Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Coia Prant <coiaprant@gmail.com>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>, Vinod Koul <vkoul@kernel.org>,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	Romain Gantois <romain.gantois@bootlin.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Coia Prant <coiaprant@gmail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	Russell King <linux@armlinux.org.uk>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	David Heidelberg <david@ixit.cz>,
	netdev@vger.kernel.org, linux-rockchip@lists.infradead.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 05/10] arm64: dts: rockchip: rk3568: add XPCS and fixed-clock nodes
Date: Sat,  1 Aug 2026 22:22:29 +0800	[thread overview]
Message-ID: <20260801142244.679437-7-coiaprant@gmail.com> (raw)
In-Reply-To: <20260801142244.679437-2-coiaprant@gmail.com>

The RK3568 SoC integrates a Synopsys DesignWare XPCS that provides
the Physical Coding Sublayer for 1000BASE-X, SGMII, and QSGMII
interfaces via its four MII ports.  Add the XPCS device node and
its pcs-mii sub-nodes to the SoC device tree.

The XPCS device is accessed via the APB3 bus at 0xfda00000 and
requires the CSR clock (PCLK_XPCS) for register access and the EEE
clock (CLK_XPCS_EEE) for Energy Efficient Ethernet operation.  The
PD_PIPE power domain must be enabled before any register access.

Also add two fixed-clock nodes (xpcs_gmac0_clk and xpcs_gmac1_clk)
providing the 125 MHz reference clock for the GMACs when operating
with XPCS.  These clocks are used as the assigned-clock-parents
for the respective GMAC nodes in board-level device trees.

The XPCS node and its pcs-mii sub-nodes are disabled by default and
must be enabled at the board level when 1000BASE-X/SGMII/QSGMII is
in use.  The fixed-clock nodes are always present and do not have a
status property, as they are static clock sources.

The XPCS node also requires a reference to the appropriate Naneng
Combo PHY via the phys property at the board level.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi | 45 ++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 3bc653f027f1f..989e164c0eb39 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -110,6 +110,51 @@ sata0: sata@fc000000 {
 		status = "disabled";
 	};
 
+	xpcs: pcs@fda00000 {
+		compatible = "rockchip,rk3568-xpcs";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x0 0xfda00000 0x0 0x200000>;
+		clocks = <&cru PCLK_XPCS>, <&cru CLK_XPCS_EEE>;
+		clock-names = "csr", "eee";
+		power-domains = <&power RK3568_PD_PIPE>;
+		status = "disabled";
+
+		xpcs_mii0: pcs-mii@0 {
+			reg = <0>;
+			status = "disabled";
+		};
+
+		xpcs_mii1: pcs-mii@1 {
+			reg = <1>;
+			status = "disabled";
+		};
+
+		xpcs_mii2: pcs-mii@2 {
+			reg = <2>;
+			status = "disabled";
+		};
+
+		xpcs_mii3: pcs-mii@3 {
+			reg = <3>;
+			status = "disabled";
+		};
+	};
+
+	xpcs_gmac0_clk: xpcs-gmac0-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_gmac0_xpcs_mii";
+		#clock-cells = <0>;
+	};
+
+	xpcs_gmac1_clk: xpcs-gmac1-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clk_gmac1_xpcs_mii";
+		#clock-cells = <0>;
+	};
+
 	pipe_phy_grf0: syscon@fdc70000 {
 		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
 		reg = <0x0 0xfdc70000 0x0 0x1000>;
-- 
2.47.3



  parent reply	other threads:[~2026-08-01 14:24 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-01 14:22 [PATCH v2 00/10] net-next: add basic support for RK3568 XPCS Coia Prant
2026-08-01 14:22 ` [PATCH v2 01/10] net: stmmac: move XPCS lifetime management to platform drivers Coia Prant
2026-08-01 14:22 ` [PATCH v2 02/10] dt-bindings: phy: rockchip: naneng-combphy: add rockchip,sgmii-mac-sel property Coia Prant
2026-08-01 14:22 ` [PATCH v2 03/10] phy: rockchip: naneng-combphy: add SGMII MAC selection for RK3568 Coia Prant
2026-08-01 14:22 ` [PATCH v2 04/10] dt-bindings: net: pcs: add rockchip,rk3568-xpcs binding Coia Prant
2026-08-01 14:22 ` Coia Prant [this message]
2026-08-01 16:28   ` [PATCH v2 05/10] arm64: dts: rockchip: rk3568: add XPCS and fixed-clock nodes Heiko Stübner
2026-08-01 14:22 ` [PATCH v2 06/10] net: pcs: xpcs: add ANRESTART support for SGMII link recovery Coia Prant
2026-08-01 14:22 ` [PATCH v2 07/10] net: pcs: xpcs: add Rockchip RK3568 platform glue driver Coia Prant
2026-08-01 14:22 ` [PATCH v2 08/10] net: stmmac: dwmac-rk: add SGMII support for RK3568 Coia Prant
2026-08-01 14:22 ` [PATCH v2 09/10] arm64: dts: rockchip: rk3568-photonicat: enable SGMII LAN port Coia Prant
2026-08-01 14:22 ` [PATCH v2 10/10] MAINTAINERS: add entry for Rockchip XPCS driver Coia Prant

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260801142244.679437-7-coiaprant@gmail.com \
    --to=coiaprant@gmail.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=david@ixit.cz \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=heiko@sntech.de \
    --cc=hkallweit1@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux@armlinux.org.uk \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh@kernel.org \
    --cc=romain.gantois@bootlin.com \
    --cc=shawn.lin@rock-chips.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox