[PATCH 0/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V1 and V2

[PATCH 0/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V1 and V2

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

This series adds device tree overlays for the Toradex Capacitive Touch
Display 10.1" LVDS V1 and V2 with the Verdin iMX8M Plus SoM.

The display addition covers two interface types:

- Native LCDIF (LVDS)
- DSI-to-LVDS adapter based on the SN65DSI84

This change depends on other patch series, and should be applied after
it:

- https://lore.kernel.org/linux-arm-kernel/20260623195741.495734-1-leoreis.costa@gmail.com/T/#t

  Adds the Toradex Capacitive Touch Display 10.1" LVDS V2 overlays for
  the Verdin AM62. This series is required because it adds the panel
  bindings for the display. It is currently in linux-next.

Leonardo Costa (6):
  arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch
    Display 10.1" LVDS
  arm64: dts: freescale: imx8mp-verdin: Add Toradex DSI to LVDS adapter
    with 10.1" display
  arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex
    Display 10.1" LVDS
  arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch
    Display 10.1" LVDS V2
  arm64: dts: freescale: imx8mp-verdin: Add Toradex DSI to LVDS adapter
    with the 10.1" V2 display
  arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex
    Display 10.1" LVDS V2

 arch/arm64/boot/dts/freescale/Makefile        |  31 +++++
 ...zanine-panel-cap-touch-10inch-lvds-v2.dtso | 107 +++++++++++++++
 ...mezzanine-panel-cap-touch-10inch-lvds.dtso |  71 ++++++++++
 ...in-dsi-to-lvds-panel-cap-touch-10inch.dtso |  94 +++++++++++++
 ...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 129 ++++++++++++++++++
 ...verdin-panel-cap-touch-10inch-lvds-v2.dtso | 118 ++++++++++++++++
 ...mp-verdin-panel-cap-touch-10inch-lvds.dtso |  95 +++++++++++++
 7 files changed, 645 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds.dtso

[PATCH 1/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

Add a device tree overlay for the Toradex Capacitive Touch Display 10.1"
LVDS connected via Verdin iMX8M Plus LCDIF on carrier boards exposing LVDS
interface (e.g., Mallow). The panel is a LogicTechno LT170410-2WHC 10.1"
WXGA IPS LCD and the touch input is provided by an Atmel MaxTouch
capacitive touch controller.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  6 ++
 ...mp-verdin-panel-cap-touch-10inch-lvds.dtso | 95 +++++++++++++++++++
 2 files changed, 101 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 201460ee5669..d643f85baa7f 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -514,13 +514,19 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-zinnia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb
 
+imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
+	imx8mp-verdin-wifi-mallow.dtb \
+	imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
+
 imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtbo
 imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-hdmi.dtbo
 imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds.dtso
new file mode 100644
index 000000000000..9079c6284dfa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds.dtso
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 10.1" connected via Verdin iMX8M Plus LCDIF
+ * on carrier boards with a Toradex standard LVDS display connector
+ * (e.g., Mallow).
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	panel-lvds-native {
+		compatible = "logictechno,lt170410-2whc";
+		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_lvds_native_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	/* Verdin PWM_2 (SODIMM 16) */
+	pwms = <&pwm2 0 6666667 PWM_POLARITY_INVERTED>;
+
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2s_2_d_in_gpio: gpio4io30grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1c4>;	/* SODIMM 48 */
+	};
+
+	pinctrl_i2s_2_sync_gpio: gpio4io31grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x184>;	/* SODIMM 44 */
+	};
+};
+
+&atmel_mxt_ts_mezzanine {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_2_d_in_gpio>, <&pinctrl_i2s_2_sync_gpio>;
+	/* Verdin I2S_2_SYNC as GPIO (SODIMM 44) */
+	interrupt-parent = <&gpio4>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	/* Verdin I2S_2_D_IN as GPIO (SODIMM 48) */
+	reset-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+	vdd-supply = <&reg_3p3v>;
+
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	/*
+	 * This display uses 71.1 MHz pixel clock, so IMX8MP_VIDEO_PLL1 needs
+	 * to be 7 times 71.1MHz, or 497.7 MHz as the internal divider will
+	 * always divide the output LVDS clock by 7.
+	 */
+	assigned-clock-rates = <0>, <497700000>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_native_in>;
+			};
+		};
+	};
+};

[PATCH 2/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex DSI to LVDS adapter with 10.1" display

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
Toradex Capacitive Touch Display 10.1" LVDS. The adapter connects to the
Verdin DSI_1 interface. It is based on the Texas Instruments SN65DSI84
DSI-to-LVDS bridge and drives a LogicTechno LT170410-2WHC 10.1" WXGA LVDS
panel. Touch input is provided by an Atmel MaxTouch capacitive touch
controller.

Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  5 +
 ...in-dsi-to-lvds-panel-cap-touch-10inch.dtso | 94 +++++++++++++++++++
 2 files changed, 99 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index d643f85baa7f..c55269a0532a 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -508,6 +508,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
@@ -517,12 +518,16 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-zinnia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb
 
+imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
+	imx8mp-verdin-wifi-dev.dtb \
+	imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
 	imx8mp-verdin-wifi-mallow.dtb \
 	imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso
new file mode 100644
index 000000000000..da05a0256889
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtso
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex DSI to LVDS Adapter on Verdin DSI_1 with Capacitive Touch Display
+ * 10.1", used on Dahlia (X17) and Development Board (X48) that expose DSI_1
+ * via a Samtec LSS-130 connector.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ * https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
+ * https://www.toradex.com/accessories/verdin-dsi-to-lvds-adapter
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	panel-lvds-bridge {
+		compatible = "logictechno,lt170410-2whc";
+		backlight = <&backlight>;
+		power-supply = <&reg_dsi_lvds>;
+
+		port {
+			panel_lvds_bridge_in: endpoint {
+				remote-endpoint = <&dsi_lvds_bridge_out>;
+			};
+		};
+	};
+
+	reg_dsi_lvds: regulator-dsi-lvds {
+		compatible = "regulator-fixed";
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-name = "DSI_1_PWR_EN";
+	};
+};
+
+&atmel_mxt_ts {
+	vdd-supply = <&reg_dsi_lvds>;
+
+	status = "okay";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&lvds_ti_sn65dsi84 {
+	vcc-supply = <&reg_dsi_lvds>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dsi_lvds_bridge_in: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			dsi_lvds_bridge_out: endpoint {
+				remote-endpoint = <&panel_lvds_bridge_in>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <16000000>;
+
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&dsi_lvds_bridge_in>;
+};

[PATCH 3/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

Add a device tree overlay enabling the Toradex Capacitive Touch Display
10.1" LVDS on the Verdin Development Board with Verdin iMX8M Plus
Mezzanine expansion board. The panel connects via the i.MX8M Plus LCDIF
on the Mezzanine LVDS interface (J10). The panel is a LogicTechno
LT170410-2WHC 10.1" WXGA IPS LCD and the touch input is provided by an
Atmel MaxTouch capacitive touch controller.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Link: https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  5 ++
 ...mezzanine-panel-cap-touch-10inch-lvds.dtso | 71 +++++++++++++++++++
 2 files changed, 76 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c55269a0532a..37ae0954d02f 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -508,6 +508,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
@@ -519,6 +520,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb
@@ -528,6 +530,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb
 imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
 	imx8mp-verdin-wifi-dev.dtb \
 	imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
+	imx8mp-verdin-wifi-dev.dtb \
+	imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
 imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
 	imx8mp-verdin-wifi-mallow.dtb \
 	imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso
new file mode 100644
index 000000000000..ce426288081c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtso
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 10.1" LVDS on the Verdin iMX8M Plus
+ * Mezzanine LVDS interface (J10), used with the Verdin Development Board.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ * https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
+ * https://www.toradex.com/accessories/verdin-imx8m-plus-mezzanine
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	panel-lvds-native {
+		compatible = "logictechno,lt170410-2whc";
+		backlight = <&backlight_mezzanine>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_lvds_native_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&atmel_mxt_ts_mezzanine {
+	status = "okay";
+};
+
+&backlight_mezzanine {
+	status = "okay";
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	/*
+	 * This display uses 71.1 MHz pixel clock, so IMX8MP_VIDEO_PLL1 needs
+	 * to be 7 times 71.1MHz, or 497.7 MHz as the internal divider will
+	 * always divide the output LVDS clock by 7.
+	 */
+	assigned-clock-rates = <0>, <497700000>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_native_in>;
+			};
+		};
+	};
+};

[PATCH 4/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex Capacitive Touch Display 10.1" LVDS V2

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

Add a device tree overlay for the Toradex Capacitive Touch Display 10.1"
LVDS V2 connected via Verdin iMX8M Plus LCDIF on carrier boards exposing
LVDS interface (e.g., Mallow). The panel is an Opto Logic
SCX1001511GGC49 10.1" WXGA TFT LCD and the touch input is provided by an
ILITEK ILI251x capacitive touch controller.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   5 +
 ...verdin-panel-cap-touch-10inch-lvds-v2.dtso | 118 ++++++++++++++++++
 2 files changed, 123 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 37ae0954d02f..2bfed5ac66ac 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -517,6 +517,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-zinnia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb
@@ -524,6 +525,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inc
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb
 
@@ -536,6 +538,9 @@ imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
 imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
 	imx8mp-verdin-wifi-mallow.dtb \
 	imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
+imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-v2-dtbs := \
+	imx8mp-verdin-wifi-mallow.dtb \
+	imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtbo
 
 imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtbo
 imx8mp-evk-lvds0-imx-lvds-hdmi-dtbs += imx8mp-evk.dtb imx8mp-evk-lvds0-imx-lvds-hdmi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtso
new file mode 100644
index 000000000000..6b0c1a10ae2a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtso
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 10.1" V2 connected via Verdin iMX8M Plus
+ * LCDIF on carrier boards with a Toradex standard LVDS display connector
+ * (e.g., Mallow).
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	panel-lvds-native {
+		compatible = "optologic,scx1001511ggc49", "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		power-supply = <&reg_3p3v>;
+		height-mm = <136>;
+		width-mm = <217>;
+
+		panel-timing {
+			clock-frequency = <64500000>;
+			hactive = <1280>;
+			hback-porch = <20>;
+			hfront-porch = <20>;
+			hsync-len = <2>;
+			vactive = <800>;
+			vback-porch = <5>;
+			vfront-porch = <5>;
+			vsync-len = <3>;
+			de-active = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_lvds_native_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight {
+	/* Verdin PWM_2 (SODIMM 16) */
+	pwms = <&pwm2 0 6666667 0>;
+
+	status = "okay";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_in_gpio>,
+			    <&pinctrl_i2s_2_sync_gpio>;
+		/* Verdin I2S_2_SYNC as GPIO (SODIMM 44) */
+		interrupt-parent = <&gpio4>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		/* Verdin I2S_2_D_IN as GPIO (SODIMM 48) */
+		reset-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2s_2_d_in_gpio: gpio4io30grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x1c4>;	/* SODIMM 48 */
+	};
+
+	pinctrl_i2s_2_sync_gpio: gpio4io31grp {
+		fsl,pins = <MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x184>;	/* SODIMM 44 */
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	/*
+	 * This display uses 64.5 MHz pixel clock, so IMX8MP_VIDEO_PLL1 needs
+	 * to be 7 times 64.5MHz, or 451.5 MHz as the internal divider will
+	 * always divide the output LVDS clock by 7.
+	 */
+	assigned-clock-rates = <0>, <451500000>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_native_in>;
+			};
+		};
+	};
+};

[PATCH 5/6] arm64: dts: freescale: imx8mp-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 display

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

Add a device tree overlay for the Toradex DSI to LVDS Adapter with the
Toradex Capacitive Touch Display 10.1" LVDS V2. The adapter connects to the
Verdin DSI_1 interface. It is based on the Texas Instruments SN65DSI84
DSI-to-LVDS bridge and drives an Opto Logic SCX1001511GGC49 10.1" WXGA TFT
LCD LVDS panel. Touch input is provided by an ILITEK ILI251x capacitive
touch controller.

Link: https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   5 +
 ...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 129 ++++++++++++++++++
 2 files changed, 134 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2bfed5ac66ac..236bfb6a1e19 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -510,6 +510,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
@@ -521,6 +522,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-panel-cap-touch-10inch-lvds-v2.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
@@ -532,6 +534,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-zinnia.dtb
 imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch-dtbs := \
 	imx8mp-verdin-wifi-dev.dtb \
 	imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
+imx8mp-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch-dtbs := \
+	imx8mp-verdin-wifi-dev.dtb \
+	imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
 imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
 	imx8mp-verdin-wifi-dev.dtb \
 	imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
new file mode 100644
index 000000000000..32828e9bc534
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex DSI to LVDS Adapter on Verdin DSI_1 with Capacitive Touch Display
+ * 10.1" V2, used on Dahlia (X17) and Development Board (X48) that expose DSI_1
+ * via a Samtec LSS-130 connector.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ * https://developer.toradex.com/hardware/accessories/add-ons/dsi-lvds-adapter
+ * https://www.toradex.com/accessories/verdin-dsi-to-lvds-adapter
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	panel-lvds-bridge {
+		compatible = "optologic,scx1001511ggc49", "panel-lvds";
+		backlight = <&backlight>;
+		data-mapping = "vesa-24";
+		power-supply = <&reg_dsi_lvds>;
+		height-mm = <136>;
+		width-mm = <217>;
+
+		panel-timing {
+			clock-frequency = <70000000>;
+			hactive = <1280>;
+			hback-porch = <55>;
+			hfront-porch = <55>;
+			hsync-len = <45>;
+			vactive = <800>;
+			vback-porch = <5>;
+			vfront-porch = <5>;
+			vsync-len = <3>;
+			de-active = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_lvds_bridge_in: endpoint {
+				remote-endpoint = <&dsi_lvds_bridge_out>;
+			};
+		};
+	};
+
+	reg_dsi_lvds: regulator-dsi-lvds {
+		compatible = "regulator-fixed";
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-name = "DSI_1_PWR_EN";
+	};
+};
+
+&backlight {
+	/* Verdin PWM_3_DSI (SODIMM 19) - PWM_3_DSI_LVDS */
+	pwms = <&pwm3 0 6666667 0>;
+
+	status = "okay";
+};
+
+&i2c4 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>,
+			    <&pinctrl_i2s_2_bclk_touch_reset>;
+		/* Verdin GPIO_9_DSI (SODIMM 17) - TOUCH_INT# */
+		/* Rising edge avoids spurious interrupts from the noisy falling edge. */
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+		/* Verdin I2S_2_BCLK (SODIMM 42) - TOUCH_RESET# */
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&lvds_ti_sn65dsi84 {
+	vcc-supply = <&reg_dsi_lvds>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dsi_lvds_bridge_in: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			dsi_lvds_bridge_out: endpoint {
+				remote-endpoint = <&panel_lvds_bridge_in>;
+			};
+		};
+	};
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <16000000>;
+
+	status = "okay";
+};
+
+&mipi_dsi_out {
+	remote-endpoint = <&dsi_lvds_bridge_in>;
+};

[PATCH 6/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS V2

[Leonardo Costa]

From: Leonardo Costa <leonardo.costa@toradex.com>

Add a device tree overlay enabling the Toradex Capacitive Touch Display
10.1" LVDS V2 on the Verdin Development Board with Verdin iMX8M Plus
Mezzanine expansion board. The panel connects via the i.MX8M Plus LCDIF
on the Mezzanine LVDS interface (J10). The panel is an Opto Logic
SCX1001511GGC49 10.1" WXGA TFT LCD LVDS and the touch input is provided
by an ILITEK ILI251x capacitive touch controller.

Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
Link: https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   5 +
 ...zanine-panel-cap-touch-10inch-lvds-v2.dtso | 107 ++++++++++++++++++
 2 files changed, 112 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 236bfb6a1e19..39c5f0db5203 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -509,6 +509,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
@@ -524,6 +525,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb
@@ -540,6 +542,9 @@ imx8mp-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch-dtbs := \
 imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
 	imx8mp-verdin-wifi-dev.dtb \
 	imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
+imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-v2-dtbs := \
+	imx8mp-verdin-wifi-dev.dtb \
+	imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtbo
 imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
 	imx8mp-verdin-wifi-mallow.dtb \
 	imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
new file mode 100644
index 000000000000..b78322907192
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Toradex Capacitive Touch Display 10.1" LVDS V2 on the Verdin iMX8M Plus
+ * Mezzanine LVDS interface (J10), used with the Verdin Development Board.
+ *
+ * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
+ * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
+ * https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
+ * https://www.toradex.com/accessories/verdin-imx8m-plus-mezzanine
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+	panel-lvds-native {
+		compatible = "optologic,scx1001511ggc49", "panel-lvds";
+		backlight = <&backlight_mezzanine>;
+		data-mapping = "vesa-24";
+		power-supply = <&reg_3p3v>;
+		height-mm = <136>;
+		width-mm = <217>;
+
+		panel-timing {
+			clock-frequency = <64500000>;
+			hactive = <1280>;
+			hback-porch = <20>;
+			hfront-porch = <20>;
+			hsync-len = <2>;
+			vactive = <800>;
+			vback-porch = <5>;
+			vfront-porch = <5>;
+			vsync-len = <3>;
+			de-active = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_lvds_native_in: endpoint {
+				remote-endpoint = <&ldb_lvds_ch0>;
+			};
+		};
+	};
+};
+
+&backlight_mezzanine {
+	/* Verdin PWM_2 (SODIMM 16) */
+	pwms = <&pwm2 0 6666667 0>;
+
+	status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		/* Verdin GPIO_3 (SODIMM 210) */
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+		/* Verdin GPIO_2 (SODIMM 208) */
+		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lcdif2 {
+	status = "okay";
+};
+
+&lvds_bridge {
+	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
+			  <&clk IMX8MP_VIDEO_PLL1>;
+	/*
+	 * This display uses 64.5 MHz pixel clock, so IMX8MP_VIDEO_PLL1 needs
+	 * to be 7 times 64.5MHz, or 451.5 MHz as the internal divider will
+	 * always divide the output LVDS clock by 7.
+	 */
+	assigned-clock-rates = <0>, <451500000>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			ldb_lvds_ch0: endpoint {
+				remote-endpoint = <&panel_lvds_native_in>;
+			};
+		};
+	};
+};

Re: [PATCH 6/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS V2

[Frank Li]

On Thu, Aug 13, 2026 at 10:33:35AM -0300, Leonardo Costa wrote:
> From: Leonardo Costa <leonardo.costa@toradex.com>
>
> Add a device tree overlay enabling the Toradex Capacitive Touch Display
> 10.1" LVDS V2 on the Verdin Development Board with Verdin iMX8M Plus
> Mezzanine expansion board. The panel connects via the i.MX8M Plus LCDIF
> on the Mezzanine LVDS interface (J10). The panel is an Opto Logic
> SCX1001511GGC49 10.1" WXGA TFT LCD LVDS and the touch input is provided
> by an ILITEK ILI251x capacitive touch controller.
>
> Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
> Link: https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
> Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
> ---

what's difference with Add Toradex Capacitive Touch Display 10.1" LVDS V2

why not share one dtso?

Frank

>  arch/arm64/boot/dts/freescale/Makefile        |   5 +
>  ...zanine-panel-cap-touch-10inch-lvds-v2.dtso | 107 ++++++++++++++++++
>  2 files changed, 112 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 236bfb6a1e19..39c5f0db5203 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -509,6 +509,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-panel-cap-touch-10inch.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
> @@ -524,6 +525,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-panel-cap-touch-10inch.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-ivy.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds.dtb
> @@ -540,6 +542,9 @@ imx8mp-verdin-wifi-dev-dsi-to-lvds-v2-panel-cap-touch-10inch-dtbs := \
>  imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-dtbs := \
>  	imx8mp-verdin-wifi-dev.dtb \
>  	imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds.dtbo
> +imx8mp-verdin-wifi-dev-mezzanine-panel-cap-touch-10inch-lvds-v2-dtbs := \
> +	imx8mp-verdin-wifi-dev.dtb \
> +	imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtbo
>  imx8mp-verdin-wifi-mallow-panel-cap-touch-10inch-lvds-dtbs := \
>  	imx8mp-verdin-wifi-mallow.dtb \
>  	imx8mp-verdin-panel-cap-touch-10inch-lvds.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
> new file mode 100644
> index 000000000000..b78322907192
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev-mezzanine-panel-cap-touch-10inch-lvds-v2.dtso
> @@ -0,0 +1,107 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright (c) Toradex
> + *
> + * Toradex Capacitive Touch Display 10.1" LVDS V2 on the Verdin iMX8M Plus
> + * Mezzanine LVDS interface (J10), used with the Verdin Development Board.
> + *
> + * https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
> + * https://www.toradex.com/accessories/capacitive-touch-display-10.1-inch-lvds
> + * https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
> + * https://www.toradex.com/accessories/verdin-imx8m-plus-mezzanine
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/clock/imx8mp-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +#include "imx8mp-pinfunc.h"
> +
> +&{/} {
> +	panel-lvds-native {
> +		compatible = "optologic,scx1001511ggc49", "panel-lvds";
> +		backlight = <&backlight_mezzanine>;
> +		data-mapping = "vesa-24";
> +		power-supply = <&reg_3p3v>;
> +		height-mm = <136>;
> +		width-mm = <217>;
> +
> +		panel-timing {
> +			clock-frequency = <64500000>;
> +			hactive = <1280>;
> +			hback-porch = <20>;
> +			hfront-porch = <20>;
> +			hsync-len = <2>;
> +			vactive = <800>;
> +			vback-porch = <5>;
> +			vfront-porch = <5>;
> +			vsync-len = <3>;
> +			de-active = <1>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			pixelclk-active = <0>;
> +		};
> +
> +		port {
> +			panel_lvds_native_in: endpoint {
> +				remote-endpoint = <&ldb_lvds_ch0>;
> +			};
> +		};
> +	};
> +};
> +
> +&backlight_mezzanine {
> +	/* Verdin PWM_2 (SODIMM 16) */
> +	pwms = <&pwm2 0 6666667 0>;
> +
> +	status = "okay";
> +};
> +
> +/* Verdin I2C_2_DSI */
> +&i2c2 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	touchscreen@41 {
> +		compatible = "ilitek,ili251x";
> +		reg = <0x41>;
> +		/* Verdin GPIO_3 (SODIMM 210) */
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <5 IRQ_TYPE_EDGE_RISING>;
> +		/* Verdin GPIO_2 (SODIMM 208) */
> +		reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
> +	};
> +};
> +
> +&lcdif2 {
> +	status = "okay";
> +};
> +
> +&lvds_bridge {
> +	assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>,
> +			  <&clk IMX8MP_VIDEO_PLL1>;
> +	/*
> +	 * This display uses 64.5 MHz pixel clock, so IMX8MP_VIDEO_PLL1 needs
> +	 * to be 7 times 64.5MHz, or 451.5 MHz as the internal divider will
> +	 * always divide the output LVDS clock by 7.
> +	 */
> +	assigned-clock-rates = <0>, <451500000>;
> +
> +	status = "okay";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@1 {
> +			reg = <1>;
> +
> +			ldb_lvds_ch0: endpoint {
> +				remote-endpoint = <&panel_lvds_native_in>;
> +			};
> +		};
> +	};
> +};
>

Re: [PATCH 6/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS V2

[Leonardo Costa]

On Thu, Aug 13, 2026 at 09:58:52AM -0500, Frank Li wrote:
> On Thu, Aug 13, 2026 at 10:33:35AM -0300, Leonardo Costa wrote:
> > From: Leonardo Costa <leonardo.costa@toradex.com>
> >
> > Add a device tree overlay enabling the Toradex Capacitive Touch Display
> > 10.1" LVDS V2 on the Verdin Development Board with Verdin iMX8M Plus
> > Mezzanine expansion board. The panel connects via the i.MX8M Plus LCDIF
> > on the Mezzanine LVDS interface (J10). The panel is an Opto Logic
> > SCX1001511GGC49 10.1" WXGA TFT LCD LVDS and the touch input is provided
> > by an ILITEK ILI251x capacitive touch controller.
> >
> > Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
> > Link: https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
> > Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
> > ---
> 
> what's difference with Add Toradex Capacitive Touch Display 10.1" LVDS V2
> 
> why not share one dtso?
> 
> Frank

Hi Frank,

There are two main differences:

1. The mezzanine one uses different backlight controll pins, so here we
use the 'backlight-mezzanine' node, instead of the 'backlight' one, used
in the one without the mezzanine.

2. The touchscreen GPIO and interrupt pins are also different with the
mezzanine board.

Leonardo

Re: [PATCH 6/6] arm64: dts: freescale: imx8mp-verdin: Add Mezzanine with Toradex Display 10.1" LVDS V2

[Frank Li]

On Thu, Aug 13, 2026 at 12:43:29PM -0300, Leonardo Costa wrote:
> On Thu, Aug 13, 2026 at 09:58:52AM -0500, Frank Li wrote:
> > On Thu, Aug 13, 2026 at 10:33:35AM -0300, Leonardo Costa wrote:
> > > From: Leonardo Costa <leonardo.costa@toradex.com>
> > >
> > > Add a device tree overlay enabling the Toradex Capacitive Touch Display
> > > 10.1" LVDS V2 on the Verdin Development Board with Verdin iMX8M Plus
> > > Mezzanine expansion board. The panel connects via the i.MX8M Plus LCDIF
> > > on the Mezzanine LVDS interface (J10). The panel is an Opto Logic
> > > SCX1001511GGC49 10.1" WXGA TFT LCD LVDS and the touch input is provided
> > > by an ILITEK ILI251x capacitive touch controller.
> > >
> > > Link: https://developer.toradex.com/hardware/accessories/displays/capacitive-touch-display-101inch-lvds
> > > Link: https://developer.toradex.com/hardware/verdin-som-family/add-ons/verdin-imx8m-plus-mezzanine
> > > Signed-off-by: Leonardo Costa <leonardo.costa@toradex.com>
> > > ---
> >
> > what's difference with Add Toradex Capacitive Touch Display 10.1" LVDS V2
> >
> > why not share one dtso?
> >
> > Frank
>
> Hi Frank,
>
> There are two main differences:
>
> 1. The mezzanine one uses different backlight controll pins, so here we
> use the 'backlight-mezzanine' node, instead of the 'backlight' one, used
> in the one without the mezzanine.
>
> 2. The touchscreen GPIO and interrupt pins are also different with the
> mezzanine board.


And there are for imx8mm
https://lore.kernel.org/imx/20260724-v1-verdin-imx8mm-dtbos-v2-3-9d7988bd76f6@toradex.com/

https://lore.kernel.org/imx/sr26lfvwasgcosfzcf4ydtwxwjjutlio2yqpgxldatpzjo7e4y@77k7gefnjzvl/

Any ways, it is too late for 7.3, we have enough time for 7.4 to discuss
work on optimization solution.

If use nexus connectors, we can share one dtso now if there are not
clock settings.

clock patches is close to pick up
https://lore.kernel.org/all/20260807-schneider-v7-2-rc1-eip201-upstream-v5-1-8785f9531cf0@bootlin.com/

Frank

>
> Leonardo