* [PATCH v1 1/1] arm64: dts: freescale: imx95-var-dart: enable NETC block control
@ 2026-07-03 14:49 Stefano Radaelli
0 siblings, 0 replies; only message in thread
From: Stefano Radaelli @ 2026-07-03 14:49 UTC (permalink / raw)
To: linux-kernel, devicetree, imx, linux-arm-kernel
Cc: pierluigi.p, Stefano Radaelli, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Frank Li, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam
From: Stefano Radaelli <stefano.r@variscite.com>
Enable the NETC block control node on the DART-MX95 SoM.
This is required for the NETC Ethernet ports to be enabled and used.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
index d43270a1d907..174ded589d6f 100644
--- a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
@@ -178,6 +178,10 @@ &mu7 {
status = "okay";
};
+&netc_blk_ctrl {
+ status = "okay";
+};
+
&netc_emdio {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emdio>, <&pinctrl_phy0res>;
--
2.47.3
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2026-07-03 14:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-03 14:49 [PATCH v1 1/1] arm64: dts: freescale: imx95-var-dart: enable NETC block control Stefano Radaelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox