[PATCH net v2 1/2] net: stmmac: dwmac-spacemit: Fix wrong phy interface definition

[Inochi Amaoto <inochiama@gmail.com>]

The current MII interface register definition from the vendor is wrong,
use the right number for the macro. Also, correct the interface mask
in spacemit_set_phy_intf_sel() so it can update the register with the
right number

Fixes: 30f0ba420ed3 ("net: stmmac: Add glue layer for Spacemit K3 SoC")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
index 223754cc5c79..3bfb6d49be6c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-spacemit.c
@@ -18,8 +18,10 @@
 #include "stmmac_platform.h"
 
 /* ctrl register bits */
-#define CTRL_PHY_INTF_RGMII		BIT(3)
-#define CTRL_PHY_INTF_MII		BIT(4)
+#define CTRL_PHY_INTF_MODE		GENMASK(4, 3)
+#define CTRL_PHY_INTF_RMII		FIELD_PREP(CTRL_PHY_INTF_MODE, 0)
+#define CTRL_PHY_INTF_RGMII		FIELD_PREP(CTRL_PHY_INTF_MODE, 1)
+#define CTRL_PHY_INTF_MII		FIELD_PREP(CTRL_PHY_INTF_MODE, 3)
 #define CTRL_WAKE_IRQ_EN		BIT(9)
 #define CTRL_PHY_IRQ_EN			BIT(12)
 
@@ -118,7 +120,7 @@ static void spacemit_get_interfaces(struct stmmac_priv *priv, void *bsp_priv,
 
 static int spacemit_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
 {
-	unsigned int mask = CTRL_PHY_INTF_MII | CTRL_PHY_INTF_RGMII;
+	unsigned int mask = CTRL_PHY_INTF_MODE;
 	struct spacmit_dwmac *dwmac = bsp_priv;
 	unsigned int val = 0;
 
@@ -128,6 +130,7 @@ static int spacemit_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
 		break;
 
 	case PHY_INTF_SEL_RMII:
+		val = CTRL_PHY_INTF_RMII;
 		break;
 
 	case PHY_INTF_SEL_RGMII:
-- 
2.54.0