From: Sascha Bischoff <Sascha.Bischoff@arm.com>
To: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"kvmarm@lists.linux.dev" <kvmarm@lists.linux.dev>,
"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Cc: nd <nd@arm.com>, "maz@kernel.org" <maz@kernel.org>,
"oliver.upton@linux.dev" <oliver.upton@linux.dev>,
Joey Gouly <Joey.Gouly@arm.com>,
Suzuki Poulose <Suzuki.Poulose@arm.com>,
"yuzenghui@huawei.com" <yuzenghui@huawei.com>,
"peter.maydell@linaro.org" <peter.maydell@linaro.org>,
"lpieralisi@kernel.org" <lpieralisi@kernel.org>,
Timothy Hayes <Timothy.Hayes@arm.com>,
"fuad.tabba@linux.dev" <fuad.tabba@linux.dev>
Subject: [PATCH v5 15/49] KVM: arm64: gic-v5: Add resident/non-resident hyp calls
Date: Fri, 7 Aug 2026 11:20:14 +0000 [thread overview]
Message-ID: <20260807111159.429128-16-sascha.bischoff@arm.com> (raw)
In-Reply-To: <20260807111159.429128-1-sascha.bischoff@arm.com>
GICv5 introduces the concept of VPE residency - a VPE can be either
resident or non-resident. When the VPE is resident, the IRS is allowed
to select interrupts that target that VPE (or the VM) as the HPPI
(Highest Priority Pending Interrupt). As the IRS handles both SPIs and
LPIs, these will only be picked as the IRS's HPPI when a VPE is
resident.
A GICv5 VPE is made resident by writing ICH_CONTEXTR_EL2 with
ICH_CONTEXTR_EL2.V set, together with valid VM and VPE IDs. This
informs the IRS that a specific VPE is running, and that it can begin
HPPI selection for that VPE. Making a VPE non-resident (by making the
ICH_CONTEXTR_EL2 invalid) informs the IRS that the VPE is no longer
running, and it stops HPPI selection for it.
This change introduces two new hyp calls - one to make a VPE resident
and its counterpart to make a VPE non-resident. As part of making a
VPE resident, the resulting ICH_CONTEXTR_EL2.F bit is checked to catch
residency faults. Such a fault indicates a broken VM/VPE setup, so
warn and mark the VM dead.
Both of these new hypercalls are explicitly no-ops with pKVM as we
currently don't support the combination of GICv5 and pKVM.
Furthermore, this change extends vgic_v5_load() and vgic_v5_put() to
make the VPEs resident and non-resident, respectively. Hence, the VPE
is considered resident for the entire load-to-put interval.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
---
arch/arm64/include/asm/kvm_asm.h | 2 ++
arch/arm64/include/asm/kvm_hyp.h | 2 ++
arch/arm64/kvm/hyp/nvhe/hyp-main.c | 22 ++++++++++++++++++++++
arch/arm64/kvm/hyp/vgic-v5-sr.c | 26 ++++++++++++++++++++++++++
arch/arm64/kvm/vgic/vgic-v5.c | 16 ++++++++++++++--
include/kvm/arm_vgic.h | 3 +++
6 files changed, 69 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 043495f7fc78b..d9ff9c2999aa7 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -87,6 +87,8 @@ enum __kvm_host_smccc_func {
__KVM_HOST_SMCCC_FUNC___tracing_write_event,
__KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs,
__KVM_HOST_SMCCC_FUNC___vgic_v3_restore_vmcr_aprs,
+ __KVM_HOST_SMCCC_FUNC___vgic_v5_make_resident,
+ __KVM_HOST_SMCCC_FUNC___vgic_v5_make_non_resident,
__KVM_HOST_SMCCC_FUNC___vgic_v5_save_apr,
__KVM_HOST_SMCCC_FUNC___vgic_v5_restore_vmcr_apr,
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index 4974492744cc8..8fcbbff719cce 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -88,6 +88,8 @@ void __vgic_v3_restore_vmcr_aprs(struct vgic_v3_cpu_if *cpu_if);
int __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu);
/* GICv5 */
+void __vgic_v5_make_resident(struct vgic_v5_cpu_if *cpu_if);
+void __vgic_v5_make_non_resident(struct vgic_v5_cpu_if *cpu_if);
void __vgic_v5_save_apr(struct vgic_v5_cpu_if *cpu_if);
void __vgic_v5_restore_vmcr_apr(struct vgic_v5_cpu_if *cpu_if);
/* No hypercalls for the following */
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
index d3df96ed8ba42..7fdcc6bb6f594 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -691,6 +691,26 @@ static void handle___tracing_write_event(struct kvm_cpu_context *host_ctxt)
trace_selftest(id);
}
+static void handle___vgic_v5_make_resident(struct kvm_cpu_context *host_ctxt)
+{
+ DECLARE_REG(struct vgic_v5_cpu_if *, cpu_if, host_ctxt, 1);
+
+ if (unlikely(is_protected_kvm_enabled()))
+ return;
+
+ __vgic_v5_make_resident(kern_hyp_va(cpu_if));
+}
+
+static void handle___vgic_v5_make_non_resident(struct kvm_cpu_context *host_ctxt)
+{
+ DECLARE_REG(struct vgic_v5_cpu_if *, cpu_if, host_ctxt, 1);
+
+ if (unlikely(is_protected_kvm_enabled()))
+ return;
+
+ __vgic_v5_make_non_resident(kern_hyp_va(cpu_if));
+}
+
static void handle___vgic_v5_save_apr(struct kvm_cpu_context *host_ctxt)
{
DECLARE_REG(struct vgic_v5_cpu_if *, cpu_if, host_ctxt, 1);
@@ -738,6 +758,8 @@ static const hcall_t host_hcall[] = {
HANDLE_FUNC(__tracing_write_event),
HANDLE_FUNC(__vgic_v3_save_aprs),
HANDLE_FUNC(__vgic_v3_restore_vmcr_aprs),
+ HANDLE_FUNC(__vgic_v5_make_resident),
+ HANDLE_FUNC(__vgic_v5_make_non_resident),
HANDLE_FUNC(__vgic_v5_save_apr),
HANDLE_FUNC(__vgic_v5_restore_vmcr_apr),
diff --git a/arch/arm64/kvm/hyp/vgic-v5-sr.c b/arch/arm64/kvm/hyp/vgic-v5-sr.c
index 6d69dfe89a96c..f064045a31aee 100644
--- a/arch/arm64/kvm/hyp/vgic-v5-sr.c
+++ b/arch/arm64/kvm/hyp/vgic-v5-sr.c
@@ -7,6 +7,32 @@
#include <asm/kvm_hyp.h>
+void __vgic_v5_make_resident(struct vgic_v5_cpu_if *cpu_if)
+{
+ write_sysreg_s(cpu_if->vgic_contextr, SYS_ICH_CONTEXTR_EL2);
+ isb();
+
+ /* Catch any faults */
+ cpu_if->vgic_contextr = read_sysreg_s(SYS_ICH_CONTEXTR_EL2);
+ if (!!FIELD_GET(ICH_CONTEXTR_EL2_F, cpu_if->vgic_contextr))
+ return;
+
+ cpu_if->gicv5_vpe.resident = true;
+}
+
+void __vgic_v5_make_non_resident(struct vgic_v5_cpu_if *cpu_if)
+{
+ /*
+ * Make as non-resident before actually making non-resident. Avoids race
+ * with doorbell arriving.
+ */
+ cpu_if->gicv5_vpe.resident = false;
+ dsb(st);
+
+ write_sysreg_s(cpu_if->vgic_contextr, SYS_ICH_CONTEXTR_EL2);
+ isb();
+}
+
void __vgic_v5_save_apr(struct vgic_v5_cpu_if *cpu_if)
{
cpu_if->vgic_apr = read_sysreg_s(SYS_ICH_APR_EL2);
diff --git a/arch/arm64/kvm/vgic/vgic-v5.c b/arch/arm64/kvm/vgic/vgic-v5.c
index f15a8309d7a93..c36ae9e07ae26 100644
--- a/arch/arm64/kvm/vgic/vgic-v5.c
+++ b/arch/arm64/kvm/vgic/vgic-v5.c
@@ -1058,6 +1058,8 @@ void vgic_v5_flush_ppi_state(struct kvm_vcpu *vcpu)
void vgic_v5_load(struct kvm_vcpu *vcpu)
{
struct vgic_v5_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v5;
+ u16 vm = vgic_v5_vm_id(vcpu->kvm);
+ u16 vpe = vgic_v5_vpe_id(vcpu);
/*
* On the WFI path, vgic_load is called a second time. The first is when
@@ -1070,7 +1072,15 @@ void vgic_v5_load(struct kvm_vcpu *vcpu)
kvm_call_hyp(__vgic_v5_restore_vmcr_apr, cpu_if);
- cpu_if->gicv5_vpe.resident = true;
+ cpu_if->vgic_contextr = FIELD_PREP(ICH_CONTEXTR_EL2_V, true) |
+ FIELD_PREP(ICH_CONTEXTR_EL2_VPE, vpe) |
+ FIELD_PREP(ICH_CONTEXTR_EL2_VM, vm);
+
+ kvm_call_hyp(__vgic_v5_make_resident, cpu_if);
+
+ /* Failed to make the VPE resident? Bang! */
+ if (WARN_ON(!!FIELD_GET(ICH_CONTEXTR_EL2_F, cpu_if->vgic_contextr)))
+ kvm_vm_dead(vcpu->kvm);
}
void vgic_v5_put(struct kvm_vcpu *vcpu)
@@ -1088,7 +1098,9 @@ void vgic_v5_put(struct kvm_vcpu *vcpu)
kvm_call_hyp(__vgic_v5_save_apr, cpu_if);
- cpu_if->gicv5_vpe.resident = false;
+ cpu_if->vgic_contextr = 0;
+
+ kvm_call_hyp(__vgic_v5_make_non_resident, cpu_if);
/* The shadow priority is only updated on entering WFI */
if (vcpu_get_flag(vcpu, IN_WFI))
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index 7fece54ff0925..9d509cb90ab22 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -525,6 +525,9 @@ struct vgic_v5_cpu_if {
*/
u64 vgic_icsr;
+ /* The contextr used to make VPEs resident and non-resident */
+ u64 vgic_contextr;
+
struct gicv5_vpe gicv5_vpe;
};
--
2.34.1
next prev parent reply other threads:[~2026-08-07 11:21 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-07 11:12 [PATCH v5 00/49] KVM: arm64: Add GICv5 IRS support Sascha Bischoff
2026-08-07 11:13 ` [PATCH v5 01/49] irqchip/gic-v5: Allow KVM setup without a maintenance IRQ Sascha Bischoff
2026-08-07 11:13 ` [PATCH v5 02/49] irqchip/gic-v5: Provide OF IRS config frame attrs to KVM Sascha Bischoff
2026-08-07 11:14 ` [PATCH v5 03/49] irqchip/gic-v5: Set up gic_kvm_info on ACPI hosts Sascha Bischoff
2026-08-07 13:44 ` Lorenzo Pieralisi
2026-08-07 11:14 ` [PATCH v5 04/49] KVM: arm64: gic-v5: Define remaining IRS MMIO registers Sascha Bischoff
2026-08-07 11:15 ` [PATCH v5 05/49] arm64/sysreg: Add GICv5 GIC VDPEND encoding Sascha Bischoff
2026-08-07 11:15 ` [PATCH v5 06/49] arm64/sysreg: Update ICC_CR0_EL1 with LINK and LINK_IDLE fields Sascha Bischoff
2026-08-07 11:16 ` [PATCH v5 07/49] KVM: arm64: gic-v5: Cache host IRS ID registers Sascha Bischoff
2026-08-07 11:16 ` [PATCH v5 08/49] KVM: arm64: gic-v5: Add VPE doorbell domain Sascha Bischoff
2026-08-07 11:17 ` [PATCH v5 09/49] KVM: arm64: gic-v5: Create and manage VM and VPE tables Sascha Bischoff
2026-08-07 11:17 ` [PATCH v5 10/49] KVM: arm64: gic-v5: Introduce guest IST alloc and management Sascha Bischoff
2026-08-07 11:18 ` [PATCH v5 11/49] KVM: arm64: gic-v5: Implement VMT/vIST IRS MMIO Ops Sascha Bischoff
2026-08-07 11:18 ` [PATCH v5 12/49] KVM: arm64: gic-v5: Keep GICv5 vCPU limit model-specific Sascha Bischoff
2026-08-07 11:19 ` [PATCH v5 13/49] KVM: arm64: gic-v5: Implement VPE IRS MMIO Ops Sascha Bischoff
2026-08-07 11:19 ` [PATCH v5 14/49] KVM: arm64: gic-v5: Set up VMTEs and VPE doorbells Sascha Bischoff
2026-08-07 11:20 ` Sascha Bischoff [this message]
2026-08-07 11:20 ` [PATCH v5 16/49] KVM: arm64: gic-v5: Request doorbells when VPEs enter WFI Sascha Bischoff
2026-08-07 11:21 ` [PATCH v5 17/49] KVM: arm64: gic-v5: Introduce struct vgic_v5_irs and IRS base address Sascha Bischoff
2026-08-07 11:21 ` [PATCH v5 18/49] KVM: arm64: gic-v5: Add IRS IODEV support to MMIO handlers Sascha Bischoff
2026-08-07 11:22 ` [PATCH v5 19/49] KVM: arm64: gic-v5: Add KVM_VGIC_V5_ADDR_TYPE_IRS to UAPI Sascha Bischoff
2026-08-07 11:22 ` [PATCH v5 20/49] KVM: arm64: gic-v5: Add GICv5 IRS IODEV and MMIO emulation Sascha Bischoff
2026-08-07 11:23 ` [PATCH v5 21/49] KVM: arm64: gic-v5: Initialise per-VM IRS state Sascha Bischoff
2026-08-07 11:23 ` [PATCH v5 22/49] KVM: arm64: gic-v5: Register the IRS IODEV Sascha Bischoff
2026-08-07 11:24 ` [PATCH v5 23/49] KVM: arm64: gic-v5: Set IRICHPPIDIS based on IRS enable state Sascha Bischoff
2026-08-07 11:24 ` [PATCH v5 24/49] KVM: arm64: selftests: Update vGICv5 selftest to set IRS address Sascha Bischoff
2026-08-07 11:25 ` [PATCH v5 25/49] KVM: arm64: gic-v5: Add GIC VDPEND hyp call Sascha Bischoff
2026-08-07 11:25 ` [PATCH v5 26/49] KVM: arm64: gic: Introduce set_pending_state() to irq_ops Sascha Bischoff
2026-08-07 11:26 ` [PATCH v5 27/49] KVM: arm64: gic-v5: Support SPI injection Sascha Bischoff
2026-08-07 11:26 ` [PATCH v5 28/49] Documentation: KVM: Extend VGICv5 device attribute docs Sascha Bischoff
2026-08-07 11:27 ` [PATCH v5 29/49] KVM: arm64: gic-v5: Add GICv5 SPI injection to irqfd Sascha Bischoff
2026-08-07 11:27 ` [PATCH v5 30/49] KVM: arm64: gic-v5: Mask per-vCPU PPI state in vgic_v5_finalize_ppi_state() Sascha Bischoff
2026-08-07 11:28 ` [PATCH v5 31/49] KVM: arm64: gic-v5: Add GICv5 EL1 sysreg userspace accessors Sascha Bischoff
2026-08-07 11:28 ` [PATCH v5 32/49] KVM: arm64: gic-v5: Handle userspace accesses to IRS MMIO region Sascha Bischoff
2026-08-07 11:29 ` [PATCH v5 33/49] KVM: arm64: gic-v5: Add CoreSight MMIO regs to IRS Sascha Bischoff
2026-08-07 11:29 ` [PATCH v5 34/49] KVM: arm64: gic-v5: Add VGICv5 IST save/restore UAPI Sascha Bischoff
2026-08-07 11:30 ` [PATCH v5 35/49] KVM: arm64: gic-v5: Implement save/restore mechanisms for ISTs Sascha Bischoff
2026-08-07 11:30 ` [PATCH v5 36/49] Documentation: KVM: Document KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS for VGICv5 Sascha Bischoff
2026-08-07 11:31 ` [PATCH v5 37/49] Documentation: KVM: Add KVM_DEV_ARM_VGIC_GRP_IRS_REGS to VGICv5 docs Sascha Bischoff
2026-08-07 11:31 ` [PATCH v5 38/49] Documentation: KVM: Add docs for KVM_DEV_ARM_VGIC_GRP_IST Sascha Bischoff
2026-08-07 11:32 ` [PATCH v5 39/49] Documentation: KVM: Add the VGICv5 IRS save/restore sequences Sascha Bischoff
2026-08-07 11:32 ` [PATCH v5 40/49] KVM: selftests: Add VGICv5 IRS address attribute tests Sascha Bischoff
2026-08-07 11:33 ` [PATCH v5 41/49] KVM: selftests: Add VGICv5 NR_IRQS " Sascha Bischoff
2026-08-07 11:33 ` [PATCH v5 42/49] KVM: selftests: Add VGICv5 IRS_REGS " Sascha Bischoff
2026-08-07 11:34 ` [PATCH v5 43/49] KVM: selftests: Add VGICv5 IST " Sascha Bischoff
2026-08-07 11:35 ` [PATCH v5 44/49] KVM: selftests: Add VGICv5 USERSPACE_PPIS tests Sascha Bischoff
2026-08-07 11:35 ` [PATCH v5 45/49] KVM: selftests: Add VGICv5 CPU sysreg attribute tests Sascha Bischoff
2026-08-07 11:36 ` [PATCH v5 46/49] KVM: selftests: Add VGICv5 SPI injection tests Sascha Bischoff
2026-08-07 11:36 ` [PATCH v5 47/49] KVM: selftests: Add VGICv5 LPI delivery tests Sascha Bischoff
2026-08-07 11:37 ` [PATCH v5 48/49] KVM: selftests: Add VGICv5 IST save/restore coverage Sascha Bischoff
2026-08-07 11:37 ` [PATCH v5 49/49] KVM: selftests: Add VGICv5 sparse vCPU IDs test Sascha Bischoff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807111159.429128-16-sascha.bischoff@arm.com \
--to=sascha.bischoff@arm.com \
--cc=Joey.Gouly@arm.com \
--cc=Suzuki.Poulose@arm.com \
--cc=Timothy.Hayes@arm.com \
--cc=fuad.tabba@linux.dev \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=maz@kernel.org \
--cc=nd@arm.com \
--cc=oliver.upton@linux.dev \
--cc=peter.maydell@linaro.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox