Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
To: <michal.simek@amd.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <ptsm@linux.microsoft.com>,
	<radhey.shyam.pandey@amd.com>,
	Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Subject: [PATCH v2 3/4] firmware: xilinx: Clear firmware notifiers across kexec transitions
Date: Fri, 24 Jul 2026 02:53:01 -0700	[thread overview]
Message-ID: <20260724095301.2890001-4-jay.buddhabhatti@amd.com> (raw)
In-Reply-To: <20260724095301.2890001-1-jay.buddhabhatti@amd.com>

During a kexec restart, only the kernel is reloaded but notifier callbacks
in firmware persist, causing state mismatches between kernel and firmware.

To address this, introduce PM_ALL_NOTIFIERS node ID to unregister all
notifier callbacks during kexec. On a graceful kexec restart, this occurs
in zynqmp_firmware_shutdown(). On a crash kernel restart, it happens in
zynqmp_firmware_probe() in the reloaded kernel.

Unregistering all notifiers depends on firmware support for the
PM_ALL_NOTIFIERS node ID. On firmware that does not implement it (the
feature check reports a version below PM_API_VERSION_3) the step is
skipped and a warning such as "Firmware doesn't support unregister all
notifiers at once" is logged, e.g. on Versal NET firmware that predates
this API.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
---
 drivers/firmware/xilinx/zynqmp.c     | 13 +++++++++++++
 include/linux/firmware/xlnx-zynqmp.h |  3 +++
 2 files changed, 16 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 0deb278b2c2d..4e57c0ab9fe1 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -2107,6 +2107,19 @@ static int zynqmp_clear_pm_state(struct device *dev)
 		} else {
 			dev_warn(dev,
 				 "Bulk device release is not supported by firmware: %d\n", ret);
+		}
+
+		/* Check if the firmware supports the PM_ALL_NOTIFIERS node ID */
+		ret = do_feature_check_call(PM_REGISTER_NOTIFIER);
+		if ((ret & FIRMWARE_VERSION_MASK) >= PM_API_VERSION_3) {
+			/* Attempt to unregister all notifier callbacks via firmware */
+			ret = zynqmp_pm_register_notifier(PM_ALL_NOTIFIERS, 0, 0, 0);
+			if (ret)
+				dev_err(dev, "Failed to unregister all notifiers: %d\n", ret);
+		} else {
+			dev_warn(dev,
+				 "Firmware doesn't support unregister all notifiers at once: %d\n",
+				 ret);
 			ret = 0;
 		}
 	}
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index ac39e5492961..69a2f74269f3 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -149,6 +149,9 @@
 /* Node ID for all peripheral devices */
 #define PM_DEV_ALL_PERIPH	0x18224FFFU
 
+/* Node ID for all notifier callbacks */
+#define PM_ALL_NOTIFIERS	0xFFFFFFFFU
+
 enum pm_module_id {
 	PM_MODULE_ID = 0x0,
 	XPM_MODULE_ID = 0x2,
-- 
2.34.1



  parent reply	other threads:[~2026-07-24  9:53 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-23 12:48 [PATCH 0/4] firmware: xilinx: Clean up firmware and TF-A state on kexec Jay Buddhabhatti
2026-07-23 12:48 ` [PATCH 1/4] firmware: xilinx: Add support to clear TF-A PM state Jay Buddhabhatti
2026-07-23 16:25   ` Pandey, Radhey Shyam
2026-07-24  6:17   ` Prasanna Kumar T S M
2026-07-23 12:48 ` [PATCH 2/4] firmware: xilinx: Release all peripheral devices from firmware Jay Buddhabhatti
2026-07-23 16:25   ` Pandey, Radhey Shyam
2026-07-24  6:17   ` Prasanna Kumar T S M
2026-07-23 12:48 ` [PATCH 3/4] firmware: xilinx: Clear firmware notifiers across kexec transitions Jay Buddhabhatti
2026-07-23 16:27   ` Pandey, Radhey Shyam
2026-07-24  6:18   ` Prasanna Kumar T S M
2026-07-23 12:48 ` [PATCH 4/4] firmware: xilinx: Use TF-A feature check for TF-A specific APIs Jay Buddhabhatti
2026-07-23 16:28   ` Pandey, Radhey Shyam
2026-07-24  6:31   ` Prasanna Kumar T S M
2026-07-24  7:37     ` Buddhabhatti, Jay
2026-07-24  9:52 ` [PATCH v2 0/3] firmware: xilinx: Clean up firmware and TF-A state on kexec Jay Buddhabhatti
2026-07-24  9:52   ` [PATCH v2 1/4] firmware: xilinx: Add support to clear TF-A PM state Jay Buddhabhatti
2026-07-24  9:53   ` [PATCH v2 2/4] firmware: xilinx: Release all peripheral devices from firmware Jay Buddhabhatti
2026-07-24  9:53   ` Jay Buddhabhatti [this message]
2026-07-24 10:19   ` [PATCH v3 0/3] firmware: xilinx: Clean up firmware and TF-A state on kexec Jay Buddhabhatti
2026-07-24 10:19     ` [PATCH v3 1/3] firmware: xilinx: Add support to clear TF-A PM state Jay Buddhabhatti
2026-07-24 11:13       ` Sudeep Holla
2026-07-24 10:19     ` [PATCH v3 2/3] firmware: xilinx: Release all peripheral devices from firmware Jay Buddhabhatti
2026-07-24 10:19     ` [PATCH v3 3/3] firmware: xilinx: Clear firmware notifiers across kexec transitions Jay Buddhabhatti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260724095301.2890001-4-jay.buddhabhatti@amd.com \
    --to=jay.buddhabhatti@amd.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=ptsm@linux.microsoft.com \
    --cc=radhey.shyam.pandey@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox