From: Jiaxing Hu <huhuvmb88@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>, Joerg Roedel <joro@8bytes.org>,
Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>,
iommu@lists.linux.dev, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] iommu/rockchip: implement .flush_iotlb_all
Date: Fri, 10 Jul 2026 18:05:13 +1200 [thread overview]
Message-ID: <20260710060513.863714-1-huhuvmb88@gmail.com> (raw)
rk_iommu invalidates the IOTLB synchronously in .unmap (via
rk_iommu_zap_iova), so it stays consistent without a deferred .iotlb_sync
and does not advertise IOMMU_CAP_DEFERRED_FLUSH.
It never implemented the optional .flush_iotlb_all op, though, and
iommu_flush_iotlb_all() is a no-op when that op is absent -- so on Rockchip
a driver that owns an rk_iommu domain and calls it to flush the whole
domain's TLB (e.g. before reusing a mapping, without unmapping it) gets
nothing, even though the hardware can do it: rk_iommu already issues
ZAP_CACHE for range shootdowns.
Implement it with that same primitive: ZAP_CACHE every bank of every IOMMU
on the domain, under the runtime-PM + clk guard already used by
rk_iommu_zap_iova().
Found while bringing up an out-of-tree RK3576 NPU (accel/rocket) driver
that flushes before each submit; on Rockchip that flush did nothing.
Signed-off-by: Jiaxing Hu <huhuvmb88@gmail.com>
---
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -1202,6 +1202,30 @@
return 0;
}
+/* shootdown the entire tlb on all iommus using this domain */
+static void rk_iommu_flush_iotlb_all(struct iommu_domain *domain)
+{
+ struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
+ struct list_head *pos;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rk_domain->iommus_lock, flags);
+ list_for_each(pos, &rk_domain->iommus) {
+ struct rk_iommu *iommu = list_entry(pos, struct rk_iommu, node);
+ int ret = pm_runtime_get_if_in_use(iommu->dev);
+
+ if (WARN_ON_ONCE(ret < 0))
+ continue;
+ if (ret) {
+ WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks));
+ rk_iommu_command(iommu, RK_MMU_CMD_ZAP_CACHE);
+ clk_bulk_disable(iommu->num_clocks, iommu->clocks);
+ pm_runtime_put(iommu->dev);
+ }
+ }
+ spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
+}
+
static const struct iommu_ops rk_iommu_ops = {
.identity_domain = &rk_identity_domain,
.domain_alloc_paging = rk_iommu_domain_alloc_paging,
@@ -1214,6 +1245,7 @@
.map_pages = rk_iommu_map,
.unmap_pages = rk_iommu_unmap,
.iova_to_phys = rk_iommu_iova_to_phys,
+ .flush_iotlb_all = rk_iommu_flush_iotlb_all,
.free = rk_iommu_domain_free,
}
};
next reply other threads:[~2026-07-10 6:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-10 6:05 Jiaxing Hu [this message]
2026-07-10 10:59 ` [PATCH] iommu/rockchip: implement .flush_iotlb_all Will Deacon
2026-07-10 12:11 ` Robin Murphy
2026-07-10 11:15 ` Jiaxing Hu
2026-07-10 13:42 ` Heiko Stübner
2026-07-10 21:11 ` Jiaxing Hu
2026-07-10 21:23 ` Jiaxing Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260710060513.863714-1-huhuvmb88@gmail.com \
--to=huhuvmb88@gmail.com \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox