From: Jacky Huang <jackyhuang@nvidia.com>
To: Andrew Jeffery <andrew@codeconstruct.com.au>,
Joel Stanley <joel@jms.id.au>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Billy Tsai <billy_tsai@aspeedtech.com>,
<devicetree@vger.kernel.org>, <linux-aspeed@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <openbmc@lists.ozlabs.org>,
Jacky Huang <jackyhuang@nvidia.com>
Subject: [PATCH 8/8] ARM: dts: aspeed: g6: Remove board-level flash stubs
Date: Thu, 13 Aug 2026 19:22:33 +0900 [thread overview]
Message-ID: <20260813102233.3088939-9-jackyhuang@nvidia.com> (raw)
In-Reply-To: <20260813102233.3088939-1-jackyhuang@nvidia.com>
SPI NOR flashes describe board population, not SoC IP. With boards
now declaring the flashes they use, drop the disabled flash@*
stubs from aspeed-g6.dtsi and leave only the FMC/SPI controllers.
Signed-off-by: Jacky Huang <jackyhuang@nvidia.com>
---
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 56 -------------------------
1 file changed, 56 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index edf4b74f5aba..de705c544847 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -119,27 +119,6 @@ fmc: spi@1e620000 {
clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- flash@0 {
- reg = < 0 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
- flash@1 {
- reg = < 1 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
- flash@2 {
- reg = < 2 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
};
spi1: spi@1e630000 {
@@ -149,20 +128,6 @@ spi1: spi@1e630000 {
compatible = "aspeed,ast2600-spi";
clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
- flash@0 {
- reg = < 0 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
- flash@1 {
- reg = < 1 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
};
spi2: spi@1e631000 {
@@ -172,27 +137,6 @@ spi2: spi@1e631000 {
compatible = "aspeed,ast2600-spi";
clocks = <&syscon ASPEED_CLK_AHB>;
status = "disabled";
- flash@0 {
- reg = < 0 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
- flash@1 {
- reg = < 1 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
- flash@2 {
- reg = < 2 >;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- spi-rx-bus-width = <2>;
- status = "disabled";
- };
};
mdio0: mdio@1e650000 {
--
2.43.0
prev parent reply other threads:[~2026-08-13 10:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-13 10:22 [PATCH 0/8] ARM: dts: aspeed: Move flash nodes out of aspeed-g6.dtsi Jacky Huang
2026-08-13 10:22 ` [PATCH 1/8] ARM: dts: aspeed: facebook: Declare SPI NOR flashes on boards Jacky Huang
2026-08-13 10:22 ` [PATCH 2/8] ARM: dts: aspeed: ibm: " Jacky Huang
2026-08-13 10:22 ` [PATCH 3/8] ARM: dts: aspeed: nvidia: " Jacky Huang
2026-08-13 10:22 ` [PATCH 4/8] ARM: dts: aspeed: ampere: " Jacky Huang
2026-08-13 10:22 ` [PATCH 5/8] ARM: dts: aspeed: asus: " Jacky Huang
2026-08-13 10:22 ` [PATCH 6/8] ARM: dts: aspeed: inventec: " Jacky Huang
2026-08-13 10:22 ` [PATCH 7/8] ARM: dts: aspeed: Declare SPI NOR flashes on remaining boards Jacky Huang
2026-08-13 10:22 ` Jacky Huang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260813102233.3088939-9-jackyhuang@nvidia.com \
--to=jackyhuang@nvidia.com \
--cc=andrew@codeconstruct.com.au \
--cc=billy_tsai@aspeedtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox