HW_TRIG_CNT,
+	.osr_mask = GENMASK(18, 16),
+	.oversampling_avail = { 1, 4, 16, 64, 256, },
+	.oversampling_avail_no = 5,
+	.chan_realbits = 16,
+	.temp_sensor = true,
+	.temp_chan = AT91_SAMA7G5_ADC_TEMP_CHANNEL,
+	.temp_calib_layout = &sama7d65_temp_calib,
+};
+
 static int at91_adc_chan_xlate(struct iio_dev *indio_dev, int chan)
 {
 	int i;
@@ -2638,6 +2666,9 @@ static const struct of_device_id at91_adc_dt_match[] = {
 	}, {
 		.compatible = "microchip,sama7g5-adc",
 		.data = (const void *)&sama7g5_platform,
+	}, {
+		.compatible = "microchip,sama7d65-adc",
+		.data = (const void *)&sama7d65_platform,
 	}, {
 		/* sentinel */
 	}
-- 
2.34.1

Re: [PATCH v2 03/12] iio: adc: at91-sama5d2_adc: adapt the driver for sama7d65

[Andy Shevchenko]

On Tue, Jun 23, 2026 at 04:29:35PM +0530, Varshini Rajendran wrote:
> Add support for sama7d65 ADC. The differences are highlighted with the
> compatible. The calibration data layout is the main difference.

Do you need to update a Kconfig help text?

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 04/12] dt-bindings: nvmem: microchip,sama7g5-otpc: add sama7d65 and dt node example

[Varshini Rajendran]

Add support for sama7d65 and a dt node example that shows tag can be used
to reference a packet stored in the OTP memory.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 .../nvmem/microchip,sama7g5-otpc.yaml         | 28 +++++++++++++++++--
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
index cc25f2927682..3cc16b0044a6 100644
--- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
+++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -20,9 +20,15 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - const: microchip,sama7g5-otpc
-      - const: syscon
+    oneOf:
+      - items:
+          - const: microchip,sama7g5-otpc
+          - const: syscon
+      - items:
+          - enum:
+              - microchip,sama7d65-otpc
+          - const: microchip,sama7g5-otpc
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -48,4 +54,20 @@ examples:
         };
     };
 
+  - |
+    otp_controller: efuse@e8c00000 {
+        compatible = "microchip,sama7d65-otpc", "microchip,sama7g5-otpc", "syscon";
+        reg = <0xe8c00000 0x100>;
+
+        nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            temp_calib: calib@41435354 {
+                reg = <0x41435354 0x2c>;    /* Temp calib data packet TAG */
+            };
+        };
+    };
+
 ...
-- 
2.34.1

Re: [PATCH v2 04/12] dt-bindings: nvmem: microchip,sama7g5-otpc: add sama7d65 and dt node example

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1995 bytes --]

On Tue, Jun 23, 2026 at 04:29:36PM +0530, Varshini Rajendran wrote:
> Add support for sama7d65 and a dt node example that shows tag can be used
> to reference a packet stored in the OTP memory.
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  .../nvmem/microchip,sama7g5-otpc.yaml         | 28 +++++++++++++++++--
>  1 file changed, 25 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
> index cc25f2927682..3cc16b0044a6 100644
> --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
> @@ -20,9 +20,15 @@ allOf:
>  
>  properties:
>    compatible:
> -    items:
> -      - const: microchip,sama7g5-otpc
> -      - const: syscon
> +    oneOf:
> +      - items:
> +          - const: microchip,sama7g5-otpc
> +          - const: syscon
> +      - items:
> +          - enum:
> +              - microchip,sama7d65-otpc
> +          - const: microchip,sama7g5-otpc
> +          - const: syscon
>  
>    reg:
>      maxItems: 1
> @@ -48,4 +54,20 @@ examples:
>          };
>      };
>  
> +  - |
> +    otp_controller: efuse@e8c00000 {

Drop the unused label since you have to respin the series.
With it gone
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

Cheers,
Conor.

> +        compatible = "microchip,sama7d65-otpc", "microchip,sama7g5-otpc", "syscon";
> +        reg = <0xe8c00000 0x100>;
> +
> +        nvmem-layout {
> +            compatible = "fixed-layout";
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +
> +            temp_calib: calib@41435354 {
> +                reg = <0x41435354 0x2c>;    /* Temp calib data packet TAG */
> +            };
> +        };
> +    };
> +
>  ...
> -- 
> 2.34.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v2 05/12] nvmem: microchip-otpc: add tag-based packet lookup

[Varshini Rajendran]

Add support for accessing OTP packets by their 4-byte ASCII tag while
preserving backward compatibility with the existing ID-based lookup.

The OTP memory layout can vary across devices and may change over time,
making the packet ID approach unreliable when the memory map is not
known in advance. The packet tag provides a reliable way to identify
and access packets without prior knowledge of the OTP memory layout.

Two offset encoding are now supported:
  1. Legacy ID-based: offset = OTP_PKT(id) = id * 4
     Used in DT as: reg = <OTP_PKT(1) 76>;
  2. TAG-based: offset = 4-byte ASCII packet tag
     Used in DT as: reg = <0x41435354 0x4c>; (tag "ACST")

The driver resolves offsets matching valid legacy selectors (multiples
of 4 within the packet count) through ID lookup, falling back to tag
lookup for other values. This ensures existing device trees continue
to work while enabling new tag-based access.

During probe, packet meta data including the tag is read and cached.
The driver also validates OTP memory accessibility and emulation mode
status. When the boot packet is not configured, emulation mode allows
access to the other packets. When both are not available an
informational message is logged.

The stride of the nvmem memory is set to 1 in order to support tag based
offsets, comment in the header file is updated accordingly.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 drivers/nvmem/microchip-otpc.c                | 142 ++++++++++++++++--
 .../nvmem/microchip,sama7g5-otpc.h            |   4 +-
 2 files changed, 135 insertions(+), 11 deletions(-)

diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
index df979e8549fd..cbb4822a97c0 100644
--- a/drivers/nvmem/microchip-otpc.c
+++ b/drivers/nvmem/microchip-otpc.c
@@ -18,16 +18,20 @@
 #define MCHP_OTPC_CR_READ		BIT(6)
 #define MCHP_OTPC_MR			(0x4)
 #define MCHP_OTPC_MR_ADDR		GENMASK(31, 16)
+#define MCHP_OTPC_MR_EMUL		BIT(7)
 #define MCHP_OTPC_AR			(0x8)
 #define MCHP_OTPC_SR			(0xc)
 #define MCHP_OTPC_SR_READ		BIT(6)
 #define MCHP_OTPC_HR			(0x20)
 #define MCHP_OTPC_HR_SIZE		GENMASK(15, 8)
+#define MCHP_OTPC_HR_PACKET_TYPE	GENMASK(2, 0)
 #define MCHP_OTPC_DR			(0x24)
 
 #define MCHP_OTPC_NAME			"mchp-otpc"
 #define MCHP_OTPC_SIZE			(11 * 1024)
 
+#define PACKET_TYPE_REGULAR		1
+
 /**
  * struct mchp_otpc - OTPC private data structure
  * @base: base address
@@ -47,11 +51,15 @@ struct mchp_otpc {
  * @list: list head
  * @id: packet ID
  * @offset: packet offset (in words) in OTP memory
+ * @type: type of the packet
+ * @tag: 4-byte ASCII tag of the packet
  */
 struct mchp_otpc_packet {
 	struct list_head list;
 	u32 id;
 	u32 offset;
+	u32 type;
+	u32 tag;
 };
 
 static struct mchp_otpc_packet *mchp_otpc_id_to_packet(struct mchp_otpc *otpc,
@@ -70,6 +78,55 @@ static struct mchp_otpc_packet *mchp_otpc_id_to_packet(struct mchp_otpc *otpc,
 	return NULL;
 }
 
+/**
+ * mchp_otpc_tag_to_packet() - find packet by tag
+ * @otpc: OTPC private data
+ * @tag: 4-byte ASCII tag to search for
+ *
+ * Return: pointer to packet if found, NULL otherwise
+ */
+static struct mchp_otpc_packet *mchp_otpc_tag_to_packet(struct mchp_otpc *otpc,
+							u32 tag)
+{
+	struct mchp_otpc_packet *packet;
+
+	list_for_each_entry(packet, &otpc->packets, list) {
+		if (packet->tag == tag)
+			return packet;
+	}
+
+	return NULL;
+}
+
+/**
+ * mchp_otpc_resolve_packet() - resolve offset to packet
+ * @otpc: OTPC private data
+ * @off: NVMEM offset (legacy ID-based or TAG-based)
+ *
+ * Legacy offsets (multiples of 4 within valid ID range) are resolved
+ * through ID lookup. Other offsets are treated as 4-byte ASCII tags.
+ *
+ * Return: pointer to packet if found, NULL otherwise
+ */
+static struct mchp_otpc_packet *mchp_otpc_resolve_packet(struct mchp_otpc *otpc,
+							 u32 off)
+{
+	/*
+	 * Legacy id based packet access: offset = id * 4
+	 * Inside the driver we use continuous unsigned integer numbers
+	 * for packet id, thus divide off by 4 before passing it to
+	 * mchp_otpc_id_to_packet().
+	 */
+
+	if (!(off % 4) && (off / 4) < otpc->npackets)
+		return mchp_otpc_id_to_packet(otpc, off / 4);
+
+	/*
+	 * TAG-based packet access: offset is a 4-byte ASCII tag
+	 */
+	return mchp_otpc_tag_to_packet(otpc, off);
+}
+
 static int mchp_otpc_prepare_read(struct mchp_otpc *otpc,
 				  unsigned int offset)
 {
@@ -140,8 +197,29 @@ static int mchp_otpc_prepare_read(struct mchp_otpc *otpc,
  * offset returned by hardware.
  *
  * For this, the read function will return the first requested bytes in the
- * packet. The user will have to be aware of the memory footprint before doing
- * the read request.
+ * packet.
+ *
+ * Two offset encoding are supported:
+ *
+ * 1. Legacy ID-based: offset = OTP_PKT(id) = id * 4
+ *    Used in DT as: reg = <OTP_PKT(1) 76>;
+ * 2. TAG-based: offset = 4-byte ASCII packet tag
+ *    Used in DT as: reg = <0x41435354 0x4c>; (tag "ACST")
+ *
+ * To use the legacy ID based packet lookup the user will have to be aware of
+ * the memory footprint before doing the read request.
+ *
+ * But by using the TAG based packet lookup, the user won't have to be aware
+ * of the memory footprint before doing the read request since this driver has
+ * it abstracted and taken care of.
+ *
+ * Practically, there is no way of knowing the mapping of the OTP memory table
+ * in advance for every device. But by using the packet tag - the identifier
+ * ASCII value, the packets can be recognized without being aware of the
+ * flashed OTP memory map table and the payload can be acquired reliably.
+ *
+ * While the legacy ID based lookup is still supported, TAG based approach is
+ * recommended.
  */
 static int mchp_otpc_read(void *priv, unsigned int off, void *val,
 			  size_t bytes)
@@ -154,12 +232,11 @@ static int mchp_otpc_read(void *priv, unsigned int off, void *val,
 	int ret, payload_size;
 
 	/*
-	 * We reach this point with off being multiple of stride = 4 to
-	 * be able to cross the subsystem. Inside the driver we use continuous
-	 * unsigned integer numbers for packet id, thus divide off by 4
-	 * before passing it to mchp_otpc_id_to_packet().
+	 * From this point the offset has to be translated into the actual
+	 * packet. For this we traverse the table of contents stored in a list
+	 * "packet" based on the access type - packet id or tag.
 	 */
-	packet = mchp_otpc_id_to_packet(otpc, off / 4);
+	packet = mchp_otpc_resolve_packet(otpc, off);
 	if (!packet)
 		return -EINVAL;
 	offset = packet->offset;
@@ -190,6 +267,29 @@ static int mchp_otpc_read(void *priv, unsigned int off, void *val,
 	return 0;
 }
 
+/**
+ * mchp_otpc_read_packet_tag() - read tag from packet payload
+ * @otpc: OTPC private data
+ * @offset: packet offset in OTP memory
+ * @val: pointer to store the tag value
+ *
+ * Return: 0 on success, negative errno on failure
+ */
+static int mchp_otpc_read_packet_tag(struct mchp_otpc *otpc, unsigned int offset,
+				     unsigned int *val)
+{
+	int ret;
+
+	ret = mchp_otpc_prepare_read(otpc, offset);
+	if (ret)
+		return ret;
+
+	writel_relaxed(0, otpc->base + MCHP_OTPC_AR);
+	*val = readl_relaxed(otpc->base + MCHP_OTPC_DR);
+
+	return 0;
+}
+
 static int mchp_otpc_init_packets_list(struct mchp_otpc *otpc, u32 *size)
 {
 	struct mchp_otpc_packet *packet;
@@ -215,6 +315,17 @@ static int mchp_otpc_init_packets_list(struct mchp_otpc *otpc, u32 *size)
 
 		packet->id = id++;
 		packet->offset = word_pos;
+		packet->type = FIELD_GET(MCHP_OTPC_HR_PACKET_TYPE, word);
+
+		if (packet->type == PACKET_TYPE_REGULAR) {
+			ret = mchp_otpc_read_packet_tag(otpc, packet->offset,
+							&packet->tag);
+			if (ret)
+				return ret;
+		} else {
+			packet->tag = 0;
+		}
+
 		INIT_LIST_HEAD(&packet->list);
 		list_add_tail(&packet->list, &otpc->packets);
 
@@ -236,7 +347,7 @@ static struct nvmem_config mchp_nvmem_config = {
 	.type = NVMEM_TYPE_OTP,
 	.read_only = true,
 	.word_size = 4,
-	.stride = 4,
+	.stride = 1,
 	.reg_read = mchp_otpc_read,
 };
 
@@ -244,8 +355,9 @@ static int mchp_otpc_probe(struct platform_device *pdev)
 {
 	struct nvmem_device *nvmem;
 	struct mchp_otpc *otpc;
-	u32 size;
+	u32 size, tmp;
 	int ret;
+	bool emul_enable;
 
 	otpc = devm_kzalloc(&pdev->dev, sizeof(*otpc), GFP_KERNEL);
 	if (!otpc)
@@ -256,10 +368,22 @@ static int mchp_otpc_probe(struct platform_device *pdev)
 		return PTR_ERR(otpc->base);
 
 	otpc->dev = &pdev->dev;
+
+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_MR);
+	emul_enable = tmp & MCHP_OTPC_MR_EMUL;
+	if (emul_enable)
+		dev_info(otpc->dev, "Emulation mode enabled\n");
+
 	ret = mchp_otpc_init_packets_list(otpc, &size);
 	if (ret)
 		return ret;
 
+	if (!size) {
+		dev_warn(otpc->dev, "Cannot access OTP memory\n");
+		if (!emul_enable)
+			dev_info(otpc->dev, "Boot packet not programmed and emulation mode disabled\n");
+	}
+
 	mchp_nvmem_config.dev = otpc->dev;
 	mchp_nvmem_config.add_legacy_fixed_of_cells = true;
 	mchp_nvmem_config.size = size;
diff --git a/include/dt-bindings/nvmem/microchip,sama7g5-otpc.h b/include/dt-bindings/nvmem/microchip,sama7g5-otpc.h
index f570b23165a2..5f72e75ad091 100644
--- a/include/dt-bindings/nvmem/microchip,sama7g5-otpc.h
+++ b/include/dt-bindings/nvmem/microchip,sama7g5-otpc.h
@@ -4,8 +4,8 @@
 #define _DT_BINDINGS_NVMEM_MICROCHIP_OTPC_H
 
 /*
- * Need to have it as a multiple of 4 as NVMEM memory is registered with
- * stride = 4.
+ * Need to have it as a multiple of 4 for the legacy id based packet
+ * access.
  */
 #define OTP_PKT(id)			((id) * 4)
 
-- 
2.34.1

Re: [PATCH v2 05/12] nvmem: microchip-otpc: add tag-based packet lookup

[Andy Shevchenko]

On Tue, Jun 23, 2026 at 04:29:37PM +0530, Varshini Rajendran wrote:
> Add support for accessing OTP packets by their 4-byte ASCII tag while
> preserving backward compatibility with the existing ID-based lookup.
> 
> The OTP memory layout can vary across devices and may change over time,
> making the packet ID approach unreliable when the memory map is not
> known in advance. The packet tag provides a reliable way to identify
> and access packets without prior knowledge of the OTP memory layout.
> 
> Two offset encoding are now supported:
>   1. Legacy ID-based: offset = OTP_PKT(id) = id * 4
>      Used in DT as: reg = <OTP_PKT(1) 76>;
>   2. TAG-based: offset = 4-byte ASCII packet tag
>      Used in DT as: reg = <0x41435354 0x4c>; (tag "ACST")
> 
> The driver resolves offsets matching valid legacy selectors (multiples
> of 4 within the packet count) through ID lookup, falling back to tag
> lookup for other values. This ensures existing device trees continue
> to work while enabling new tag-based access.
> 
> During probe, packet meta data including the tag is read and cached.
> The driver also validates OTP memory accessibility and emulation mode
> status. When the boot packet is not configured, emulation mode allows
> access to the other packets. When both are not available an
> informational message is logged.
> 
> The stride of the nvmem memory is set to 1 in order to support tag based
> offsets, comment in the header file is updated accordingly.

...

>  #define MCHP_OTPC_SIZE			(11 * 1024)

Side note: At some point maybe (11 * SZ_1K) with help of sizes.h?

...

> +/**
> + * mchp_otpc_resolve_packet() - resolve offset to packet
> + * @otpc: OTPC private data
> + * @off: NVMEM offset (legacy ID-based or TAG-based)
> + *
> + * Legacy offsets (multiples of 4 within valid ID range) are resolved
> + * through ID lookup. Other offsets are treated as 4-byte ASCII tags.
> + *
> + * Return: pointer to packet if found, NULL otherwise
> + */
> +static struct mchp_otpc_packet *mchp_otpc_resolve_packet(struct mchp_otpc *otpc,
> +							 u32 off)
> +{
> +	/*
> +	 * Legacy id based packet access: offset = id * 4
> +	 * Inside the driver we use continuous unsigned integer numbers
> +	 * for packet id, thus divide off by 4 before passing it to
> +	 * mchp_otpc_id_to_packet().
> +	 */
> +
> +	if (!(off % 4) && (off / 4) < otpc->npackets)
> +		return mchp_otpc_id_to_packet(otpc, off / 4);

Hmm... I was thinking about something like temporary variables for these two.
Note, in some cases the compiler may issue a single instruction when it sees
both together. That's why in many GPIO drivers we use something like

	unsigned int offset = foo / 8;
	unsigned int shift = foo % 8;

or similar.

> +	/*
> +	 * TAG-based packet access: offset is a 4-byte ASCII tag
> +	 */
> +	return mchp_otpc_tag_to_packet(otpc, off);
> +}

...

>  {
>  	struct nvmem_device *nvmem;
>  	struct mchp_otpc *otpc;
> -	u32 size;
> +	u32 size, tmp;
>  	int ret;
> +	bool emul_enable;

Perhaps keep the reversed xmas tree order?

-- 
With Best Regards,
Andy Shevchenko

[PATCH v2 06/12] ARM: dts: microchip: sama7d65: add cpu opps

[Varshini Rajendran]

Add CPU OPPs table for SAMA7D65.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 36 +++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index 67253bbc08df..94d49e20dc79 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -35,6 +35,7 @@ cpu0: cpu@0 {
 			d-cache-size = <0x8000>;	// L1, 32 KB
 			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
+			operating-points-v2 = <&cpu_opp_table>;
 
 			L2: l2-cache {
 				compatible = "cache";
@@ -45,6 +46,41 @@ L2: l2-cache {
 		};
 	};
 
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
+		};
+	};
+
 	clocks {
 		main_xtal: clock-mainxtal {
 			compatible = "fixed-clock";
-- 
2.34.1

[PATCH v2 07/12] ARM: dts: microchip: sama7d65: Add ADC node

[Varshini Rajendran]

Add node for the ADC controller in sama7d65 SoC.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 29 +++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index 94d49e20dc79..ba775459a816 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/mfd/at91-usart.h>
@@ -95,6 +96,16 @@ slow_xtal: clock-slowxtal {
 		};
 	};
 
+	vddout25: fixed-regulator-vddout25 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDOUT25";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		status = "disabled";
+	};
+
 	ns_sram: sram@100000 {
 		compatible = "mmio-sram";
 		reg = <0x100000 0x20000>;
@@ -296,6 +307,24 @@ can4: can@e0838000 {
 			status = "disabled";
 		};
 
+		adc: adc@e1000000 {
+			compatible = "microchip,sama7d65-adc";
+			reg = <0xe1000000 0x200>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_GCK 25>;
+			assigned-clocks = <&pmc PMC_TYPE_GCK 25>;
+			assigned-clock-rates = <100000000>;
+			clock-names = "adc_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
+			dma-names = "rx";
+			atmel,min-sample-rate-hz = <200000>;
+			atmel,max-sample-rate-hz = <20000000>;
+			atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+			atmel,startup-time-ms = <4>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
 		dma2: dma-controller@e1200000 {
 			compatible = "microchip,sama7d65-dma", "microchip,sama7g5-dma";
 			reg = <0xe1200000 0x1000>;
-- 
2.34.1

[PATCH v2 08/12] ARM: dts: microchip: sama7d65_curiosity: Enable ADC, DVFS

[Varshini Rajendran]

Add regulator, pinmux and enable ADC for sama7d65 curiosity. Add
cpu-supply regulator for DVFS.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 .../dts/microchip/at91-sama7d65_curiosity.dts | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
index 927c27260b6c..a6a44a176f56 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -97,6 +97,18 @@ &can3 {
 	status = "okay";
 };
 
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
 &dma0 {
 	status = "okay";
 };
@@ -334,6 +346,16 @@ &main_xtal {
 };
 
 &pioa {
+	pinctrl_adc_default: adc-default {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_adtrg_default: adtrg-default {
+		pinmux = <PIN_PB7__ADTRG>;
+		bias-pull-up;
+	};
+
 	pinctrl_can1_default: can1-default {
 		pinmux = <PIN_PD10__CANTX1>,
 			 <PIN_PD11__CANRX1>;
@@ -457,3 +479,8 @@ input@0 {
 &slow_xtal {
 	clock-frequency = <32768>;
 };
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
-- 
2.34.1

[PATCH v2 09/12] ARM: dts: microchip: sama7d65: add otpc node

[Varshini Rajendran]

Add OTPC node along with temperature calibration cell.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index ba775459a816..5867fda378b1 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
 
 / {
 	model = "Microchip SAMA7D65 family SoC";
@@ -1112,6 +1113,21 @@ ddr3phy: ddr3phy@e3804000 {
 			reg = <0xe3804000 0x1000>;
 		};
 
+		otpc: efuse@e8c00000 {
+			compatible = "microchip,sama7d65-otpc", "microchip,sama7g5-otpc", "syscon";
+			reg = <0xe8c00000 0x100>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				temperature_calib: calib@41435354 {
+					reg = <0x41435354 0x2c>;	/* Temp calib data packet TAG */
+				};
+			};
+		};
+
 		gic: interrupt-controller@e8c11000 {
 			compatible = "arm,cortex-a7-gic";
 			reg = <0xe8c11000 0x1000>,
-- 
2.34.1

[PATCH v2 10/12] ARM: dts: microchip: sama7d65: add cells for temperature calibration

[Varshini Rajendran]

Add NVMEM cell to ADC for temperature calibration data.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index 5867fda378b1..c336f863406d 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -323,6 +323,8 @@ adc: adc@e1000000 {
 			atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
 			atmel,startup-time-ms = <4>;
 			#io-channel-cells = <1>;
+			nvmem-cells = <&temperature_calib>;
+			nvmem-cell-names = "temperature_calib";
 			status = "disabled";
 		};
 
-- 
2.34.1

[PATCH v2 11/12] ARM: dts: microchip: sama7d65: add temperature sensor

[Varshini Rajendran]

Add temperature sensor node.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index c336f863406d..89904397d021 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -120,6 +120,13 @@ pmu {
 		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>;
+		io-channel-names = "sensor-channel";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
-- 
2.34.1

[PATCH v2 12/12] ARM: dts: microchip: sama7d65: add thermal zones node

[Varshini Rajendran]

Add thermal zones node with its associated trips and cooling-maps.
It uses CPUFreq as cooling device for temperatures in the interval
[90, 100) degrees Celsius and describe the temperature of 100 degrees
Celsius as critical temperature. System will shut down when reaching
critical temperature.

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/boot/dts/microchip/sama7d65.dtsi | 42 +++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index 89904397d021..f2140010d337 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -16,6 +16,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/mfd/at91-usart.h>
 #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Microchip SAMA7D65 family SoC";
@@ -38,6 +39,7 @@ cpu0: cpu@0 {
 			i-cache-size = <0x8000>;	// L1, 32 KB
 			next-level-cache = <&L2>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 
 			L2: l2-cache {
 				compatible = "cache";
@@ -127,6 +129,46 @@ thermal_sensor: thermal-sensor {
 		io-channel-names = "sensor-channel";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&thermal_sensor>;
+
+			trips {
+				cpu_normal: cpu-alert0 {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_hot: cpu-alert1 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_normal>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
-- 
2.34.1