From: Long Zhao via B4 Relay <devnull+longzhao.ambarella.com@kernel.org>
To: Arnd Bergmann <arnd@arndb.de>,
Krzysztof Kozlowski <krzk@kernel.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
soc@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org, Brian Masney <bmasney@redhat.com>,
Lee Jones <lee@kernel.org>,
mfd@lists.linux.dev, Long Zhao <zl020895@163.com>,
Long Zhao <longzhao@ambarella.com>
Subject: [PATCH v5 11/12] arm64: ambarella: add ARCH_AMBARELLA and CV75 EVK DT
Date: Tue, 18 Aug 2026 18:31:25 +0800 [thread overview]
Message-ID: <20260818-cv75-v5-v5-11-7bbb12f0360f@ambarella.com> (raw)
In-Reply-To: <20260818-cv75-v5-v5-0-7bbb12f0360f@ambarella.com>
From: Long Zhao <longzhao@ambarella.com>
Enable ARCH_AMBARELLA and add a minimal CV75 SoC / EVK device tree for
console bring-up with the RCT clocks, UART, pinctrl and GPIO banks.
Signed-off-by: Long Zhao <longzhao@ambarella.com>
---
arch/arm64/Kconfig.platforms | 8 ++
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/ambarella/Makefile | 3 +
arch/arm64/boot/dts/ambarella/cv75-evk.dts | 30 +++++
arch/arm64/boot/dts/ambarella/cv75.dtsi | 176 +++++++++++++++++++++++++++++
arch/arm64/configs/defconfig | 2 +
6 files changed, 220 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index d2acfac73003..cb05eff267a8 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -26,6 +26,14 @@ config ARCH_SUNXI
help
This enables support for Allwinner sunxi based SoCs like the A64.
+config ARCH_AMBARELLA
+ bool "Ambarella SoC family"
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
+ select PINCTRL
+ help
+ This enables support for the ARM64 based Ambarella SoCs like CV75.
+
config ARCH_ALPINE
bool "Annapurna Labs Alpine platform"
select ALPINE_MSI if PCI
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index fc726b215f12..f1709eb5d915 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -4,6 +4,7 @@ subdir-y += airoha
subdir-y += allwinner
subdir-y += altera
subdir-y += amazon
+subdir-y += ambarella
subdir-y += amd
subdir-y += amlogic
subdir-y += apm
diff --git a/arch/arm64/boot/dts/ambarella/Makefile b/arch/arm64/boot/dts/ambarella/Makefile
new file mode 100644
index 000000000000..ddca3d7b18cc
--- /dev/null
+++ b/arch/arm64/boot/dts/ambarella/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_AMBARELLA) += cv75-evk.dtb
diff --git a/arch/arm64/boot/dts/ambarella/cv75-evk.dts b/arch/arm64/boot/dts/ambarella/cv75-evk.dts
new file mode 100644
index 000000000000..42a0fe24b83b
--- /dev/null
+++ b/arch/arm64/boot/dts/ambarella/cv75-evk.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ambarella CV75 EVK board
+ */
+
+/dts-v1/;
+
+#include "cv75.dtsi"
+
+/ {
+ model = "Ambarella CV75 EVK Board";
+ compatible = "ambarella,cv75-evk", "ambarella,cv75";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ memory@200000 {
+ device_type = "memory";
+ reg = <0x0 0x00200000 0x0 0x07e00000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ambarella/cv75.dtsi b/arch/arm64/boot/dts/ambarella/cv75.dtsi
new file mode 100644
index 000000000000..3b7948954968
--- /dev/null
+++ b/arch/arm64/boot/dts/ambarella/cv75.dtsi
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ambarella CV75 SoC
+ *
+ * Boot peripheral: UART0 console.
+ * Clocks: a single ambarella,cv75-rct provider.
+ */
+
+#include <dt-bindings/clock/ambarella,cv75-rct.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "ambarella,cv75";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a76";
+ device_type = "cpu";
+ reg = <0x000>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a76";
+ device_type = "cpu";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ahb@ffe0000000 {
+ compatible = "simple-bus";
+ reg = <0xff 0xe0000000 0x0 0x01000000>;
+ ranges = <0xe0000000 0xff 0xe0000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ s_scratchpad_syscon: scratchpad@e002e000 {
+ compatible = "ambarella,cv75-sec-scratchpad", "syscon";
+ reg = <0xe002e000 0x1000>;
+ };
+ };
+
+ apb@ffe4000000 {
+ compatible = "simple-bus";
+ reg = <0xff 0xe4000000 0x0 0x01000000>;
+ ranges = <0xe4000000 0xff 0xe4000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@e4000000 {
+ compatible = "ambarella,cv75-uart";
+ reg = <0xe4000000 0x1000>;
+ clocks = <&rct CV75_GCLK_UART0>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@e4010000 {
+ compatible = "ambarella,cv75-pinctrl";
+ reg = <0xe4010000 0x1000>;
+ ambarella,drive-strength-syscon = <&rct>;
+ ambarella,pull-syscon = <&s_scratchpad_syscon>;
+
