* [PATCH v3 1/3] dt-bindings: phy: aspeed: Document AST2700 USB3.2 PHY
2026-07-01 6:58 [PATCH v3 0/3] Add AST2700 USB3.2 PHY driver Ryan Chen
@ 2026-07-01 6:58 ` Ryan Chen
2026-07-01 6:58 ` [PATCH v3 2/3] phy: aspeed: Add AST2700 USB3.2 PHY driver Ryan Chen
2026-07-01 6:58 ` [PATCH v3 3/3] MAINTAINERS: Add ASPEED USB3 " Ryan Chen
2 siblings, 0 replies; 4+ messages in thread
From: Ryan Chen @ 2026-07-01 6:58 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Joel Stanley, Andrew Jeffery, Philipp Zabel
Cc: linux-phy, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Ryan Chen, Krzysztof Kozlowski
Document AST2700 USB3.2 PHY. This IP is connected between
USB3 controller and PHY module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
.../bindings/phy/aspeed,ast2700-usb3-phy.yaml | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/aspeed,ast2700-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/aspeed,ast2700-usb3-phy.yaml
new file mode 100644
index 000000000000..b83037aa0438
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/aspeed,ast2700-usb3-phy.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/aspeed,ast2700-usb3-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2700 USB 3.2 PHY
+
+maintainers:
+ - Ryan Chen <ryan_chen@aspeedtech.com>
+
+properties:
+ compatible:
+ const: aspeed,ast2700-usb3-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed,ast2700-scu.h>
+ #include <dt-bindings/reset/aspeed,ast2700-scu.h>
+
+ usb-phy@12010000 {
+ compatible = "aspeed,ast2700-usb3-phy";
+ reg = <0x12010000 0xc0>;
+ clocks = <&syscon0 SCU0_CLK_GATE_PORTAUSB2CLK>;
+ resets = <&syscon0 SCU0_RESET_PORTA_PHY3>;
+ #phy-cells = <0>;
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v3 2/3] phy: aspeed: Add AST2700 USB3.2 PHY driver
2026-07-01 6:58 [PATCH v3 0/3] Add AST2700 USB3.2 PHY driver Ryan Chen
2026-07-01 6:58 ` [PATCH v3 1/3] dt-bindings: phy: aspeed: Document AST2700 USB3.2 PHY Ryan Chen
@ 2026-07-01 6:58 ` Ryan Chen
2026-07-01 6:58 ` [PATCH v3 3/3] MAINTAINERS: Add ASPEED USB3 " Ryan Chen
2 siblings, 0 replies; 4+ messages in thread
From: Ryan Chen @ 2026-07-01 6:58 UTC (permalink / raw)
To: Vinod Koul, Neil Armstrong, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Joel Stanley, Andrew Jeffery, Philipp Zabel
Cc: linux-phy, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Ryan Chen
Add AST2700 USB3.2 PHY driver support.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/aspeed/Kconfig | 15 +++
drivers/phy/aspeed/Makefile | 2 +
drivers/phy/aspeed/phy-aspeed-usb3.c | 236 +++++++++++++++++++++++++++++++++++
5 files changed, 255 insertions(+)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 19f3b7d12b7d..85fa381978f8 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -171,6 +171,7 @@ config PHY_XGENE
source "drivers/phy/allwinner/Kconfig"
source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/apple/Kconfig"
+source "drivers/phy/aspeed/Kconfig"
source "drivers/phy/axiado/Kconfig"
source "drivers/phy/broadcom/Kconfig"
source "drivers/phy/cadence/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index d7aa516bcc49..c6dd02003bbe 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_GENERIC_PHY) += allwinner/ \
amlogic/ \
apple/ \
+ aspeed/ \
axiado/ \
broadcom/ \
cadence/ \
diff --git a/drivers/phy/aspeed/Kconfig b/drivers/phy/aspeed/Kconfig
new file mode 100644
index 000000000000..7b5f48db2be8
--- /dev/null
+++ b/drivers/phy/aspeed/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# PHY drivers for ASPEED
+#
+
+config PHY_ASPEED_USB3
+ tristate "ASPEED USB3 PHY driver"
+ select GENERIC_PHY
+ depends on (ARCH_ASPEED || COMPILE_TEST)
+ help
+ Enable this to support the USB 3.2 PHY on the Aspeed AST2700 SoC.
+ It supports SuperSpeedPlus Gen2x1 (10 Gbps), SuperSpeed (5 Gbps),
+ High Speed (480 Mbps), Full Speed (12 Mbps) and Low Speed
+ (1.5 Mbps), and is paired with the DWC3 USB controller.
diff --git a/drivers/phy/aspeed/Makefile b/drivers/phy/aspeed/Makefile
new file mode 100644
index 000000000000..d96d9d73a009
--- /dev/null
+++ b/drivers/phy/aspeed/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_ASPEED_USB3) += phy-aspeed-usb3.o
diff --git a/drivers/phy/aspeed/phy-aspeed-usb3.c b/drivers/phy/aspeed/phy-aspeed-usb3.c
new file mode 100644
index 000000000000..eff148faa14c
--- /dev/null
+++ b/drivers/phy/aspeed/phy-aspeed-usb3.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2026 Aspeed Technology Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#define PHY3S00 0x00
+#define PHY3S00_INIT_DONE BIT(15)
+#define PHY3S00_SRAM_BYPASS BIT(7)
+#define PHY3S00_SRAM_EXT_LOAD BIT(6)
+#define PHY3S04 0x04
+#define PHY3C00 0x08
+#define PHY3C04 0x0C
+#define PHY3P00 0x10
+#define PHY3P00_RX_ADAPT_AFE_EN_G1 BIT(0)
+#define PHY3P00_RX_ADAPT_AFE_EN_G2 BIT(1)
+#define PHY3P00_RX_ADAPT_DFE_EN_G1 BIT(2)
+#define PHY3P00_RX_ADAPT_DFE_EN_G2 BIT(3)
+#define PHY3P00_RX_CDR_VCO_LOWFREQ_G1 BIT(4)
+#define PHY3P00_RX_CDR_VCO_LOWFREQ_G2 BIT(5)
+#define PHY3P00_RX_EQ_AFE_GAIN_G1 GENMASK(9, 6)
+#define PHY3P00_RX_EQ_AFE_GAIN_G2 GENMASK(13, 10)
+#define PHY3P00_RX_EQ_ATT_LVL_G1 GENMASK(16, 14)
+#define PHY3P00_RX_EQ_ATT_LVL_G2 GENMASK(19, 17)
+#define PHY3P00_RX_EQ_CTLE_BOOST_G1 GENMASK(24, 20)
+#define PHY3P00_RX_EQ_CTLE_BOOST_G2 GENMASK(29, 25)
+#define PHY3P00_RX_EQ_DELTA_IQ_G1_LO GENMASK(31, 30)
+
+#define PHY3P04 0x14
+#define PHY3P04_RX_EQ_DELTA_IQ_G1_HI GENMASK(1, 0)
+#define PHY3P04_RX_EQ_DELTA_IQ_G2 GENMASK(5, 2)
+#define PHY3P04_RX_EQ_DFE_TAP1_G1 GENMASK(13, 6)
+#define PHY3P04_RX_EQ_DFE_TAP1_G2 GENMASK(21, 14)
+#define PHY3P04_RX_LOS_LFPS_EN BIT(22)
+#define PHY3P04_RX_LOS_THRESHOLD GENMASK(25, 23)
+#define PHY3P04_RX_TERM_CTRL GENMASK(28, 26)
+#define PHY3P04_TX_EQ_MAIN_G1_LO GENMASK(31, 29)
+
+#define PHY3P08 0x18
+#define PHY3P08_TX_EQ_MAIN_G1_HI GENMASK(1, 0)
+#define PHY3P08_TX_EQ_MAIN_G2 GENMASK(6, 2)
+#define PHY3P08_TX_EQ_OVRD BIT(7)
+#define PHY3P08_TX_EQ_POST_G1 GENMASK(12, 9)
+#define PHY3P08_TX_EQ_POST_G2 GENMASK(16, 13)
+#define PHY3P08_TX_EQ_PRE_G1 GENMASK(20, 17)
+#define PHY3P08_TX_EQ_PRE_G2 GENMASK(24, 21)
+#define PHY3P08_TX_IBOOST_LVL GENMASK(28, 25)
+#define PHY3P08_TX_TERM_CTRL GENMASK(31, 29)
+
+#define PHY3P0C 0x1C
+#define PHY3P0C_TX_VBOOST_EN BIT(0)
+
+#define PHY3CMD 0x40
+
+#define PHY3P_RX_EQ_CTLE_BOOST_G1_DEFAULT 0x7
+#define PHY3P_RX_EQ_CTLE_BOOST_G2_DEFAULT 0x7
+#define PHY3P_RX_EQ_DELTA_IQ_G1_DEFAULT 0x3
+#define PHY3P_RX_EQ_DELTA_IQ_G2_DEFAULT 0x5
+#define PHY3P_RX_LOS_THRESHOLD_DEFAULT 0x3
+#define PHY3P_RX_TERM_CTRL_DEFAULT 0x2
+#define PHY3P_TX_EQ_MAIN_G1_DEFAULT 0xa
+#define PHY3P_TX_EQ_MAIN_G2_DEFAULT 0x9
+#define PHY3P_TX_EQ_POST_G1_DEFAULT 0x4
+#define PHY3P_TX_EQ_POST_G2_DEFAULT 0x3
+#define PHY3P_TX_EQ_PRE_G2_DEFAULT 0x2
+#define PHY3P_TX_IBOOST_LVL_DEFAULT 0xf
+#define PHY3P_TX_TERM_CTRL_DEFAULT 0x2
+
+#define PHY3P00_DEFAULT ( \
+ PHY3P00_RX_ADAPT_AFE_EN_G1 | \
+ PHY3P00_RX_ADAPT_AFE_EN_G2 | \
+ PHY3P00_RX_ADAPT_DFE_EN_G1 | \
+ PHY3P00_RX_ADAPT_DFE_EN_G2 | \
+ FIELD_PREP(PHY3P00_RX_EQ_CTLE_BOOST_G1, PHY3P_RX_EQ_CTLE_BOOST_G1_DEFAULT) | \
+ FIELD_PREP(PHY3P00_RX_EQ_CTLE_BOOST_G2, PHY3P_RX_EQ_CTLE_BOOST_G2_DEFAULT) | \
+ FIELD_PREP(PHY3P00_RX_EQ_DELTA_IQ_G1_LO, \
+ PHY3P_RX_EQ_DELTA_IQ_G1_DEFAULT & 0x3) \
+)
+
+#define PHY3P04_DEFAULT ( \
+ FIELD_PREP(PHY3P04_RX_EQ_DELTA_IQ_G1_HI, \
+ PHY3P_RX_EQ_DELTA_IQ_G1_DEFAULT >> 2) | \
+ FIELD_PREP(PHY3P04_RX_EQ_DELTA_IQ_G2, PHY3P_RX_EQ_DELTA_IQ_G2_DEFAULT) | \
+ PHY3P04_RX_LOS_LFPS_EN | \
+ FIELD_PREP(PHY3P04_RX_LOS_THRESHOLD, PHY3P_RX_LOS_THRESHOLD_DEFAULT) | \
+ FIELD_PREP(PHY3P04_RX_TERM_CTRL, PHY3P_RX_TERM_CTRL_DEFAULT) | \
+ FIELD_PREP(PHY3P04_TX_EQ_MAIN_G1_LO, \
+ PHY3P_TX_EQ_MAIN_G1_DEFAULT & 0x7) \
+)
+
+#define PHY3P08_DEFAULT ( \
+ FIELD_PREP(PHY3P08_TX_EQ_MAIN_G1_HI, PHY3P_TX_EQ_MAIN_G1_DEFAULT >> 3) | \
+ FIELD_PREP(PHY3P08_TX_EQ_MAIN_G2, PHY3P_TX_EQ_MAIN_G2_DEFAULT) | \
+ FIELD_PREP(PHY3P08_TX_EQ_POST_G1, PHY3P_TX_EQ_POST_G1_DEFAULT) | \
+ FIELD_PREP(PHY3P08_TX_EQ_POST_G2, PHY3P_TX_EQ_POST_G2_DEFAULT) | \
+ FIELD_PREP(PHY3P08_TX_EQ_PRE_G2, PHY3P_TX_EQ_PRE_G2_DEFAULT) | \
+ FIELD_PREP(PHY3P08_TX_IBOOST_LVL, PHY3P_TX_IBOOST_LVL_DEFAULT) | \
+ FIELD_PREP(PHY3P08_TX_TERM_CTRL, PHY3P_TX_TERM_CTRL_DEFAULT) \
+)
+
+#define PHY3P0C_DEFAULT \
+ PHY3P0C_TX_VBOOST_EN
+
+struct aspeed_usb3_phy {
+ void __iomem *regs;
+ struct reset_control *rst;
+ struct device *dev;
+ struct clk *clk;
+};
+
+static int aspeed_usb3_phy_init(struct phy *phy)
+{
+ struct aspeed_usb3_phy *aspeed_phy = phy_get_drvdata(phy);
+ u32 val;
+ int ret;
+
+ ret = clk_prepare_enable(aspeed_phy->clk);
+ if (ret) {
+ dev_err(aspeed_phy->dev, "Failed to enable clock %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_control_deassert(aspeed_phy->rst);
+ if (ret) {
+ clk_disable_unprepare(aspeed_phy->clk);
+ return ret;
+ }
+
+ /* Wait for USB3 PHY internal SRAM initialization done */
+ ret = readl_poll_timeout(aspeed_phy->regs + PHY3S00, val,
+ val & PHY3S00_INIT_DONE,
+ USEC_PER_MSEC, 10 * USEC_PER_MSEC);
+ if (ret) {
+ dev_err(aspeed_phy->dev, "SRAM init timeout\n");
+ goto err_assert_reset;
+ }
+
+ val = readl(aspeed_phy->regs + PHY3S00);
+ val |= PHY3S00_SRAM_BYPASS;
+ writel(val, aspeed_phy->regs + PHY3S00);
+
+ /* Set protocol1_ext signals as default PHY3 settings based on SNPS documents.
+ * Including PCFGI[54]: protocol1_ext_rx_los_lfps_en for better compatibility
+ */
+ writel(PHY3P00_DEFAULT, aspeed_phy->regs + PHY3P00);
+ writel(PHY3P04_DEFAULT, aspeed_phy->regs + PHY3P04);
+ writel(PHY3P08_DEFAULT, aspeed_phy->regs + PHY3P08);
+ writel(PHY3P0C_DEFAULT, aspeed_phy->regs + PHY3P0C);
+
+ return 0;
+
+err_assert_reset:
+ reset_control_assert(aspeed_phy->rst);
+ clk_disable_unprepare(aspeed_phy->clk);
+ return ret;
+}
+
+static int aspeed_usb3_phy_exit(struct phy *phy)
+{
+ struct aspeed_usb3_phy *aspeed_phy = phy_get_drvdata(phy);
+
+ reset_control_assert(aspeed_phy->rst);
+ clk_disable_unprepare(aspeed_phy->clk);
+
+ return 0;
+}
+
+static const struct phy_ops aspeed_usb3_phy_ops = {
+ .init = aspeed_usb3_phy_init,
+ .exit = aspeed_usb3_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static int aspeed_usb3_phy_probe(struct platform_device *pdev)
+{
+ struct aspeed_usb3_phy *aspeed_phy;
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct phy *phy;
+
+ aspeed_phy = devm_kzalloc(dev, sizeof(*aspeed_phy), GFP_KERNEL);
+ if (!aspeed_phy)
+ return -ENOMEM;
+
+ aspeed_phy->dev = dev;
+
+ aspeed_phy->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(aspeed_phy->clk))
+ return PTR_ERR(aspeed_phy->clk);
+
+ aspeed_phy->rst = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(aspeed_phy->rst))
+ return PTR_ERR(aspeed_phy->rst);
+
+ aspeed_phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(aspeed_phy->regs))
+ return PTR_ERR(aspeed_phy->regs);
+
+ phy = devm_phy_create(dev, NULL, &aspeed_usb3_phy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ phy_set_drvdata(phy, aspeed_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id aspeed_usb3_phy_match_table[] = {
+ {
+ .compatible = "aspeed,ast2700-usb3-phy",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_usb3_phy_match_table);
+
+static struct platform_driver aspeed_usb3_phy_driver = {
+ .probe = aspeed_usb3_phy_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = aspeed_usb3_phy_match_table,
+ },
+};
+module_platform_driver(aspeed_usb3_phy_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ASPEED USB3.2 PHY Driver");
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread