[PATCH v1] PCI: xgene: Use managed clock for PCIe controller

[PATCH v1] PCI: xgene: Use managed clock for PCIe controller

[Yuho Choi]

xgene_pcie_init_port() obtains and enables the controller clock manually.
When xgene_pcie_setup() or pci_host_probe() fails, probe returns without
disabling, unpreparing, or releasing the clock. A failed enable also leaves
the clk_get() reference unreleased.

Use devm_clk_get_enabled() so the clock is unwound automatically on probe
failure and device removal.

Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
---
 drivers/pci/controller/pci-xgene.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
index b95afa35201d..4fe3581b9372 100644
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -321,18 +321,11 @@ static void xgene_pcie_linkup(struct xgene_pcie *port,
 static int xgene_pcie_init_port(struct xgene_pcie *port)
 {
 	struct device *dev = port->dev;
-	int rc;
 
-	port->clk = clk_get(dev, NULL);
+	port->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(port->clk)) {
 		dev_err(dev, "clock not available\n");
-		return -ENODEV;
-	}
-
-	rc = clk_prepare_enable(port->clk);
-	if (rc) {
-		dev_err(dev, "clock enable failed\n");
-		return rc;
+		return PTR_ERR(port->clk);
 	}
 
 	return 0;
-- 
2.43.0