[PATCH 2/3] arm64: dts: ti: k3-am62a7: add standby cpu idle state

[Kendall Willis <k-willis@ti.com>]

Allow the A53 cores to enter standby mode on the AM62AX SoC.
The standby idle state enables the CPU cores to enter WFI through the
CPUIdle framework.

Signed-off-by: Kendall Willis <k-willis@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62a7.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
index b6e5eee993706d6e868ead810202c90e69cd0394..c3adb7027560b4269927517ac4788e354ae2027e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a7.dtsi
@@ -51,6 +51,7 @@ cpu0: cpu@0 {
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 135 0>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_STANDBY>;
 		};
 
 		cpu1: cpu@1 {
@@ -68,6 +69,7 @@ cpu1: cpu@1 {
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 136 0>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_STANDBY>;
 		};
 
 		cpu2: cpu@2 {
@@ -85,6 +87,7 @@ cpu2: cpu@2 {
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 137 0>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_STANDBY>;
 		};
 
 		cpu3: cpu@3 {
@@ -102,6 +105,20 @@ cpu3: cpu@3 {
 			operating-points-v2 = <&a53_opp_table>;
 			clocks = <&k3_clks 138 0>;
 			#cooling-cells = <2>;
+			cpu-idle-states = <&CPU_STANDBY>;
+		};
+
+		cpu_idle_states: idle-states {
+			entry-method = "psci";
+
+			CPU_STANDBY: cpu-standby {
+				compatible = "arm,idle-state";
+				entry-latency-us = <100>;
+				exit-latency-us = <50>;
+				idle-state-name = "standby";
+				min-residency-us = <500>;
+				arm,psci-suspend-param = <0x00000001>;
+			};
 		};
 	};
 

-- 
2.34.1