Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Long Zhao <longzhao@ambarella.com>
Cc: Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	 Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	 Linus Walleij <linusw@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Jiri Slaby <jirislaby@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	 Will Deacon <will@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	 Alexandre Belloni <alexandre.belloni@bootlin.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org,  linux-serial@vger.kernel.org,
	soc@lists.linux.dev
Subject: Re: [PATCH v2 03/10] dt-bindings: clock: add Ambarella CV75 RCT clock controller
Date: Fri, 7 Aug 2026 08:02:48 +0200	[thread overview]
Message-ID: <20260807-horned-blazing-whippet-c3eb73@quoll> (raw)
In-Reply-To: <20260806-longzhao-upstream-cv75-v2-v2-3-6b09707c5fe9@ambarella.com>

On Thu, Aug 06, 2026 at 05:34:11PM +0800, Long Zhao wrote:
> Add the CV75 RCT clock controller binding and clock ID header.
> 
> Signed-off-by: Long Zhao <longzhao@ambarella.com>
> ---
>  .../bindings/clock/ambarella,cv75-rct.yaml         | 66 ++++++++++++++++++++++
>  include/dt-bindings/clock/ambarella,cv75-clock.h   | 17 ++++++
>  2 files changed, 83 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml b/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
> new file mode 100644
> index 000000000000..aa96533bab9b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ambarella,cv75-rct.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/ambarella,cv75-rct.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ambarella CV75 RCT Clock Controller
> +
> +maintainers:
> +  - Long Zhao <longzhao@ambarella.com>
> +
> +description: |
> +  The RCT (Reset and Clock Tree) block on the Ambarella CV75 SoC provides
> +  PLLs, clock muxes and dividers for on-chip peripherals.
> +
> +  The same register region is also exposed as a syscon for other SoC
> +  blocks (e.g. pin drive-strength), hence the "syscon" compatible.
> +
> +  Clock indices are defined in
> +  include/dt-bindings/clock/ambarella,cv75-clock.h:
> +
> +  - CV75_GCLK_UART0: UART0 mux/div clock
> +  - CV75_GCLK_CORE: Core PLL (gclk_core)
> +  - CV75_GCLK_AHB: AHB bus clock (core / 2)
> +  - CV75_GCLK_APB: APB bus clock (core / 4)
> +
> +properties:
> +  $nodename:
> +    pattern: "^clock-controller@"

Drop nodename.

> +
> +  compatible:
> +    items:
> +      - const: ambarella,cv75-rct
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: Reference crystal oscillator (typically 24 MHz)
> +    maxItems: 1
> +
> +  clock-names:
> +    const: osc
> +
> +  "#clock-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - "#clock-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clock-controller@ed080000 {
> +        compatible = "ambarella,cv75-rct", "syscon";
> +        reg = <0xed080000 0x1000>;
> +        clocks = <&osc>;
> +        clock-names = "osc";
> +        #clock-cells = <1>;
> +    };
> diff --git a/include/dt-bindings/clock/ambarella,cv75-clock.h b/include/dt-bindings/clock/ambarella,cv75-clock.h
> new file mode 100644
> index 000000000000..3d3314446e75
> --- /dev/null
> +++ b/include/dt-bindings/clock/ambarella,cv75-clock.h

Filenames must be the same.

> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2026 Ambarella, Inc.
> + */
> +
> +#ifndef _DT_BINDINGS_CLOCK_AMBARELLA_CV75_CLOCK_H
> +#define _DT_BINDINGS_CLOCK_AMBARELLA_CV75_CLOCK_H
> +
> +/* Boot / bus clocks */
> +#define CV75_GCLK_UART0		0
> +#define CV75_GCLK_CORE		1
> +#define CV75_GCLK_AHB		2
> +#define CV75_GCLK_APB		3
> +
> +#define CV75_CLK_NUM		4

Drop, not a binding.

> +
> +#endif
> 
> -- 
> 2.34.1
> 


  parent reply	other threads:[~2026-08-07  6:03 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-06  9:34 [PATCH v2 00/10] Ambarella CV75 SoC minimal bring-up Long Zhao via B4 Relay
2026-08-06  9:34 ` [PATCH v2 01/10] dt-bindings: arm: add Ambarella CV75 platforms Long Zhao via B4 Relay
2026-08-07  6:00   ` Krzysztof Kozlowski
2026-08-06  9:34 ` [PATCH v2 02/10] dt-bindings: soc: add Ambarella secure scratchpad Long Zhao via B4 Relay
2026-08-07  6:01   ` Krzysztof Kozlowski
2026-08-07  8:29     ` Long Zhao
2026-08-06  9:34 ` [PATCH v2 03/10] dt-bindings: clock: add Ambarella CV75 RCT clock controller Long Zhao via B4 Relay
2026-08-06 10:56   ` Rob Herring (Arm)
2026-08-07  6:02   ` Krzysztof Kozlowski [this message]
2026-08-06  9:34 ` [PATCH v2 04/10] dt-bindings: pinctrl: add Ambarella CV75 pinctrl Long Zhao via B4 Relay
2026-08-07  6:06   ` Krzysztof Kozlowski
2026-08-06  9:34 ` [PATCH v2 05/10] dt-bindings: serial: add Ambarella UART Long Zhao via B4 Relay
2026-08-06  9:34 ` [PATCH v2 06/10] clk: ambarella: add CV75 CCU driver Long Zhao via B4 Relay
2026-08-06  9:34 ` [PATCH v2 07/10] pinctrl: ambarella: add Ambarella pin controller Long Zhao via B4 Relay
2026-08-07 17:45   ` Linus Walleij
2026-08-06  9:34 ` [PATCH v2 08/10] serial: ambarella: add Ambarella UART driver Long Zhao via B4 Relay
2026-08-07  6:18   ` Jiri Slaby
2026-08-07 18:37   ` Linus Walleij
2026-08-06  9:34 ` [PATCH v2 09/10] arm64: ambarella: add ARCH_AMBARELLA and CV75 EVK DT Long Zhao via B4 Relay
2026-08-07  6:11   ` Krzysztof Kozlowski
2026-08-06  9:34 ` [PATCH v2 10/10] MAINTAINERS: add ARM/AMBARELLA SoC support Long Zhao via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260807-horned-blazing-whippet-c3eb73@quoll \
    --to=krzk@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=longzhao@ambarella.com \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=soc@lists.linux.dev \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox