[PATCH v6 0/5] Add eDP lane mapping support

[PATCH v6 0/5] Add eDP lane mapping support

[Damon Ding]

This series adds configurable eDP physical lane mapping support via
device tree data-lanes property.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

The series includes driver implementation and device tree binding
updates to support custom lane mapping configuration from endpoint
node, and keeps default linear lane order if no configuration is given.

Patch 1: Add endpoint data-lanes property to analogix-dp binding
Patch 2: Add DRM DP helper API to validate DP lane counts
Patch 3: Restore mandatory for samsung,link-rate and samsung,lane-count
         properties
Patch 4: Add validation for samsung,lane-count property as preparation
Patch 5: Implement lane mapping in analogix_dp driver

Damon Ding (5):
  dt-bindings: display: bridge: analogix-dp: Add data-lanes support for
    endpoint
  drm/dp: Add helper to validate DP lane counts
  drm/bridge: analogix_dp: Restore mandatory samsung DP DT properties
  drm/bridge: analogix_dp: Add validation for samsung,lane-count
    property
  drm/bridge: analogix_dp: Add support for optional data-lanes mapping

 .../bindings/display/bridge/analogix,dp.yaml  | 19 +++--
 .../rockchip/rockchip,analogix-dp.yaml        |  1 +
 .../drm/bridge/analogix/analogix_dp_core.c    | 70 +++++++++++++++++--
 .../drm/bridge/analogix/analogix_dp_core.h    |  4 +-
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 ++--
 .../gpu/drm/bridge/analogix/analogix_dp_reg.h |  4 ++
 include/drm/display/drm_dp_helper.h           |  6 ++
 7 files changed, 101 insertions(+), 18 deletions(-)

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.

Changes in v3:
- Squash [PATCH v2 2/3] into [PATCH v2 1/3].
- Add unevaluatedProperties: false to both the port@1 and endpoint
  nodes.

Changes in v4:
- Add validation for samsung,lane-count property as preparation.

Changes in v5:
- Add DRM DP helper API to validate DP lane counts.
- Apply DRM DP helper API to check the validity of samsung,lane-count
  property.
- Add Acked-by and Reviewed-by tags.

Changes in v6:
- Add a seperate commit to restore mandatory samsung DP DT properties.
- Add Reviewed-by tag.

-- 
2.34.1

[PATCH v6 1/5] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint

[Damon Ding]

Add data-lanes property support to the port@1 endpoint for physical
lane mapping configuration.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Additionally, add data-lanes setting in Rockchip eDP DT node example
to show actual lane mapping usage.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.
- Remove redundant deprecated property 'data-lanes' for eDP node.
- Update port@1 $ref to /schemas/graph.yaml#/$defs/port-base.

Changes in v3:
- Squash data-lanes adjustment of Rockchip eDP DT example into this
  commit.
- Add unevaluatedProperties: false to both the port@1 and endpoint
  nodes.

Changes in v5
- Add Acked-by and Reviewed-by tags.
---
 .../bindings/display/bridge/analogix,dp.yaml  | 19 ++++++++++++++-----
 .../rockchip/rockchip,analogix-dp.yaml        |  1 +
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
index 62f0521b0924..ecf206871cdd 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -42,13 +42,22 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Input node to receive pixel data.
+        description: Input node to receive pixel data.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Port node with one endpoint connected to a dp-connector node.
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Port node with one endpoint connected to sink device node.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
 
     required:
       - port@0
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
index 6548f157fd96..39dafe75a680 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -160,6 +160,7 @@ examples:
           reg = <1>;
 
           edp_out_panel: endpoint {
+            data-lanes = <0 1>;
             remote-endpoint = <&panel_in_edp>;
           };
         };
-- 
2.34.1

[PATCH v6 2/5] drm/dp: Add helper to validate DP lane counts

[Damon Ding]

Add a generic helper function drm_dp_lane_count_is_valid() to check
if a DisplayPort lane count is valid. According to the DP specification,
only 1, 2, or 4 lanes are supported.

This helper avoids duplicating DP lane count validation logic across
individual DisplayPort drivers.

Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v6:
- Add Reviewed-by tag.
---
 include/drm/display/drm_dp_helper.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h
index 8c2d77a032f0..c904cb480d84 100644
--- a/include/drm/display/drm_dp_helper.h
+++ b/include/drm/display/drm_dp_helper.h
@@ -138,6 +138,12 @@ bool drm_dp_as_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_C
 
 int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]);
 
+static inline bool
+drm_dp_lane_count_is_valid(int lane_count)
+{
+	return lane_count == 1 || lane_count == 2 || lane_count == 4;
+}
+
 static inline int
 drm_dp_max_link_rate(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
 {
-- 
2.34.1

[PATCH v6 3/5] drm/bridge: analogix_dp: Restore mandatory samsung DP DT properties

[Damon Ding]

Revert the change that made samsung,link-rate and samsung,lane-count
optional for Exynos DP. Add error checking to fail probe early if the
required DT properties are missing.

If these properties are zero, &link_train.link_rate and
&link_train.lane_count used in the subsequent link training flow will
also be zero, resulting in link training failure. Although all existing
Exynos DP DT nodes already contain these two properties, this potential
logic issue still needs to be fixed.

Fixes: 0d0abd894ead ("drm: bridge: analogix/dp: add max link rate and lane count limit for RK3288")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 8d3d4a6e6ca2..5240efcd3861 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1244,6 +1244,7 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 {
 	struct device_node *dp_node = dp->dev->of_node;
 	struct video_info *video_info = &dp->video_info;
+	u32 val;
 
 	switch (dp->plat_data->dev_type) {
 	case RK3288_DP:
@@ -1265,10 +1266,14 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 		 * NOTE: those property parseing code is used for
 		 * providing backward compatibility for samsung platform.
 		 */
-		of_property_read_u32(dp_node, "samsung,link-rate",
-				     &video_info->max_link_rate);
-		of_property_read_u32(dp_node, "samsung,lane-count",
-				     &video_info->max_lane_count);
+		if (of_property_read_u32(dp_node, "samsung,link-rate", &val))
+			return dev_err_probe(dp->dev, -EINVAL,
+					     "Failed to get samsung,link-rate\n");
+		video_info->max_link_rate = val;
+		if (of_property_read_u32(dp_node, "samsung,lane-count", &val))
+			return dev_err_probe(dp->dev, -EINVAL,
+					     "Failed to get samsung,lane-count\n");
+		video_info->max_lane_count = val;
 		break;
 	}
 
-- 
2.34.1

[PATCH v6 4/5] drm/bridge: analogix_dp: Add validation for samsung,lane-count property

[Damon Ding]

Add validity check for samsung,lane-count to ensure DT-provided
lane count values are specification-compliant.

Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v5:
- Apply DRM DP helper API to check the validity of DP lane count.

Changes in v6:
- Rebase after the new commit for restoring mandatory properties
  samsung,link-rate and samsung,lane-count.
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 5240efcd3861..039e076d2b8a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1270,7 +1270,8 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 			return dev_err_probe(dp->dev, -EINVAL,
 					     "Failed to get samsung,link-rate\n");
 		video_info->max_link_rate = val;
-		if (of_property_read_u32(dp_node, "samsung,lane-count", &val))
+		if (of_property_read_u32(dp_node, "samsung,lane-count", &val) ||
+		    !drm_dp_lane_count_is_valid(val))
 			return dev_err_probe(dp->dev, -EINVAL,
 					     "Failed to get samsung,lane-count\n");
 		video_info->max_lane_count = val;
-- 
2.34.1

[PATCH v6 5/5] drm/bridge: analogix_dp: Add support for optional data-lanes mapping

[Damon Ding]

Parse the optional 'data-lanes' device tree property to support
custom physical lane mapping configuration.

If no valid configuration is found, fall back to the default
lane map (0, 1, 2, 3) automatically and keep the driver running.

Lane mapping is mainly used for below scenarios:
1. Correct PCB lane swap and differential line routing crossover
   without hardware changes;
2. Adapt mismatched lane pin definitions between SoC and eDP panel;
3. Support multiple panel hardware variants on the same board
   by configuring data-lanes in device tree only.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>

---

Changes in v2:
- Add lane mapping application scenarios in commit message.

Changes in v5:
- Add Reviewed-by tag.
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 56 +++++++++++++++++++
 .../drm/bridge/analogix/analogix_dp_core.h    |  4 +-
 .../gpu/drm/bridge/analogix/analogix_dp_reg.c | 15 +++--
 .../gpu/drm/bridge/analogix/analogix_dp_reg.h |  4 ++
 4 files changed, 70 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 039e076d2b8a..cb06347196ce 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1240,6 +1240,59 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.detect = analogix_dp_bridge_detect,
 };
 
+static int analogix_dp_dt_parse_lanes_map(struct analogix_dp_device *dp)
+{
+	struct video_info *video_info = &dp->video_info;
+	struct device_node *endpoint;
+	u32 tmp[LANE_COUNT4];
+	u32 map[LANE_COUNT4] = {0, 1, 2, 3};
+	bool used[LANE_COUNT4] = {false};
+	int num_lanes;
+	int ret, i;
+
+	memcpy(video_info->lane_map, map, sizeof(map));
+
+	num_lanes = drm_of_get_data_lanes_count_ep(dp->dev->of_node, 1, 0, 1,
+						   video_info->max_lane_count);
+	if (num_lanes < 0)
+		return -EINVAL;
+
+	endpoint = of_graph_get_endpoint_by_regs(dp->dev->of_node, 1, -1);
+	if (!endpoint)
+		return -EINVAL;
+
+	ret = of_property_read_u32_array(endpoint, "data-lanes", tmp, num_lanes);
+	of_node_put(endpoint);
+	if (ret)
+		return -EINVAL;
+
+	for (i = 0; i < num_lanes; i++) {
+		if (tmp[i] >= LANE_COUNT4) {
+			dev_dbg(dp->dev, "data-lanes[%d] = %u is out of range\n", i, tmp[i]);
+			return -EINVAL;
+		}
+
+		if (used[tmp[i]]) {
+			dev_dbg(dp->dev, "data-lanes[%d] = %u is duplicate\n", i, tmp[i]);
+			return -EINVAL;
+		}
+
+		used[tmp[i]] = true;
+		map[i] = tmp[i];
+	}
+
+	for (i = 0; i < LANE_COUNT4 && num_lanes < LANE_COUNT4; i++) {
+		if (!used[i])
+			map[num_lanes++] = i;
+	}
+
+	dev_dbg(dp->dev, "Using parsed lane map: <%u %u %u %u>\n", map[0], map[1], map[2], map[3]);
+
+	memcpy(video_info->lane_map, map, sizeof(map));
+
+	return 0;
+}
+
 static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 {
 	struct device_node *dp_node = dp->dev->of_node;
@@ -1278,6 +1331,9 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 		break;
 	}
 
+	if (analogix_dp_dt_parse_lanes_map(dp))
+		dev_dbg(dp->dev, "No valid data-lanes found, using default lane map\n");
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index c7997677a286..4560597604ad 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -137,6 +137,8 @@ struct video_info {
 
 	int max_link_rate;
 	enum link_lane_count_type max_lane_count;
+
+	u32 lane_map[LANE_COUNT4];
 };
 
 struct link_train {
@@ -177,7 +179,7 @@ struct analogix_dp_device {
 /* analogix_dp_reg.c */
 void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable);
 void analogix_dp_stop_video(struct analogix_dp_device *dp);
-void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable);
+void analogix_dp_lane_mapping(struct analogix_dp_device *dp);
 void analogix_dp_init_analog_param(struct analogix_dp_device *dp);
 void analogix_dp_init_interrupt(struct analogix_dp_device *dp);
 void analogix_dp_reset(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index ea8401293a23..c1344a3f013a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -48,16 +48,15 @@ void analogix_dp_stop_video(struct analogix_dp_device *dp)
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_1);
 }
 
-void analogix_dp_lane_swap(struct analogix_dp_device *dp, bool enable)
+void analogix_dp_lane_mapping(struct analogix_dp_device *dp)
 {
+	u32 *lane_map = dp->video_info.lane_map;
 	u32 reg;
 
-	if (enable)
-		reg = LANE3_MAP_LOGIC_LANE_0 | LANE2_MAP_LOGIC_LANE_1 |
-		      LANE1_MAP_LOGIC_LANE_2 | LANE0_MAP_LOGIC_LANE_3;
-	else
-		reg = LANE3_MAP_LOGIC_LANE_3 | LANE2_MAP_LOGIC_LANE_2 |
-		      LANE1_MAP_LOGIC_LANE_1 | LANE0_MAP_LOGIC_LANE_0;
+	reg = lane_map[0] << LANE0_MAP_SHIFT;
+	reg |= lane_map[1] << LANE1_MAP_SHIFT;
+	reg |= lane_map[2] << LANE2_MAP_SHIFT;
+	reg |= lane_map[3] << LANE3_MAP_SHIFT;
 
 	writel(reg, dp->reg_base + ANALOGIX_DP_LANE_MAP);
 }
@@ -140,7 +139,7 @@ void analogix_dp_reset(struct analogix_dp_device *dp)
 
 	usleep_range(20, 30);
 
-	analogix_dp_lane_swap(dp, 0);
+	analogix_dp_lane_mapping(dp);
 
 	writel(0x0, dp->reg_base + ANALOGIX_DP_SYS_CTL_1);
 	writel(0x40, dp->reg_base + ANALOGIX_DP_SYS_CTL_2);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
index 12735139046c..ac914e37089b 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
@@ -209,6 +209,10 @@
 #define LANE0_MAP_LOGIC_LANE_1			(0x1 << 0)
 #define LANE0_MAP_LOGIC_LANE_2			(0x2 << 0)
 #define LANE0_MAP_LOGIC_LANE_3			(0x3 << 0)
+#define LANE3_MAP_SHIFT				(6)
+#define LANE2_MAP_SHIFT				(4)
+#define LANE1_MAP_SHIFT				(2)
+#define LANE0_MAP_SHIFT				(0)
 
 /* ANALOGIX_DP_ANALOG_CTL_1 */
 #define TX_TERMINAL_CTRL_50_OHM			(0x1 << 4)
-- 
2.34.1