+ uart0_pins: uart0-pins {
+ function = "uart0";
+ groups = "uart0";
+ };
+ };
+
+ gpio0: gpio@e4013000 {
+ compatible = "ambarella,cv75-gpio", "arm,primecell";
+ reg = <0xe4013000 0x1000>;
+ clocks = <&rct CV75_GCLK_APB>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ arm,primecell-periphid = <0x00000061>;
+ };
+
+ gpio1: gpio@e4014000 {
+ compatible = "ambarella,cv75-gpio", "arm,primecell";
+ reg = <0xe4014000 0x1000>;
+ clocks = <&rct CV75_GCLK_APB>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ arm,primecell-periphid = <0x00000061>;
+ };
+
+ gpio2: gpio@e4015000 {
+ compatible = "ambarella,cv75-gpio", "arm,primecell";
+ reg = <0xe4015000 0x1000>;
+ clocks = <&rct CV75_GCLK_APB>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ arm,primecell-periphid = <0x00000061>;
+ };
+ };
+
+ rct: clock-controller@ffed080000 {
+ compatible = "ambarella,cv75-rct", "syscon";
+ reg = <0xff 0xed080000 0x0 0x1000>;
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ assigned-clocks = <&rct CV75_GCLK_UART0>;
+ assigned-clock-parents = <&osc>;
+ assigned-clock-rates = <24000000>;
+ };
+
+ gic: interrupt-controller@fff0101000 {
+ compatible = "arm,gic-400";
+ reg = <0xff 0xf0101000 0x0 0x1000>,
+ <0xff 0xf0102000 0x0 0x2000>,
+ <0xff 0xf0104000 0x0 0x2000>,
+ <0xff 0xf0106000 0x0 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ad3bd3d9507b..ae5bcc6c9fc7 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -36,6 +36,7 @@ CONFIG_CRASH_DUMP=y
CONFIG_ARCH_ACTIONS=y
CONFIG_ARCH_AIROHA=y
CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_AMBARELLA=y
CONFIG_ARCH_ALPINE=y
CONFIG_ARCH_APPLE=y
CONFIG_ARCH_ARTPEC=y
@@ -560,6 +561,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_AMBARELLA=y
CONFIG_SERIAL_8250_BCM2835AUX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_8250_EM=y
--
2.34.1
next prev parent reply other threads:[~2026-08-18 10:32 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-18 10:31 [PATCH v5 00/12] Ambarella CV75 SoC minimal bring-up Long Zhao via B4 Relay
2026-08-18 10:31 ` [PATCH v5 01/12] dt-bindings: arm: add Ambarella CV75 platforms Long Zhao via B4 Relay
2026-08-18 10:31 ` [PATCH v5 02/12] dt-bindings: mfd: syscon: add Ambarella CV75 secure scratchpad Long Zhao via B4 Relay
2026-08-18 19:27 ` Krzysztof Kozlowski
2026-08-19 9:21 ` zl020895
2026-08-18 10:31 ` [PATCH v5 03/12] dt-bindings: clock: add Ambarella CV75 RCT Long Zhao via B4 Relay
2026-08-18 19:28 ` Krzysztof Kozlowski
2026-08-18 10:31 ` [PATCH v5 04/12] dt-bindings: pinctrl: add Ambarella CV75 pinctrl Long Zhao via B4 Relay
2026-08-18 10:31 ` [PATCH v5 05/12] dt-bindings: gpio: pl061: add Ambarella CV75 variant Long Zhao via B4 Relay
2026-08-19 7:47 ` Linus Walleij
2026-08-19 9:04 ` zl020895
2026-08-19 10:02 ` Linus Walleij
2026-08-18 10:31 ` [PATCH v5 06/12] dt-bindings: serial: add Ambarella CV75 UART Long Zhao via B4 Relay
2026-08-19 7:32 ` Linus Walleij
2026-08-19 7:37 ` Krzysztof Kozlowski
2026-08-19 9:26 ` zl020895
2026-08-18 10:31 ` [PATCH v5 07/12] clk: ambarella: add CV75 CCU driver Long Zhao via B4 Relay
2026-08-18 10:31 ` [PATCH v5 08/12] gpio: pl061: add Ambarella CV75 register layout variant Long Zhao via B4 Relay
2026-08-18 14:11 ` Andy Shevchenko
[not found] ` <79f6dc8c.2c42c.1a018dadd29.Coremail.zl020895@163.com>
2026-08-19 7:27 ` Andy Shevchenko
2026-08-18 10:31 ` [PATCH v5 09/12] pinctrl: ambarella: add CV75 pin controller Long Zhao via B4 Relay
2026-08-18 10:31 ` [PATCH v5 10/12] serial: 8250: add Ambarella UART driver Long Zhao via B4 Relay
2026-08-18 14:17 ` Andy Shevchenko
[not found] ` <162c0385.2c076.1a018b82fa7.Coremail.zl020895@163.com>
2026-08-19 6:50 ` Andy Shevchenko
[not found] ` <4dfe3bbe.2c34f.1a018d297c3.Coremail.zl020895@163.com>
2026-08-19 7:34 ` Andy Shevchenko
2026-08-18 10:31 ` Long Zhao via B4 Relay [this message]
2026-08-18 10:31 ` [PATCH v5 12/12] MAINTAINERS: add ARM/AMBARELLA SoC support Long Zhao via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260818-cv75-v5-v5-11-7bbb12f0360f@ambarella.com \
--to=devnull+longzhao.ambarella.com@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=bmasney@redhat.com \
--cc=brgl@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=lee@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=longzhao@ambarella.com \
--cc=mfd@lists.linux.dev \
--cc=mturquette@baylibre.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=soc@lists.linux.dev \
--cc=will@kernel.org \
--cc=zl020895@163.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox