Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Wolfram Sang <wsa+renesas@sang-engineering.com>,
	 Michael Hennerich <michael.hennerich@analog.com>,
	 Bartosz Golaszewski <brgl@bgdev.pl>,
	Andi Shyti <andi.shyti@kernel.org>,
	 Andy Shevchenko <andriy.shevchenko@intel.com>,
	 Bartosz Golaszewski <brgl@kernel.org>,
	Peter Rosin <peda@lysator.liu.se>,
	 Peter Rosin <peda@lysator.liu.se>
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	 Marcus Folkesson <marcus.folkesson@gmail.com>
Subject: [PATCH v10 2/7] i2c: mux: add idle_state property to i2c_mux_core
Date: Wed, 08 Jul 2026 14:16:14 +0200	[thread overview]
Message-ID: <20260708-i2c-mux-v10-2-09dca03c8a15@gmail.com> (raw)
In-Reply-To: <20260708-i2c-mux-v10-0-09dca03c8a15@gmail.com>

Muxes treat their channels differently when idle.
Let the mux core have this information to make it available for
internal use.
Reuse the same state values used by CONFIG_MULTIPLEXER.

Possible idle states are:
- MUX_IDLE_AS_IS: Leave channels as is when idle
- MUX_IDLE_DISCONNECT: Disconnect channel (set HiZ when idle)
- <n>: Enable channel n when idle

Default value is set to MUX_IDLE_AS_IS.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---
 drivers/i2c/i2c-mux.c   |  1 +
 include/linux/i2c-mux.h | 26 ++++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 681a201c239b..edf16683dc83 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -247,6 +247,7 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
 	muxc->select = select;
 	muxc->deselect = deselect;
 	muxc->max_adapters = max_adapters;
+	muxc->idle_state = MUX_IDLE_AS_IS;
 
 	return muxc;
 }
diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 1784ac7afb11..624fadbaa703 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -13,6 +13,7 @@
 
 #ifdef __KERNEL__
 
+#include <dt-bindings/mux/mux.h>
 #include <linux/bitops.h>
 
 struct i2c_mux_core {
@@ -22,6 +23,17 @@ struct i2c_mux_core {
 	unsigned int arbitrator:1;
 	unsigned int gate:1;
 
+	/*
+	 * The mux controller state to use when inactive.
+	 * Possible idle states are:
+	 *  - MUX_IDLE_AS_IS: Leave channels as is when idle
+	 *  - MUX_IDLE_DISCONNECT: Disconnect channel (set HiZ when idle)
+	 *  - <n>: Enable channel n when idle
+	 *
+	 * Default value is set to MUX_IDLE_AS_IS.
+	 */
+	int idle_state;
+
 	void *priv;
 
 	int (*select)(struct i2c_mux_core *, u32 chan_id);
@@ -38,6 +50,20 @@ struct i2c_mux_core *i2c_mux_alloc(struct i2c_adapter *parent,
 				   int (*select)(struct i2c_mux_core *, u32),
 				   int (*deselect)(struct i2c_mux_core *, u32));
 
+/*
+ * Mux drivers may only change idle_state, and may only do so
+ * between allocation and registration of the mux controller.
+ */
+static inline void i2c_mux_set_idle_state(struct i2c_mux_core *muxc, int state)
+{
+	muxc->idle_state = state;
+}
+
+static inline int i2c_mux_idle_state(struct i2c_mux_core *muxc)
+{
+	return muxc->idle_state;
+}
+
 /* flags for i2c_mux_alloc */
 #define I2C_MUX_LOCKED     BIT(0)
 #define I2C_MUX_ARBITRATOR BIT(1)

-- 
2.54.0



  parent reply	other threads:[~2026-07-08 12:17 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-08 12:16 [PATCH v10 0/7] I2C Mux per channel bus speed Marcus Folkesson
2026-07-08 12:16 ` [PATCH v10 1/7] i2c: core: add callback to change bus frequency Marcus Folkesson
2026-07-08 12:16 ` Marcus Folkesson [this message]
2026-07-08 12:16 ` [PATCH v10 3/7] i2c: mux: add support for per channel " Marcus Folkesson
2026-07-08 12:16 ` [PATCH v10 4/7] i2c: davinci: calculate bus freq from Hz instead of kHz Marcus Folkesson
2026-07-08 19:30   ` Andy Shevchenko
2026-07-09  8:34     ` Marcus Folkesson
2026-07-08 12:16 ` [PATCH v10 5/7] i2c: davinci: add support for setting bus frequency Marcus Folkesson
2026-07-08 12:16 ` [PATCH v10 6/7] i2c: mux: ltc4306: set correct idle_state in i2c_mux_core Marcus Folkesson
2026-07-08 12:16 ` [PATCH v10 7/7] docs: i2c: i2c-topology: add section about bus speed Marcus Folkesson
2026-07-08 19:37 ` [PATCH v10 0/7] I2C Mux per channel " Andy Shevchenko
2026-07-09  8:33   ` Marcus Folkesson
2026-07-09 10:05     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260708-i2c-mux-v10-2-09dca03c8a15@gmail.com \
    --to=marcus.folkesson@gmail.com \
    --cc=andi.shyti@kernel.org \
    --cc=andriy.shevchenko@intel.com \
    --cc=brgl@bgdev.pl \
    --cc=brgl@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=peda@lysator.liu.se \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox