From: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
To: <michal.simek@amd.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <ptsm@linux.microsoft.com>,
<radhey.shyam.pandey@amd.com>,
Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Subject: [PATCH v3 3/3] firmware: xilinx: Clear firmware notifiers across kexec transitions
Date: Fri, 24 Jul 2026 03:19:48 -0700 [thread overview]
Message-ID: <20260724101948.2895263-4-jay.buddhabhatti@amd.com> (raw)
In-Reply-To: <20260724101948.2895263-1-jay.buddhabhatti@amd.com>
During a kexec restart, only the kernel is reloaded but notifier callbacks
in firmware persist, causing state mismatches between kernel and firmware.
To address this, introduce PM_ALL_NOTIFIERS node ID to unregister all
notifier callbacks during kexec. On a graceful kexec restart, this occurs
in zynqmp_firmware_shutdown(). On a crash kernel restart, it happens in
zynqmp_firmware_probe() in the reloaded kernel.
Unregistering all notifiers depends on firmware support for the
PM_ALL_NOTIFIERS node ID. On firmware that does not implement it (the
feature check reports a version below PM_API_VERSION_3) the step is
skipped and a warning such as "Firmware doesn't support unregister all
notifiers at once" is logged, e.g. on Versal NET firmware that predates
this API.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
---
drivers/firmware/xilinx/zynqmp.c | 14 ++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 3 +++
2 files changed, 17 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 64d2109eefd2..fc7212f554ee 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -2110,6 +2110,20 @@ static int zynqmp_clear_pm_state(struct device *dev)
"Bulk device release is not supported by firmware: %d\n", ret);
ret = 0;
}
+
+ /* Check if the firmware supports the PM_ALL_NOTIFIERS node ID */
+ ret = do_feature_check_call(PM_REGISTER_NOTIFIER);
+ if (ret >= 0 && ((ret & FIRMWARE_VERSION_MASK) >= PM_API_VERSION_3)) {
+ /* Attempt to unregister all notifier callbacks via firmware */
+ ret = zynqmp_pm_register_notifier(PM_ALL_NOTIFIERS, 0, 0, 0);
+ if (ret)
+ dev_err(dev, "Failed to unregister all notifiers: %d\n", ret);
+ } else {
+ dev_warn(dev,
+ "Firmware doesn't support unregister all notifiers at once: %d\n",
+ ret);
+ ret = 0;
+ }
}
return ret;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index ac39e5492961..69a2f74269f3 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -149,6 +149,9 @@
/* Node ID for all peripheral devices */
#define PM_DEV_ALL_PERIPH 0x18224FFFU
+/* Node ID for all notifier callbacks */
+#define PM_ALL_NOTIFIERS 0xFFFFFFFFU
+
enum pm_module_id {
PM_MODULE_ID = 0x0,
XPM_MODULE_ID = 0x2,
--
2.34.1
prev parent reply other threads:[~2026-07-24 10:21 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 12:48 [PATCH 0/4] firmware: xilinx: Clean up firmware and TF-A state on kexec Jay Buddhabhatti
2026-07-23 12:48 ` [PATCH 1/4] firmware: xilinx: Add support to clear TF-A PM state Jay Buddhabhatti
2026-07-23 16:25 ` Pandey, Radhey Shyam
2026-07-24 6:17 ` Prasanna Kumar T S M
2026-07-23 12:48 ` [PATCH 2/4] firmware: xilinx: Release all peripheral devices from firmware Jay Buddhabhatti
2026-07-23 16:25 ` Pandey, Radhey Shyam
2026-07-24 6:17 ` Prasanna Kumar T S M
2026-07-23 12:48 ` [PATCH 3/4] firmware: xilinx: Clear firmware notifiers across kexec transitions Jay Buddhabhatti
2026-07-23 16:27 ` Pandey, Radhey Shyam
2026-07-24 6:18 ` Prasanna Kumar T S M
2026-07-23 12:48 ` [PATCH 4/4] firmware: xilinx: Use TF-A feature check for TF-A specific APIs Jay Buddhabhatti
2026-07-23 16:28 ` Pandey, Radhey Shyam
2026-07-24 6:31 ` Prasanna Kumar T S M
2026-07-24 7:37 ` Buddhabhatti, Jay
2026-07-24 9:52 ` [PATCH v2 0/3] firmware: xilinx: Clean up firmware and TF-A state on kexec Jay Buddhabhatti
2026-07-24 9:52 ` [PATCH v2 1/4] firmware: xilinx: Add support to clear TF-A PM state Jay Buddhabhatti
2026-07-24 9:53 ` [PATCH v2 2/4] firmware: xilinx: Release all peripheral devices from firmware Jay Buddhabhatti
2026-07-24 9:53 ` [PATCH v2 3/4] firmware: xilinx: Clear firmware notifiers across kexec transitions Jay Buddhabhatti
2026-07-24 10:19 ` [PATCH v3 0/3] firmware: xilinx: Clean up firmware and TF-A state on kexec Jay Buddhabhatti
2026-07-24 10:19 ` [PATCH v3 1/3] firmware: xilinx: Add support to clear TF-A PM state Jay Buddhabhatti
2026-07-24 11:13 ` Sudeep Holla
2026-07-24 10:19 ` [PATCH v3 2/3] firmware: xilinx: Release all peripheral devices from firmware Jay Buddhabhatti
2026-07-24 10:19 ` Jay Buddhabhatti [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260724101948.2895263-4-jay.buddhabhatti@amd.com \
--to=jay.buddhabhatti@amd.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
--cc=ptsm@linux.microsoft.com \
--cc=radhey.shyam.pandey@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox