From: Chi-Wen Weng <cwweng.linux@gmail.com>
To: broonie@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
cwweng@nuvoton.com, cwweng.linux@gmail.com
Subject: [PATCH v3 2/2] spi: ma35d1-qspi: Enable GPIO chip selects
Date: Mon, 3 Aug 2026 15:49:13 +0800 [thread overview]
Message-ID: <20260803074913.1656675-3-cwweng.linux@gmail.com> (raw)
In-Reply-To: <20260803074913.1656675-1-cwweng.linux@gmail.com>
From: Chi-Wen Weng <cwweng@nuvoton.com>
The generic SPI controller binding allows GPIO-based chip selects, but
the MA35D1 QSPI driver does not currently enable the SPI core's GPIO
descriptor handling.
Enable GPIO chip-select support and distinguish the total number of chip
selects from the controller's two native chip selects. Allow num-cs to
include additional GPIO chip selects and set max_native_cs to the native
hardware limit.
Add a setup callback that rejects chip-select indices beyond the native
limit when no GPIO descriptor is present. Also reject active-high
polarity only for native chip selects, while allowing GPIO chip-select
polarity to be handled by the GPIO subsystem.
Signed-off-by: Chi-Wen Weng <cwweng@nuvoton.com>
---
drivers/spi/spi-ma35d1-qspi.c | 32 ++++++++++++++++++++++++++++----
1 file changed, 28 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-ma35d1-qspi.c b/drivers/spi/spi-ma35d1-qspi.c
index 541d5d72484c..f893a4160528 100644
--- a/drivers/spi/spi-ma35d1-qspi.c
+++ b/drivers/spi/spi-ma35d1-qspi.c
@@ -61,7 +61,7 @@
#define NUVOTON_QSPI_STATUS_RXEMPTY_MASK BIT(8) /* Receive FIFO Empty */
#define NUVOTON_QSPI_STATUS_BUSY_MASK BIT(0) /* Busy Status */
-#define NUVOTON_QSPI_MAX_NUM_CS 2
+#define NUVOTON_QSPI_MAX_NATIVE_CS 2
#define NUVOTON_QSPI_DEFAULT_NUM_CS 2
#define NUVOTON_QSPI_DEFAULT_BPW 8
/* Bound PIO operations to avoid long atomic polling loops. */
@@ -430,13 +430,34 @@ static void nuvoton_qspi_set_cs_level(struct nuvoton_qspi *qspi,
spin_unlock_irqrestore(&qspi->ssctl_lock, flags);
}
+static int nuvoton_qspi_setup(struct spi_device *spi)
+{
+ unsigned int cs = spi_get_chipselect(spi, 0);
+
+ if (spi_get_csgpiod(spi, 0))
+ return 0;
+
+ if (cs >= NUVOTON_QSPI_MAX_NATIVE_CS) {
+ dev_err(&spi->dev, "invalid native chip select %u\n", cs);
+ return -EINVAL;
+ }
+
+ if (spi->mode & SPI_CS_HIGH) {
+ dev_err(&spi->dev,
+ "active-high native chip select is not supported\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static void nuvoton_qspi_set_cs(struct spi_device *spi, bool level)
{
struct nuvoton_qspi *qspi = spi_controller_get_devdata(spi->controller);
/*
- * The SPI core passes the physical CS level to ->set_cs(). This
- * initial driver only supports active-low native chip selects.
+ * The SPI core passes the physical CS level to ->set_cs(). Native
+ * chip selects are active low.
*/
nuvoton_qspi_set_cs_level(qspi, spi_get_chipselect(spi, 0), !level);
}
@@ -608,15 +629,18 @@ static int nuvoton_qspi_probe(struct platform_device *pdev)
if (ret && ret != -EINVAL)
return dev_err_probe(dev, ret, "failed to read num-cs\n");
- if (!num_cs || num_cs > NUVOTON_QSPI_MAX_NUM_CS)
+ if (!num_cs)
return dev_err_probe(dev, -EINVAL, "invalid num-cs %u\n",
num_cs);
ctlr->num_chipselect = num_cs;
+ ctlr->max_native_cs = NUVOTON_QSPI_MAX_NATIVE_CS;
+ ctlr->use_gpio_descriptors = true;
ctlr->max_transfer_size = nuvoton_qspi_max_transfer_size;
ctlr->max_message_size = nuvoton_qspi_max_message_size;
ctlr->mem_ops = &nuvoton_qspi_mem_ops;
ctlr->mem_caps = &nuvoton_qspi_mem_caps;
+ ctlr->setup = nuvoton_qspi_setup;
ctlr->set_cs = nuvoton_qspi_set_cs;
ctlr->transfer_one = nuvoton_qspi_transfer_one;
ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
--
2.25.1
next prev parent reply other threads:[~2026-08-03 7:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-31 2:38 [PATCH v5 0/2] spi: ma35d1-qspi: Add Nuvoton MA35D1 QSPI controller Chi-Wen Weng
2026-07-31 2:38 ` [PATCH v5 1/2] dt-bindings: spi: nuvoton,ma35d1-qspi: Add Nuvoton MA35D1 QSPI Chi-Wen Weng
2026-07-31 20:28 ` Mark Brown
2026-08-03 2:06 ` Chi-Wen Weng
2026-08-03 6:24 ` [PATCH v2] spi: ma35d1-qspi: Enable GPIO chip selects Chi-Wen Weng
2026-08-03 7:49 ` [PATCH v3 0/2] spi: ma35d1-qspi: Enable GPIO chip-select support Chi-Wen Weng
2026-08-03 7:49 ` [PATCH v3 1/2] dt-bindings: spi: nuvoton,ma35d1-qspi: Allow additional GPIO chip selects Chi-Wen Weng
2026-08-04 7:05 ` Krzysztof Kozlowski
2026-08-04 7:33 ` Chi-Wen Weng
2026-08-03 7:49 ` Chi-Wen Weng [this message]
2026-08-03 12:30 ` [PATCH v3 0/2] spi: ma35d1-qspi: Enable GPIO chip-select support Mark Brown
2026-08-04 1:57 ` Chi-Wen Weng
2026-07-31 2:38 ` [PATCH v5 2/2] spi: ma35d1-qspi: Add Nuvoton MA35D1 QSPI controller support Chi-Wen Weng
2026-07-31 20:29 ` [PATCH v5 0/2] spi: ma35d1-qspi: Add Nuvoton MA35D1 QSPI controller Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260803074913.1656675-3-cwweng.linux@gmail.com \
--to=cwweng.linux@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cwweng@nuvoton.com \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox