Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut+renesas@mailbox.org>
To: linux-pci@vger.kernel.org
Cc: "Marek Vasut" <marek.vasut+renesas@mailbox.org>,
	"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Marc Zyngier" <maz@kernel.org>, "Rob Herring" <robh@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH v4 5/5] arm64: dts: renesas: r8a779g0: Add GICv3 ITS and update PCIe nodes
Date: Tue,  7 Jul 2026 22:35:43 +0200	[thread overview]
Message-ID: <20260707203743.88299-6-marek.vasut+renesas@mailbox.org> (raw)
In-Reply-To: <20260707203743.88299-1-marek.vasut+renesas@mailbox.org>

This SoC implements GIC600 with GICv3 ITS and PCIe host mode on this
SoC can use it. Add GIC ITS node into GIC node, update interrupt-map
and add msi-map into PCIe controller node.

The GIC ITS does have master interface to issue transactions to RAM.
The interface does support cacheable transactions, however, it does
not support shareable attribute, because the AXI port signals are tied
to inactive in this implementation. Therefore, add "dma-noncoherent"
DT property into the GIC ITS subnode.

The GIC redistributor does not have cacheable/shareable, therefore
add "dma-noncoherent" DT property into the GIC node.

Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
---
NOTE: This would not be possible without prior work from Shimoda-san
      https://lore.kernel.org/all/20240214052144.1966569-1-yoshihiro.shimoda.uh@renesas.com/
---
Cc: "Krzysztof Wilczyński" <kwilczynski@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
---
V2: No change
V3: Add Co-developed-by to credit Shimoda-san
V4: No change
---
 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 31 ++++++++++++++++-------
 1 file changed, 22 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index c25642a620db8..dba46499b5e9c 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -809,6 +809,7 @@ pciec0: pcie@e65d0000 {
 			resets = <&cpg 624>;
 			reset-names = "pwr";
 			max-link-speed = <4>;
+			msi-parent = <&its>;
 			num-lanes = <2>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -819,10 +820,10 @@ pciec0: pcie@e65d0000 {
 			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &gic GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>;
 			snps,enable-cdm-check;
 			status = "disabled";
 
@@ -856,6 +857,7 @@ pciec1: pcie@e65d8000 {
 			resets = <&cpg 625>;
 			reset-names = "pwr";
 			max-link-speed = <4>;
+			msi-parent = <&its>;
 			num-lanes = <2>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -866,10 +868,10 @@ pciec1: pcie@e65d8000 {
 			dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>;
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &gic GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic 0 0 GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic 0 0 GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic 0 0 GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
 			snps,enable-cdm-check;
 			status = "disabled";
 
@@ -2148,11 +2150,22 @@ ipmmu_mm: iommu@eefc0000 {
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
-			#address-cells = <0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
 			interrupt-controller;
 			reg = <0x0 0xf1000000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x110000>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			dma-noncoherent;
+
+			ranges = <0x0 0x0 0x0 0xf1000000 0x0 0x200000>;
+
+			its: msi-controller@40000 {
+				compatible = "arm,gic-v3-its";
+				reg = <0x0 0x40000 0x0 0x20000>;
+				dma-noncoherent;
+				msi-controller;
+			};
 		};
 
 		gpu: gpu@fd000000 {
-- 
2.53.0



  parent reply	other threads:[~2026-07-07 20:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-07 20:35 [PATCH v4 0/5] PCI: rcar-gen4: irqchip/gic-v3: Handle GIC ITS Marek Vasut
2026-07-07 20:35 ` [PATCH v4 1/5] PCI: dwc: Determine whether iMSI is used before calling .init Marek Vasut
2026-07-07 20:35 ` [PATCH v4 2/5] PCI: rcar-gen4: Configure AXIINTC if iMSI-RX not used Marek Vasut
2026-07-07 20:35 ` [PATCH v4 4/5] irqchip/gic-v3: Add Renesas R-Car Gen4 erratum workaround Marek Vasut
2026-07-07 20:35 ` Marek Vasut [this message]
2026-07-09 12:19 ` [PATCH v4 0/5] PCI: rcar-gen4: irqchip/gic-v3: Handle GIC ITS Manivannan Sadhasivam
2026-07-09 12:33   ` Marek Vasut
2026-07-09 12:41     ` Manivannan Sadhasivam
2026-07-09 12:43     ` Marc Zyngier
2026-07-09 12:57       ` Manivannan Sadhasivam
2026-07-09 15:22         ` Marek Vasut
2026-07-09 12:57 ` (subset) " Manivannan Sadhasivam
2026-07-09 12:59   ` Manivannan Sadhasivam
2026-07-09 15:23     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260707203743.88299-6-marek.vasut+renesas@mailbox.org \
    --to=marek.vasut+renesas@mailbox.org \
    --cc=bhelgaas@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzk+dt@kernel.org \
    --cc=kwilczynski@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=maz@kernel.org \
    --cc=robh@kernel.org \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox