[PATCH] dmaengine: qcom: hidma_mgmt: fix autosuspend cleanup on probe failure

[PATCH] dmaengine: qcom: hidma_mgmt: fix autosuspend cleanup on probe failure

[Guangshuo Li]

hidma_mgmt_probe() calls pm_runtime_use_autosuspend(), but its failure
path does not call the matching pm_runtime_dont_use_autosuspend()
before disabling runtime PM.

If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during cleanup, this reference is not dropped and usage_count remains
unbalanced.

Add the missing pm_runtime_dont_use_autosuspend() call to the probe
failure path before disabling runtime PM.

This issue was found by manual code inspection.

Fixes: 7f8f209fd6e0 ("dmaengine: add Qualcomm Technologies HIDMA management driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
---
 drivers/dma/qcom/hidma_mgmt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
index 4805ce390ffa..470c88f36d25 100644
--- a/drivers/dma/qcom/hidma_mgmt.c
+++ b/drivers/dma/qcom/hidma_mgmt.c
@@ -168,7 +168,11 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 	pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
+
+	rc = devm_pm_runtime_enable(&pdev->dev);
+	if (rc)
+		return rc;
+
 	pm_runtime_get_sync(&pdev->dev);
 
 	virtaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
@@ -310,7 +314,6 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 	return 0;
 out:
 	pm_runtime_put_sync_suspend(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
 	return rc;
 }
 
-- 
2.43.0

Re: [PATCH] dmaengine: qcom: hidma_mgmt: fix autosuspend cleanup on probe failure

[Frank Li]

On Sat, Aug 08, 2026 at 07:20:43PM +0800, Guangshuo Li wrote:
> hidma_mgmt_probe() calls pm_runtime_use_autosuspend(), but its failure
> path does not call the matching pm_runtime_dont_use_autosuspend()
> before disabling runtime PM.
>
> If the autosuspend delay is set to a negative value while autosuspend
> is enabled, the runtime PM core increments usage_count to prevent
> runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
> during cleanup, this reference is not dropped and usage_count remains
> unbalanced.
>
> Add the missing pm_runtime_dont_use_autosuspend() call to the probe
> failure path before disabling runtime PM.
>
> This issue was found by manual code inspection.

Your descripption doesn't match your patch. You change change pm_runtime_enable()
to devm_pm_runtime_enable()

Frank

>
> Fixes: 7f8f209fd6e0 ("dmaengine: add Qualcomm Technologies HIDMA management driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
>  drivers/dma/qcom/hidma_mgmt.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
> index 4805ce390ffa..470c88f36d25 100644
> --- a/drivers/dma/qcom/hidma_mgmt.c
> +++ b/drivers/dma/qcom/hidma_mgmt.c
> @@ -168,7 +168,11 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
>  	pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
>  	pm_runtime_use_autosuspend(&pdev->dev);
>  	pm_runtime_set_active(&pdev->dev);
> -	pm_runtime_enable(&pdev->dev);
> +
> +	rc = devm_pm_runtime_enable(&pdev->dev);
> +	if (rc)
> +		return rc;
> +
>  	pm_runtime_get_sync(&pdev->dev);
>
>  	virtaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> @@ -310,7 +314,6 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
>  	return 0;
>  out:
>  	pm_runtime_put_sync_suspend(&pdev->dev);
> -	pm_runtime_disable(&pdev->dev);
>  	return rc;
>  }
>
> --
> 2.43.0
>

Re: [PATCH] dmaengine: qcom: hidma_mgmt: fix autosuspend cleanup on probe failure

[Guangshuo Li]

Hi Frank,

Thanks for the review.

On Thu, 1 Oct 2026 at 04:35, Frank Li <Frank.li@oss.nxp.com> wrote:
>
> On Sat, Aug 08, 2026 at 07:20:43PM +0800, Guangshuo Li wrote:
> > hidma_mgmt_probe() calls pm_runtime_use_autosuspend(), but its failure
> > path does not call the matching pm_runtime_dont_use_autosuspend()
> > before disabling runtime PM.
> >
> > If the autosuspend delay is set to a negative value while autosuspend
> > is enabled, the runtime PM core increments usage_count to prevent
> > runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
> > during cleanup, this reference is not dropped and usage_count remains
> > unbalanced.
> >
> > Add the missing pm_runtime_dont_use_autosuspend() call to the probe
> > failure path before disabling runtime PM.
> >
> > This issue was found by manual code inspection.
>
> Your descripption doesn't match your patch. You change change pm_runtime_enable()
> to devm_pm_runtime_enable()
>
> Frank
>
> >
> > Fixes: 7f8f209fd6e0 ("dmaengine: add Qualcomm Technologies HIDMA management driver")
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> > ---
> >  drivers/dma/qcom/hidma_mgmt.c | 7 +++++--
> >  1 file changed, 5 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/dma/qcom/hidma_mgmt.c b/drivers/dma/qcom/hidma_mgmt.c
> > index 4805ce390ffa..470c88f36d25 100644
> > --- a/drivers/dma/qcom/hidma_mgmt.c
> > +++ b/drivers/dma/qcom/hidma_mgmt.c
> > @@ -168,7 +168,11 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
> >       pm_runtime_set_autosuspend_delay(&pdev->dev, HIDMA_AUTOSUSPEND_TIMEOUT);
> >       pm_runtime_use_autosuspend(&pdev->dev);
> >       pm_runtime_set_active(&pdev->dev);
> > -     pm_runtime_enable(&pdev->dev);
> > +
> > +     rc = devm_pm_runtime_enable(&pdev->dev);
> > +     if (rc)
> > +             return rc;
> > +
> >       pm_runtime_get_sync(&pdev->dev);
> >
> >       virtaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> > @@ -310,7 +314,6 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
> >       return 0;
> >  out:
> >       pm_runtime_put_sync_suspend(&pdev->dev);
> > -     pm_runtime_disable(&pdev->dev);
> >       return rc;
> >  }
> >
> > --
> > 2.43.0
> >

You are right, the description of the patch does not match the actual
change. This was my mistake.

The patch tried to address the missing autosuspend cleanup, but
instead of adding the explicit pm_runtime_dont_use_autosuspend() call
in the error path, it switched to devm_pm_runtime_enable(). This made
the implementation and the commit message inconsistent.

I will prepare and send a v2 patch with the fix matching the description.

Thanks again for catching this.

Best regards,
Guangshuo