[PATCH 3/8] ARM: dts: aspeed: nvidia: Declare SPI NOR flashes on boards

[Jacky Huang <jackyhuang@nvidia.com>]

Declare jedec,spi-nor flash nodes with the properties previously
inherited from aspeed-g6.dtsi stubs. Keep status = "okay" so these
boards stay enabled while the SoC stubs still exist.

Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 5 +++++
 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts     | 5 +++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
index 4de38613b0ea..c8788c67ddec 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -145,8 +145,10 @@ &fmc {
 	flash@0 {
 		status = "okay";
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "bmc";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
@@ -180,9 +182,12 @@ &spi2 {
 
 	// Data SPI is 64MB in size
 	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
 		status = "okay";
 		label = "config";
 		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 		partitions {
 			compatible = "fixed-partitions";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
index 29f56176e2ca..0228764721bf 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts
@@ -56,17 +56,22 @@ &fmc {
 
 	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		label = "bmc";
 		status = "okay";
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <2>;
 		#include "openbmc-flash-layout-128.dtsi"
 	};
 
 	flash@1 {
 		compatible = "jedec,spi-nor";
+		reg = <1>;
 		label = "alt-bmc";
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		status = "okay";
+		spi-max-frequency = <50000000>;
 		#include "openbmc-flash-layout-128-alt.dtsi"
 	};
 };
-- 
2.43.0