[PATCH v3 0/8] Properly describe mt6589 and mt8167 toprgu resets

[PATCH v3 0/8] Properly describe mt6589 and mt8167 toprgu resets

[Luca Leonardo Scorcia]

Currently mt8167 inherits its watchdog from the included mt8516 dtsi,
which in turn falls back on mt6589-wdt, which does not support toprgu
resets yet. This series adds support for mt6589 toprgu resets with bit
definitions obtained from Android stock sources.

However, according to its data sheet, mt8167 has 15 sw resets instead of
12, and its reset bits point to different subsystems than the mt6589 ones.
If the number of resets varies between SoCs, the watchdog driver becomes
incompatible.

Therefore in the first three patches we improve the description of the,
resets for mt6589 using the definitions obtained from Android sources.

Then we introduce a dedicated mediatek,mt8167-wdt compatible for the
watchdog driver that describes correctly this SoC's resets. Also while
we're touching the bindings reset header, we add constants for the MMSYS
resets.

In the 7th patch we add a node for the mt8167 watchdog referring to the
new compatible in the SoC dtsi.

In the last patch, we define the mmsys reset table for the SoC. According
to the datasheet, there are 28 mmsys reset bits divided across two
adjacent registers.

Changes in v3 [3]:
- Improved explanations in the commit messages;
- Added the #reset-cells property to mt6589 watchdog node;
- Included the mediatek,mt6589-resets.h file in mt6589.dtsi;
- Included the mediatek,mt8167-resets.h file in mt8167.dtsi;
- Moved the mmsys reset table from the mt8167-mmsys.h header file to
  the mmsys driver implementation.

Changes in v2 [2]:
- Sashiko pointed out correctly a missing entry in the mmsys reset table
  in the last patch.

Initial version: [1]

[1] https://lore.kernel.org/linux-mediatek/20260717151134.678839-1-l.scorcia@gmail.com/
[2] https://lore.kernel.org/linux-mediatek/20260717163959.714561-1-l.scorcia@gmail.com/

Luca Leonardo Scorcia (8):
  dt-bindings: reset: Add mt6589 toprgu reset IDs
  watchdog: mediatek: Add wdt/toprgu resets for MT6589
  arm: dts: mediatek: mt6589: Enable toprgu reset controller
  dt-bindings: watchdog: Add compatible for MediaTek mt8167
  dt-bindings: reset: Add reset controller constants for mt8167
  watchdog: mediatek: Add support for mt8167 TOPRGU/WDT
  arm64: dts: mt8167: Properly describe the SoC watchdog
  soc: mediatek: mtk-mmsys: Add resets for mt8167

 .../bindings/watchdog/mediatek,mtk-wdt.yaml   |  1 +
 arch/arm/boot/dts/mediatek/mt6589.dtsi        |  2 +
 arch/arm64/boot/dts/mediatek/mt8167.dtsi      |  8 +++
 drivers/soc/mediatek/mt8167-mmsys.h           |  3 ++
 drivers/soc/mediatek/mtk-mmsys.c              | 38 +++++++++++++
 drivers/watchdog/mtk_wdt.c                    | 13 ++++-
 .../reset/mediatek,mt6589-resets.h            | 24 +++++++++
 .../reset/mediatek,mt8167-resets.h            | 53 +++++++++++++++++++
 8 files changed, 141 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/reset/mediatek,mt6589-resets.h
 create mode 100644 include/dt-bindings/reset/mediatek,mt8167-resets.h

-- 
2.43.0

[PATCH v3 1/8] dt-bindings: reset: Add mt6589 toprgu reset IDs

[Luca Leonardo Scorcia]

Currently mt6589 watchdog driver implements the watchdog feature, but
not the reset controller feature, which is actually supported by the
hardware.

Add the bit definitions for the 12 mt6589 toprgu resets, which will be
used in the following patch to enable the reset controller. Values
determined from stock Android sources.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 .../reset/mediatek,mt6589-resets.h            | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 include/dt-bindings/reset/mediatek,mt6589-resets.h

diff --git a/include/dt-bindings/reset/mediatek,mt6589-resets.h b/include/dt-bindings/reset/mediatek,mt6589-resets.h
new file mode 100644
index 000000000000..ee08c39df513
--- /dev/null
+++ b/include/dt-bindings/reset/mediatek,mt6589-resets.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Author: Luca Leonardo Scorcia <l.scorcia@gmail.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT6589
+#define _DT_BINDINGS_RESET_CONTROLLER_MT6589
+
+/* TOPRGU resets */
+#define MT6589_TOPRGU_INFRA_SW_RST		0
+#define MT6589_TOPRGU_MM_SW_RST			1
+#define MT6589_TOPRGU_MFG_SW_RST		2
+#define MT6589_TOPRGU_VENC_SW_RST		3
+#define MT6589_TOPRGU_VDEC_SW_RST		4
+#define MT6589_TOPRGU_IMG_SW_RST		5
+#define MT6589_TOPRGU_DDRPHY_SW_RST		6
+#define MT6589_TOPRGU_MD_SW_RST			7
+#define MT6589_TOPRGU_INFRA_AO_SW_RST		8
+#define MT6589_TOPRGU_MD_LITE_SW_RST		9
+#define MT6589_TOPRGU_APMIXED_SW_RST		10
+#define MT6589_TOPRGU_PWRAP_SPI_CTL_RST		11
+#define MT6589_TOPRGU_SW_RST_NUM		12
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT6589 */
-- 
2.43.0

[PATCH v3 2/8] watchdog: mediatek: Add wdt/toprgu resets for MT6589

[Luca Leonardo Scorcia]

According to Android sources, MT6589 has 12 reset bits in the
WDT_SWSYSRST register. Populate toprgu_sw_rst_num to allow toprgu resets
in device trees of the many compatible devices.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 drivers/watchdog/mtk_wdt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 91d110646e16..e61f6ae74327 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/reset/mt2712-resets.h>
+#include <dt-bindings/reset/mediatek,mt6589-resets.h>
 #include <dt-bindings/reset/mediatek,mt6735-wdt.h>
 #include <dt-bindings/reset/mediatek,mt6795-resets.h>
 #include <dt-bindings/reset/mt7986-resets.h>
@@ -88,6 +89,10 @@ static const struct mtk_wdt_data mt2712_data = {
 	.toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
 };
 
+static const struct mtk_wdt_data mt6589_data = {
+	.toprgu_sw_rst_num = MT6589_TOPRGU_SW_RST_NUM,
+};
+
 static const struct mtk_wdt_data mt6735_data = {
 	.toprgu_sw_rst_num = MT6735_TOPRGU_RST_NUM,
 };
@@ -493,7 +498,7 @@ static int mtk_wdt_resume(struct device *dev)
 
 static const struct of_device_id mtk_wdt_dt_ids[] = {
 	{ .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
-	{ .compatible = "mediatek,mt6589-wdt" },
+	{ .compatible = "mediatek,mt6589-wdt", .data = &mt6589_data },
 	{ .compatible = "mediatek,mt6735-wdt", .data = &mt6735_data },
 	{ .compatible = "mediatek,mt6795-wdt", .data = &mt6795_data },
 	{ .compatible = "mediatek,mt7986-wdt", .data = &mt7986_data },
-- 
2.43.0

[PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Luca Leonardo Scorcia]

Enable the toprgu reset controller feature for the mt6589 SoC. This
allows generating reset signals for the 12 subsystems managed by its
top reset generation unit.

Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 arch/arm/boot/dts/mediatek/mt6589.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/mediatek/mt6589.dtsi b/arch/arm/boot/dts/mediatek/mt6589.dtsi
index 46dea445742b..181d1b1ed9b3 100644
--- a/arch/arm/boot/dts/mediatek/mt6589.dtsi
+++ b/arch/arm/boot/dts/mediatek/mt6589.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/mediatek,mt6589-resets.h>
 
 / {
 	#address-cells = <1>;
@@ -147,6 +148,7 @@ uart3: serial@11009000 {
 		wdt: watchdog@10000000 {
 			compatible = "mediatek,mt6589-wdt";
 			reg = <0x10000000 0x44>;
+			#reset-cells = <1>;
 		};
 	};
 };
-- 
2.43.0

Re: [PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Akari Tsuyukusa]

On Sun, Aug 09, 2026 at 06:03:27PM +0200, Luca Leonardo Scorcia wrote:
> Enable the toprgu reset controller feature for the mt6589 SoC. This
> allows generating reset signals for the 12 subsystems managed by its
> top reset generation unit.
> 
> Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
> Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
> ---
>  arch/arm/boot/dts/mediatek/mt6589.dtsi | 2 ++
>  1 file changed, 2 insertions(+)

I provided "Acked-by", not "Signed-off-by"...
https://lore.kernel.org/linux-mediatek/amEBgRmQktZ44jc1@buffalo-ssd/

PS: I am also fine with this patch carrying my Signed-off-by.
Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>

Best Regards,
Akari

Re: [PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Luca Leonardo Scorcia]

I apologize for the mistake - if a new revision will be necessary I'll
correct it with the Acked-by tag.
Thank you!

Il giorno dom 9 ago 2026 alle ore 19:04 Akari Tsuyukusa
<akkun11.open@gmail.com> ha scritto:
>
> On Sun, Aug 09, 2026 at 06:03:27PM +0200, Luca Leonardo Scorcia wrote:
> > Enable the toprgu reset controller feature for the mt6589 SoC. This
> > allows generating reset signals for the 12 subsystems managed by its
> > top reset generation unit.
> >
> > Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
> > Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
> > ---
> >  arch/arm/boot/dts/mediatek/mt6589.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
>
> I provided "Acked-by", not "Signed-off-by"...
> https://lore.kernel.org/linux-mediatek/amEBgRmQktZ44jc1@buffalo-ssd/
>
> PS: I am also fine with this patch carrying my Signed-off-by.
> Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
>
> Best Regards,
> Akari



-- 
Luca Leonardo Scorcia
l.scorcia@gmail.com

Re: [PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Akari Tsuyukusa]

Hi Luca,

On Mon, Aug 10, 2026 at 2:08 AM Luca Leonardo Scorcia
<l.scorcia@gmail.com> wrote:
>
> I apologize for the mistake - if a new revision will be necessary I'll
> correct it with the Acked-by tag.
> Thank you!
>
> Il giorno dom 9 ago 2026 alle ore 19:04 Akari Tsuyukusa
> <akkun11.open@gmail.com> ha scritto:
> >
> > On Sun, Aug 09, 2026 at 06:03:27PM +0200, Luca Leonardo Scorcia wrote:
> > > Enable the toprgu reset controller feature for the mt6589 SoC. This
> > > allows generating reset signals for the 12 subsystems managed by its
> > > top reset generation unit.
> > >
> > > Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
> > > Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
> > > ---
> > >  arch/arm/boot/dts/mediatek/mt6589.dtsi | 2 ++
> > >  1 file changed, 2 insertions(+)
> >
> > I provided "Acked-by", not "Signed-off-by"...
> > https://lore.kernel.org/linux-mediatek/amEBgRmQktZ44jc1@buffalo-ssd/
> >
> > PS: I am also fine with this patch carrying my Signed-off-by.
> > Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>

Sorry, I made a mistake in my previous email.
The Acked-by I mentioned was for patch 1 of the series, not this patch.
I did not provide an Acked-by for this patch.

The Signed-off-by was not what I originally provided, but I am fine
with keeping it for this patch.

Sorry for the confusion.

Best Regards,
Akari

Re: [PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Guenter Roeck]

On 8/9/26 10:04, Akari Tsuyukusa wrote:
> On Sun, Aug 09, 2026 at 06:03:27PM +0200, Luca Leonardo Scorcia wrote:
>> Enable the toprgu reset controller feature for the mt6589 SoC. This
>> allows generating reset signals for the 12 subsystems managed by its
>> top reset generation unit.
>>
>> Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
>> Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
>> ---
>>   arch/arm/boot/dts/mediatek/mt6589.dtsi | 2 ++
>>   1 file changed, 2 insertions(+)
> 
> I provided "Acked-by", not "Signed-off-by"...
> https://lore.kernel.org/linux-mediatek/amEBgRmQktZ44jc1@buffalo-ssd/
> 
> PS: I am also fine with this patch carrying my Signed-off-by.
> Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
> 

That is completely inappropriate and unacceptable. You are not in the
Sign-off chain.

Guenter

Re: [PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Luca Leonardo Scorcia]

Hi,
I added his Signed-off tag as he provided basically this same patch in
a separate series [1] slightly before this submission and I wanted to
acknowledge his work. As far as I understand, this attribution is
within the guidelines.

[1] https://lore.kernel.org/linux-mediatek/20260716161923.266315-8-akkun11.open@gmail.com/

Il giorno dom 9 ago 2026 alle ore 19:49 Guenter Roeck
<linux@roeck-us.net> ha scritto:
>
> On 8/9/26 10:04, Akari Tsuyukusa wrote:
> > On Sun, Aug 09, 2026 at 06:03:27PM +0200, Luca Leonardo Scorcia wrote:
> >> Enable the toprgu reset controller feature for the mt6589 SoC. This
> >> allows generating reset signals for the 12 subsystems managed by its
> >> top reset generation unit.
> >>
> >> Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
> >> Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
> >> ---
> >>   arch/arm/boot/dts/mediatek/mt6589.dtsi | 2 ++
> >>   1 file changed, 2 insertions(+)
> >
> > I provided "Acked-by", not "Signed-off-by"...
> > https://lore.kernel.org/linux-mediatek/amEBgRmQktZ44jc1@buffalo-ssd/
> >
> > PS: I am also fine with this patch carrying my Signed-off-by.
> > Signed-off-by: Akari Tsuyukusa <akkun11.open@gmail.com>
> >
>
> That is completely inappropriate and unacceptable. You are not in the
> Sign-off chain.
>
> Guenter
>


-- 
Luca Leonardo Scorcia
l.scorcia@gmail.com

Re: [PATCH v3 3/8] arm: dts: mediatek: mt6589: Enable toprgu reset controller

[Guenter Roeck]

On 8/9/26 11:55, Luca Leonardo Scorcia wrote:
> Hi,
> I added his Signed-off tag as he provided basically this same patch in
> a separate series [1] slightly before this submission and I wanted to
> acknowledge his work. As far as I understand, this attribution is
> within the guidelines.
> 

 From Documentation/process/submitting-patches.rst:

   Any further SoBs (Signed-off-by:'s) following the author's SoB are from
   people handling and transporting the patch, but were not involved in its
          ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
   development. SoB chains should reflect the **real** route a patch took
   ^^^^^^^^^^^
   as it was propagated to the maintainers and ultimately to Linus, with
   the first SoB entry signalling primary authorship of a single author.

I won't apply this patch anyway, so it is for others to decide if
"this attribution is within the guidelines". I stand by earlier
statement.

Thanks,
Guenter

[PATCH v3 4/8] dt-bindings: watchdog: Add compatible for MediaTek mt8167

[Luca Leonardo Scorcia]

Currently mt8167 inherits its watchdog from the included mt8516 dtsi,
which in turn falls back on mt6589-wdt. However according to the data
sheet mt8167 has 15 sw resets instead of 12, and the systems to which
each reset bit corresponds are different from mt6589, so the reset bit
constants are different too.

If the number of resets varies between SoCs, the watchdog driver becomes
incompatible. Update the wdt binding to add a dedicated compatible for
mt8167.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
index 953629cb9558..f514be8a5851 100644
--- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml
@@ -26,6 +26,7 @@ properties:
           - mediatek,mt6795-wdt
           - mediatek,mt7986-wdt
           - mediatek,mt7988-wdt
+          - mediatek,mt8167-wdt
           - mediatek,mt8183-wdt
           - mediatek,mt8186-wdt
           - mediatek,mt8188-wdt
-- 
2.43.0

[PATCH v3 5/8] dt-bindings: reset: Add reset controller constants for mt8167

[Luca Leonardo Scorcia]

Add the various bits that identify watchdog and mmsys resets. IDs for
mmsys resets restart from zero as they are used in a different device.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 .../reset/mediatek,mt8167-resets.h            | 53 +++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 include/dt-bindings/reset/mediatek,mt8167-resets.h

diff --git a/include/dt-bindings/reset/mediatek,mt8167-resets.h b/include/dt-bindings/reset/mediatek,mt8167-resets.h
new file mode 100644
index 000000000000..af8a3e499f8b
--- /dev/null
+++ b/include/dt-bindings/reset/mediatek,mt8167-resets.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8167
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8167
+
+/* TOPRGU resets, these are actual bits in the register */
+#define MT8167_TOPRGU_DDRPHY_FLASH_RST		0
+#define MT8167_TOPRGU_AUD_PAD_RST		1
+#define MT8167_TOPRGU_MM_RST			2
+#define MT8167_TOPRGU_MFG_RST			3
+#define MT8167_TOPRGU_MDSYS_RST			4
+#define MT8167_TOPRGU_CONN_RST			5
+#define MT8167_TOPRGU_PAD2CAM_DIG_MIPI_RX_RST	6
+#define MT8167_TOPRGU_DIG_MIPI_TX_RST		7
+#define MT8167_TOPRGU_SPI_PAD_MACRO_RST		8
+/* The data sheet describes bit 9 as "reserved, unused" */
+#define MT8167_TOPRGU_APMIXED_RST		10
+#define MT8167_TOPRGU_VDEC_RST			11
+#define MT8167_TOPRGU_CONN_MCU_RST		12
+#define MT8167_TOPRGU_EFUSE_RST			13
+#define MT8167_TOPRGU_PWRAP_SPICTL_RST		14
+#define MT8167_TOPRGU_SW_RST_NUM		15
+
+/* MMSYS resets, these are IDs */
+#define MT8167_MMSYS_SW0_RST_B_SMI_COMMON	0
+#define MT8167_MMSYS_SW0_RST_B_SMI_LARB0	1
+#define MT8167_MMSYS_SW0_RST_B_CAM_MDP		2
+#define MT8167_MMSYS_SW0_RST_B_MDP_RDMA0	3
+#define MT8167_MMSYS_SW0_RST_B_MDP_RSZ0		4
+#define MT8167_MMSYS_SW0_RST_B_MDP_RSZ1		5
+#define MT8167_MMSYS_SW0_RST_B_MDP_TDSHP0	6
+#define MT8167_MMSYS_SW0_RST_B_MDP_WDMA		7
+#define MT8167_MMSYS_SW0_RST_B_MDP_WROT0	8
+#define MT8167_MMSYS_SW0_RST_B_FAKE_ENG		9
+#define MT8167_MMSYS_SW0_RST_B_MUTEX		10
+#define MT8167_MMSYS_SW0_RST_B_DISP_OVL0	11
+#define MT8167_MMSYS_SW0_RST_B_DISP_RDMA0	12
+#define MT8167_MMSYS_SW0_RST_B_DISP_RDMA1	13
+#define MT8167_MMSYS_SW0_RST_B_DISP_WDMA0	14
+#define MT8167_MMSYS_SW0_RST_B_DISP_COLOR	15
+#define MT8167_MMSYS_SW0_RST_B_DISP_CCORR	16
+#define MT8167_MMSYS_SW0_RST_B_DISP_AAL		17
+#define MT8167_MMSYS_SW0_RST_B_DISP_GAMMA	18
+#define MT8167_MMSYS_SW0_RST_B_DISP_DITHER	19
+#define MT8167_MMSYS_SW0_RST_B_DISP_UFOE	20
+#define MT8167_MMSYS_SW0_RST_B_DISP_PWM		21
+#define MT8167_MMSYS_SW0_RST_B_DSI0		22
+#define MT8167_MMSYS_SW0_RST_B_DPI0		23
+#define MT8167_MMSYS_SW0_RST_B_MIPI_TX_CONFIG	24
+#define MT8167_MMSYS_SW1_RST_B_LVDS_ENCODER	25
+#define MT8167_MMSYS_SW1_RST_B_DPI1		26
+#define MT8167_MMSYS_SW1_RST_B_HDMI		27
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8167 */
-- 
2.43.0

[PATCH v3 6/8] watchdog: mediatek: Add support for mt8167 TOPRGU/WDT

[Luca Leonardo Scorcia]

Add support for the Top Reset Generation Unit/Watchdog Timer found on
mt8167.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 drivers/watchdog/mtk_wdt.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index e61f6ae74327..10a3d4b5ee30 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -13,6 +13,7 @@
 #include <dt-bindings/reset/mediatek,mt6589-resets.h>
 #include <dt-bindings/reset/mediatek,mt6735-wdt.h>
 #include <dt-bindings/reset/mediatek,mt6795-resets.h>
+#include <dt-bindings/reset/mediatek,mt8167-resets.h>
 #include <dt-bindings/reset/mt7986-resets.h>
 #include <dt-bindings/reset/mt8183-resets.h>
 #include <dt-bindings/reset/mt8186-resets.h>
@@ -110,6 +111,10 @@ static const struct mtk_wdt_data mt7988_data = {
 	.has_swsysrst_en = true,
 };
 
+static const struct mtk_wdt_data mt8167_data = {
+	.toprgu_sw_rst_num = MT8167_TOPRGU_SW_RST_NUM,
+};
+
 static const struct mtk_wdt_data mt8183_data = {
 	.toprgu_sw_rst_num = MT8183_TOPRGU_SW_RST_NUM,
 };
@@ -503,6 +508,7 @@ static const struct of_device_id mtk_wdt_dt_ids[] = {
 	{ .compatible = "mediatek,mt6795-wdt", .data = &mt6795_data },
 	{ .compatible = "mediatek,mt7986-wdt", .data = &mt7986_data },
 	{ .compatible = "mediatek,mt7988-wdt", .data = &mt7988_data },
+	{ .compatible = "mediatek,mt8167-wdt", .data = &mt8167_data },
 	{ .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
 	{ .compatible = "mediatek,mt8186-wdt", .data = &mt8186_data },
 	{ .compatible = "mediatek,mt8188-wdt", .data = &mt8188_data },
-- 
2.43.0

[PATCH v3 7/8] arm64: dts: mt8167: Properly describe the SoC watchdog

[Luca Leonardo Scorcia]

Currently mt8167 inherits its watchdog from the included mt8516 dtsi,
which in turn falls back on mt6589-wdt. However according to the data
sheet mt8167 has 15 sw resets instead of 12, and the reset bits are
different from mt6589.

Use the dedicated mediatek,mt8167-wdt compatible for the watchdog driver,
as it correctly describes the SoC resets.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 arch/arm64/boot/dts/mediatek/mt8167.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 27cf32d7ae35..edfffe35ec14 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/clock/mt8167-clk.h>
 #include <dt-bindings/memory/mt8167-larb-port.h>
 #include <dt-bindings/power/mt8167-power.h>
+#include <dt-bindings/reset/mediatek,mt8167-resets.h>
 
 #include "mt8167-pinfunc.h"
 
@@ -95,6 +96,13 @@ power-domain@MT8167_POWER_DOMAIN_CONN {
 			};
 		};
 
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8167-wdt";
+			reg = <0 0x10007000 0 0x1000>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@1000b000 {
 			compatible = "mediatek,mt8167-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
-- 
2.43.0

[PATCH v3 8/8] soc: mediatek: mtk-mmsys: Add resets for mt8167

[Luca Leonardo Scorcia]

The mt8167 SoC has 64 MMSYS resets, split in two contiguous 32-bits
registers, MMSYS_SW0_RST_B (0x140) and MMSYS_SW1_RST_B (0x144), as
also stated in the downstream kernel for the Lenovo Smart Clock
in the ddp_reg.h header.

Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
---
 drivers/soc/mediatek/mt8167-mmsys.h |  3 +++
 drivers/soc/mediatek/mtk-mmsys.c    | 38 +++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/soc/mediatek/mt8167-mmsys.h b/drivers/soc/mediatek/mt8167-mmsys.h
index eef14083c47b..27793462ce0d 100644
--- a/drivers/soc/mediatek/mt8167-mmsys.h
+++ b/drivers/soc/mediatek/mt8167-mmsys.h
@@ -3,6 +3,9 @@
 #ifndef __SOC_MEDIATEK_MT8167_MMSYS_H
 #define __SOC_MEDIATEK_MT8167_MMSYS_H
 
+#define MT8167_MMSYS_SW0_RST_B				0x140
+#define MT8167_MMSYS_SW1_RST_B				0x144
+
 #define MT8167_DISP_REG_CONFIG_DISP_OVL0_MOUT_EN	0x030
 #define MT8167_DISP_REG_CONFIG_DISP_DITHER_MOUT_EN	0x038
 #define MT8167_DISP_REG_CONFIG_DISP_COLOR0_SEL_IN	0x058
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index 2f3e0778bb17..02649225e8a7 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -4,6 +4,7 @@
  * Author: James Liao <jamesjj.liao@mediatek.com>
  */
 
+#include <dt-bindings/reset/mediatek,mt8167-resets.h>
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/io.h>
@@ -53,10 +54,47 @@ static const struct mtk_mmsys_driver_data mt6797_mmsys_driver_data = {
 	.clk_driver = "clk-mt6797-mm",
 };
 
+static const u8 mmsys_mt8167_rst_tb[] = {
+	[MT8167_MMSYS_SW0_RST_B_SMI_COMMON]	= MMSYS_RST_NR(0, 0),
+	[MT8167_MMSYS_SW0_RST_B_SMI_LARB0]	= MMSYS_RST_NR(0, 1),
+	[MT8167_MMSYS_SW0_RST_B_CAM_MDP]	= MMSYS_RST_NR(0, 2),
+	[MT8167_MMSYS_SW0_RST_B_MDP_RDMA0]	= MMSYS_RST_NR(0, 3),
+	[MT8167_MMSYS_SW0_RST_B_MDP_RSZ0]	= MMSYS_RST_NR(0, 4),
+	[MT8167_MMSYS_SW0_RST_B_MDP_RSZ1]	= MMSYS_RST_NR(0, 5),
+	[MT8167_MMSYS_SW0_RST_B_MDP_TDSHP0]	= MMSYS_RST_NR(0, 6),
+	[MT8167_MMSYS_SW0_RST_B_MDP_WDMA]	= MMSYS_RST_NR(0, 7),
+	[MT8167_MMSYS_SW0_RST_B_MDP_WROT0]	= MMSYS_RST_NR(0, 8),
+	[MT8167_MMSYS_SW0_RST_B_FAKE_ENG]	= MMSYS_RST_NR(0, 9),
+	[MT8167_MMSYS_SW0_RST_B_MUTEX]		= MMSYS_RST_NR(0, 10),
+	[MT8167_MMSYS_SW0_RST_B_DISP_OVL0]	= MMSYS_RST_NR(0, 11),
+	[MT8167_MMSYS_SW0_RST_B_DISP_RDMA0]	= MMSYS_RST_NR(0, 12),
+	[MT8167_MMSYS_SW0_RST_B_DISP_RDMA1]	= MMSYS_RST_NR(0, 13),
+	[MT8167_MMSYS_SW0_RST_B_DISP_WDMA0]	= MMSYS_RST_NR(0, 14),
+	[MT8167_MMSYS_SW0_RST_B_DISP_COLOR]	= MMSYS_RST_NR(0, 15),
+	[MT8167_MMSYS_SW0_RST_B_DISP_CCORR]	= MMSYS_RST_NR(0, 16),
+	[MT8167_MMSYS_SW0_RST_B_DISP_AAL]	= MMSYS_RST_NR(0, 17),
+	[MT8167_MMSYS_SW0_RST_B_DISP_GAMMA]	= MMSYS_RST_NR(0, 18),
+	[MT8167_MMSYS_SW0_RST_B_DISP_DITHER]	= MMSYS_RST_NR(0, 19),
+	[MT8167_MMSYS_SW0_RST_B_DISP_UFOE]	= MMSYS_RST_NR(0, 20),
+	[MT8167_MMSYS_SW0_RST_B_DISP_PWM]	= MMSYS_RST_NR(0, 21),
+	[MT8167_MMSYS_SW0_RST_B_DSI0]		= MMSYS_RST_NR(0, 22),
+	[MT8167_MMSYS_SW0_RST_B_DPI0]		= MMSYS_RST_NR(0, 23),
+	/* bit 24 is SMI_COMMON again according to data sheet */
+	/* bit 25 is SMI_LARB0 again according to data sheet */
+	[MT8167_MMSYS_SW0_RST_B_MIPI_TX_CONFIG]	= MMSYS_RST_NR(0, 26),
+	/* all other bits are not described in data sheet */
+	[MT8167_MMSYS_SW1_RST_B_LVDS_ENCODER]	= MMSYS_RST_NR(1, 2),
+	[MT8167_MMSYS_SW1_RST_B_DPI1]		= MMSYS_RST_NR(1, 3),
+	[MT8167_MMSYS_SW1_RST_B_HDMI]		= MMSYS_RST_NR(1, 4),
+};
+
 static const struct mtk_mmsys_driver_data mt8167_mmsys_driver_data = {
 	.clk_driver = "clk-mt8167-mm",
 	.routes = mt8167_mmsys_routing_table,
 	.num_routes = ARRAY_SIZE(mt8167_mmsys_routing_table),
+	.sw0_rst_offset = MT8167_MMSYS_SW0_RST_B,
+	.rst_tb = mmsys_mt8167_rst_tb,
+	.num_resets = ARRAY_SIZE(mmsys_mt8167_rst_tb),
 };
 
 static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
-- 
2.43.0